As OEM diagnostic tool for Ford, VCM II provides full dealer diagnostic capabilities for most 16 pin Fords, including Ford vehicles from old to latest. Read/Clear DTCs, program ECUs, keys, PCM, ABS, Instrument Cluster, Air Bag, Injector Coding and so on. More function are added.
This tool is the same as SP177-C/SP177-C1, same function.
1.It achieves X431 series full car model and full-system diagnose function.
2.It communicates with your car by connecting DBSCAR with Bluetooth.
3.It integrates more application and service.
4.Launch X431 V 8'' Lenovo Tablet PC can replace X-431 V WiFi/Bluetooth and with 2 years free update on the official site.
5.It does not need to activate and can work directly
1. Online Version Kess V2 Firmware V5.017 support online service, newly add 140+ protocols,no tokens Limitation, program safer and more stable!
2. Newest software: Ksuite V2.47;Latest Firmware: V5.017
3. Red PCB
4. Get ECM TITANIUM V1.61 with 18475 DRIVER for free, sent online
Newest K-Suite V2.47 Software ,Newly Add 7400+ Vehicles
This is only main unit of Digiprog III with OBD2 cable, software version V4.94. With the use of the new Digiprog III, the odometer adjustment is a breeze. Intelligent accessories and extensive manuals are enclosed. This one has best price offer.
OBDSTAR X300 DP Plus PAD2 C Package Full Version:
Immobilizer+Mileage correction+Diagnosis+Special function (Oil reset +ABS+Battery matching+ECU programming+EPB+Throttle programming+Airbag reset+TPMS+Steering angle rest+OBDII+DPF+Injector code+Suspension matching+Gear learning+CVT learning+EEPROM+Key renewing+ECU cloning)Adapter(P001 programmer+C001 circuit board+C002 circuit board+W001 data cable+W002 data cable+W003 data cable+Toyota smart key Emulator)+others(Ignition coil+Remote tester)
Buy now, Free Get Renault Converter!
1) 2 in 1 scanner. One scanner support both Ford and Mazda vehicles.
2) Latest IDS support more newer Ford and Mazda vehicles.
3) Multi-language to choose.
MPPS V18 MAIN + TRICORE + MULTIBOOT with Breakout Tricore Cable
Warranty: one year
Package comes with Breakout Tricore cable.
Volvo 88890300 Vocom Interface for Volvo/Renault/UD/Mack Truck Diagnose is a tool that supports the repair and diagnostic process. It was developed to make repair shop tasks easier and more efficient. It can be used in the repair shop, out in the field, at the roadside, or during test drives.
1) version of SDP3 (V2.31 and V2.40.1 ) ,with one time activate for free.
2) Support full maintenance for all Scania trucks, buses, other heavy vehicles or heavy duty engines made by Scania
3) SDP3 has better performance than Scania VCI2
1) Read the common EEPROM
2) Program MCU on board, program ECU and so on
3) Update free online
4) Latest version: V4.8.7
New Red PCB KTAG V7.020 with 4 LED,added 140 more ECU types and color GPT Cable for GPT Function.It can easily read and decrypt the secret password,Unlimited Token.Supports Online Version operation.
1. Supports fastest add Benz Car keys,it is the fastest key programming tool to calculate the password at present.
2. Supports MB all keys lost, including 211,209,204,207,212,166,246,197,172,164 +, 216 ,special for European old models(W210, W203, W639, W220, W215, W169,W211) via obd directly.
3. CGDI Prog MB can calculate the password Once free each day.
The Latest Version is V220.127.116.11 now!
Iprog+ Iprog Pro is a powerful tool on Airbag,carradio,dpf off, ECU,IMMO KEY, MIL TO KM, PINABS,PINCODE SMATRA3,PINCODE SENSOR SPEED LIMIT,ODO Adjust,EEPROM,MCU-Atmel,Fujutsu,Microchip,Motorola,Motorola912EN,NECV850,BLR,CAN,CRC_Cript,ibutton,sd_unlocker,test
1.No matter what car model and which car year, KTM Bench can read and write Bosch(Infineon main chip) incl. Flash eeprog without opening the ECU box.
2.Reduce the risk of opening the box,ECU chip Tuning 1.99 can clone and copy infineon main chip,can modify the date,read and write date,upgrade the power etc.
3.The price is less than one tenth od its similar tools
4.No token limitation. Can calculate Checksums.
KTM-BENCH can not connect to internet, can not update, and do not use other software, otherwise it will destroy the device!
1. It is Made by Acrylic board, With Mesh and 4 Probe Pens.
2. LED works for 12V. After you connect with the probe,then you disconnect 12V battery for LED,it will work.The probe pin is adjustable.
3. This LED BDM FRAME is the best bracket for ECU Update/ECU Brush and Write/ECM Modified and programming/Probe holder/Dimsport aids.
4. Work on KESS,KTAG,FGTECH,BDM100,KTM100,CMD, DIMSPORT AIDS...ECM Chip Tuning Tools.
5. It is easy to be use,much better than old bdm frame.
V5.017 KESS Plus V7.020 KTAG ECU Programmer Plus BDM Probe Adapters Full Set
1. Latest Firmware and Software Version.
2. No Token Limitation
3. Get ECM TITANIUM V1.61 with 18475 DRIVER for free, sent online
Newest K-Suite V2.47 Software , Newly Add 7400+ Vehicles
Newest software: V2.47 (send online)
CGDI Prog MSV80 Key Programmer for BMW
1.High technical tool which mainly doing Car diagnose, programming and security maintenance
2.Support Key Programming for BMW CAS1/CAS2/CAS3, Support Key Matching and All key lost for CAS4 /CAS 4+，BMW ISN, FEM/BDC Key Match, BMW Enable/Disable Key, BMW F Series Program, BMW F Series Coding, EGS ISN, CAS Mileage Reset.
3.Support BMW Key Programmer with OBD Functions
This is a full set of BDM adapters for K-TAG/KESS /KTM/Trasdata chiptuning tool
This package includes:
1. Original V18.104.22.168 CGDI Prog MB Benz Key Programmer
2. EIS/ELV Test Line for Mercedes Benz
3. ELV Emulator for Mercedes Benz
FGTech Galletto 4-Master V54 BDM-OBD is a famous chip tuning tool for all cars, trucks, motorcycles, Marine, BDM MPCxx, BDM Boot Mode, checksum. This item cannot only work as FGTech Galletto 4-Master, but can also work for BDM-OBD.