Vediamo 4.2 and DAS transfer data from old ETC unit to new


A Mercedes owner simply made the procedure of transfer data from the old unit to the new unit, using MB Star diagnosis DAS development diagnostic software.


Device: MB STAR C3 multiplexer
Software: Xentry/DAS 2013.07
                  Vediamo with SCN coding database
 
Model: Mercedes-Benz 221.156

The extra thing have to do is:
Look at the old control unit version as shown in the picture:
Xentry-DAS-transfer-data-1
Then after installing new unit and transfer all data to it, next, go to:
Development Data ==> Control unit adaptation ==> Variant coding ==> F3
Then we chose from the list the same number we got in image below
Xentry-DAS-transfer-data-2
This must work as reported from many of my friends but i always do the online procedure.
 
Disclaimer:
First, you need to programming new vgs by Vediamo with hardware which you have in your old VGS
Then you will have your variant of coding.
 
TRY AT YOUR OWN RISK.