Program Toyota With G All Keys Lost by OBD2 via OBDSTAR X300 DP
Here is the step guide of how to do all key lost for 2013 toyota RAV4 with G via OBDII.
Master key and sub (G) key
G chip key
Connect X300DP with your vehicel through OBDII Port
Click “Diag Program” on the main menu
Choose “Type 2(with G72)”
Choose “Remote immobilizer(All key lost)” option
Then switch ignitino off and click OK
Switch ignition on and click OK
X300 DP will prompt you to switch ignition off and remove the key, just doing that and click OK
It is configuring the system, wait...
Then insert the removed key and switch ignition on
It is configuring the system, wait...
Switch ignition off and remove the key again
Then you can program keys as the following steps within 120 seconds
Here we program 1 master key and 1sub key.
Click OK to begin program keys
Step1: Insert the first master key, turn on the ignitino and wait for 5 seconds...
Step2: insert the second sub key (the G chip key),turn on the ignition switch and wait for 5 seconds
Step3: turn on the ignition switch quickly for 5 times, the security light will turn off, the programming is finished.
Done! Program key for 2013 toyota RAV4 with G successfully!
