(Solved)K+D CAN driver won't install on BMW 320d e46


Car model and year: BMW 320d e46
Car issue and my purpose:
I want to diagnose my BMW problem, I have ASC/ABS and Brake pads light on ... I checked and one sensor from brake pads was broken, I think a ABS sensor is down and I donĀ“t know which one.
BMW diagnostic cable I have:
I bought a K+D Can cable for 25 Euro.


Problem I came cross:
I can´t install the driver... Inpa and Ediabas work Fine ... I installed win xp and didn´t work so I changed the HDD whit windows 7 x64 to give a try... But same problem.
I tryed to install CDM v2.12.00 WHQL Certified.exe , run it as administrator, run it in win xp sp3 but nothing.
inpa cannot install-02
More inform:
Right click on the USB/UART device and go to properties, then the details tab, and look at the hardware ID. And this is what's there
USB\VID_0403&PID_0000&REV_0600
USB\VID_0403&PID_0000
Finally, I fixed by following method:
I go to the downloaded driver files, and into the ftdibus.inf and ftdiport.inf files.
Scroll down and I see a list of the VID and PID data, I edit the PID stuff to read 0000 like my lead, and then reinstall it, so find every instance of "PID_6001" and change it to "PID_0000" which should mean that the driver will recognize and accept the lead to work with.
I would probably go for the older 2.10 drivers
change the extension
from .pdf to .rar and try those, that's the 2.10 driver set, with the info files set to recognize the product ID as PID_0000