LED BDM Frame User Manual


Matched product:

LED BDM Frame With Mesh and 4 Probes Pens for FGTECH BDM100 KESS KTAG KTM100 ECU Programmer Tool Shipping from UK

LED BDM Frame With Mesh and 4 Probes Pens for FGTECH BDM100 KESS KTAG KTM100 ECU Programmer Tool Shipping from UK

34
  • Item No. SO433
  • Free Shipping
1. It is Made by Acrylic board, With Mesh and 4 Probe Pens.
2. LED works for 12V. After you connect with the probe,then you disconnect 12V battery for LED,it will work.The probe pin is adjustable.
3. This LED BDM FRAME is the best bracket for ECU Update/ECU Brush and Write/ECM Modified and programming/Probe holder/Dimsport aids.
4. Work on KESS,KTAG,FGTECH,BDM100,KTM100,CMD, DIMSPORT AIDS...ECM Chip Tuning Tools.
5. It is easy to be use,much better than old bdm frame.
1.BDM frame with adapters set
2.How to use the BDM frame aluminium
3.How does the BDM frame work with ECU programmers
4.BDM Frame with Adapters Review:Write EDC17C46 Vw Yeti 2014 with KTAG
1.BDM frame with adapters set:
 

This set includes: aluminum alloy support pair, acrylic sheet (LED lamp and interface),BDM probes 4, wire 4

 

ktag-bdm-frame-led-2 ktag-bdm-frame-led-3

2.How to use the BDM frame aluminium:

Insert the probe to connect the BOOT on the ECU board and CNF1, the legend for the public MED17.5.2 computer board.

ktag-bdm-frame-led-4

 

Applicable to open the ECU, to avoid welding jumper. In the acrylic board with LED light bar, help the case of poor light to see the hole of the board.

ktag-bdm-frame-led-5

Jumper for the plug-in, to reduce the trouble of welding the connection, easy to connect, and can be more than a series.

ktag-bdm-frame-led-6

LED power situation, the whole board can see clearly. LED power supply with ECU equipment with 12V power supply, connect the probe, you can disconnect the power supply, to the equipment for the

ktag-bdm-frame-led-7

The new LED light bar interface is fixed on the acrylic plate, for the straight type.

ktag-bdm-frame-led-8

Add a LED light to facilitate the case of poor light to see the computer board, the picture on the LED lights may be updated at any time, only for more practical.

ktag-bdm-frame-led-9

The tip of the probe is specially designed and scalable.

ktag-bdm-frame-led-10

 

3.How does the BDM frame work with ECU programmers:

Here, how to work with Ktag 7.020:

ktag-bdm-frame
 

4.BDM Frame with Adapters Review:Write EDC17C46 Vw Yeti 2014 with KTAG
Click here t o learn