FGtech Galletto 4 v54Review


Reviews of fgtech galletto 4 v54 china clones SE61-G, SE61-GB:

Gallettov54 CLONE
So far all good up to today:
Did Alfa 147 immo off (k line /boot mode)-100%
clone iveco edc16 BDM -100%
Mercedes 308benz sprinter edc5c2– k-line / flash file – 100%
VW crafter obd read flask – 100%
Opel Corsa-D CAN – Obd read -100%
BMW 320D E46 – BDM Clone ecu’s K-line obd read and Write – 100%
 
just receive one unit, install perfect tested on vag edc15 R/W ok other tests later..
 
My galletto v54 work K-line.
I have read my vw passat edc15 with mpps cable.
After read i change the tool to galletto.
Galletto works fine
Ecu id —> ok
Flash read —> ok
Galletto works fine after read ecu with mpps tool
 
I have SE61-G tool : https://www.obdexpress.co.uk/wholesale/fgtech-galletto-4-master-bdm-tricore-obd-function.html
I have done immo off on alfa with ecu ME 7.3.1
R/W ok
 
I tested mine from obnauto on bdm edc16 dde7 bmw e90 and worked ok.
 
This old me/.1, esemple 2.7biturbo, read about 4m, write 25m with old galletto 1250.
 
Tested my FGTech Galletto V54
Golf Plus 2006 2.0TDI —> OBD CAN WORK – Read & Write
BMW X5 2007 3.0TDI —> OBD CAN WORK – Read & Write
K-Line don’t work —> For K-Line i use MPPS V13
BDM not work but my Probe are not ok —> i Order new from EVC (EVC probe without any adapter, work 100% on Galletto V54)
 
MY GALLETTO V54 NOT WORK ON BDM!!!
TESTED ON BMW E70 3.0D EDC16
TESTED ON VW PASSAT 1.9TDI EDC15 NOT WORK
 
Piasini= ok works well – fgtech OBD2 car runs=ok R/W, off the panel instrument – OBD2 does not work bench.
 
Opel EDC16C9 can only write by obd. For read u have to bdm
 
Fgtech V54 —> work fine K-line and BDM (BDM tested Delphi CRD.11 Mercedes W204 220CDI)
 
Result: from ecutool
– K-Line don’t work (tested on VW Passat 2002 1.9TDI EDC15P)
– Can work (Tested on BMW X5 E70 2007 3.0D / VW Golf Plus 2006 2.0TDI)
– BDM don’t work (tested Delphi CRD.11)
– Tricore not tested
 
Test with https://www.obdexpress.co.uk/wholesale/fgtech-galletto-4-master-bdm-tricore-obd-function.html
– K-Line Work (tested on VW Passat 2002 1.9TDI EDC15P)
– Can not tested
– BDM Work (tested Delphi CRD.11)
– Tricore not tested
 
I did an Audi A4 2.0 tdi 2008 yesterday dpf delete, eco/power map which had edc17cp14 inside
 
have the one with red LED next to power jack. I gave tested on k line works fine, CAN works fine, tricore works fine. Not tested on bdm yet
 
Tricore 2010 audi a6.
K line. 2005 Skoda octavia vrs.
 
Today GP read 1_3 MJT 75 hp
Twenty-six seconds to read.
File 2 MB
 
BMW X6 3.0D 2008 —> EDC16 OBD read and write WORK
 
it failed to write an edc16c35 from bmw.
then i have to recovery through bdm.
 
Read and written
Citroen C3 Bosch EDC 16C34
all good
5 minutes total to write.
 
Read and written
BMW 525 (E39)
Everything Good.
 
via obd i can read only flash and MPC for some ecu, not e2p!
the readout for edc17 or med17 and most of ecu is always partial, not full!
for mini no problem with all ecu (without Tprot), by obd work good (if tool have big quality)
 
 
FGTECH V54: It works well “can-bus” and k-line.
 
i cant read mine skoda superb to, but i succesfuly read it in vw golf 4 section
 
Today i have read with my v54, an Alfa 159jtdm 150hp edc16c39 2 times without problems by obd k-line, read time 40 minutes !
 
Renault megan 3 2010 y.tried SID 305 boot mode not work.via obd only ident,galletto can`t read flash.
 
galletto work obd with Sid 305 only old version ,from 2008 y
 
my gall V54 in boot mode not work with SID 305. obd read only ECU data
 
I once had a problem with one sid305 (interface cmdtec), and can only read-write with cold engine.
 
Mercedes V Class 2003 220CDI EDC15C5 —> K-line read and Write WORK
 
i tried today megan 3 sid 305 via obd work good.but ~~ one the table~~ not work via obd. maybe different ECU
 
EDC16c9(Opel) OBD CAN-R/W—OK
EDC16c9(Opel) BDM-R/W—OK
EDC15P(VW Bora)K line R/W—OK
EDC16c3(Peugeot 307 1.4HDI)–K line and BDM R/W 100% correct
 
EDC16c3(peugeot)K line—only ecu data—Galletto mini EU version Portugal(my A…..s)
EDC16U1(VW Touran)K line—-only ecu data ,no read
 
FG V54 with these components that all works: jtag BDM Boot OBD 
 
tested Galletto v54 with Siemens PPD1.2, OK for me
 
Galletto v54 worked onZ22SE Vectra B
 
VW Golf5 1.9TDI OBD r/w Flash – 100%
V54 china clone
audi s3 med9.1 read/write ok obd
mercedes glk delphi CRD2 read/write ok obd
peugeot 207 edc16c34 read/write ok obd
golf6 edc17cp14 read/write ok obd
 
Audi 2009, Tiguan 2009, Passat 2009, Golf 6 2009, all EDC17 read/write via OBD2 with Galletto v54 China without problems.
 
Sure edc17cp04 and edc17cp14 year 2009 can read-write in obd.
But edc17cp20, edc17cp44,etc, etc same year, have tricore protected active, and if you write in obd, ecu bloqued.
 
i tried today Passat b7 1.6 tdi 2011 , pcr 2.1.but can`t read flash via obd.
but if i select vw GOlF 6 pcr 2.1 or VW caddy pcr 2.1 read flash good. like audi A3 can`t read too
 
I’ve done a 2010 passat without problem unlock then read/write via obd
 
so far my Galletto v54 clone has been perfect
 
tested read & write on the RENESAS Renault S3000 with FG54
i can read BDM/JTAG but can’t write Boot mode.
galletto-v54-Renault-S3000