Renault ECU decoders will be recommended for you here.These two has been successfully tested by users, who talk about it on forums.
Device to use: Mini Pro TL866A EEPROM Programmer
/Wellon Universal Programmer
/Fgtech Galletto V54 Mater
ECU type: Renault Siemens Sirius 32N
Feedback:
Customer A
Device recommended: TL866 Mini pro programmer “if You are planning to work frequently on those ecu I recommend to buy TL866 Mini pro programmer.
With tsop44 adapter, this tool is very stable for reading F200 flash fitted on Sirius32”
Customer B
Device recommended: TL-866 programmer & Wellon programmer
I also have TL-866 programmer and that one is working good too.
wellon tells you which pins does not have good connections ...
I bought TL-866 programmer with with tsop44 adapter... it's good to have backup tools.
Customer C
Device recommended: Fgtech galletto
Read Siemens sirius 32 with Fgtech galletto on boot mode flash.
The wiring diagram below:
Red ----------------> pin 29
Red ----------------> pin 30
Black ----------------> pin 3 ground
Green ----------------> pin 56 K-Line
Yellow----------------> pin 26 L-Linea
Gray wire you can use for boot 29f200
(Gray wire has already 1000 ohm resistor )
