Clone Orange5 reviews/test report


Here is some test reviews from Clone Orange5 user:
1)
I buy Orange5 china clone. Work great. Now i check in hc05b8, hc11e9, end eproms. All read and write very fast.
I have never had any problems with clone, everything works as it should, knock on wood.
I don’t know is there any scripts but softwares for immo,radio and dash coming together with clone.
 
2)
On Hc908az60 secured it work’s good.
I have 4 secured mcu, and they work ok.
I have tried 68hc11, allot of eproms, and it work’s just perfect.
I don’t have right now anithing else.
Clone but includes – Immo HPX 9V0
confirmed that oem orange 5 comes with immo hpx 9.0 and adapter set
 
3)
I have clone and work perfect.
2j74y ok
35080 ok
Tms immo opel ok
Hc05 immo old vw ok
 
4)
I have Orange 5 clone and everything works perfect for now.
I tested with 1J35D,4J74Y,1D69J,0D69J,0F82B,3K91D,TMS370c702
 
5)
OEM clone seem work good after report from some users. Just need rework solder points on Moto adapter.
I am not aware of a clone Orange 5 yet. But if it says not updatable then it must be a clone. Original ones are sold by Chinese sellers as well. Prices can vary depending on the bundled software.
 
6)
i have this Orange5 clone and work everytime with him. not work car radio option.i think isn’t bad clone and not expansive.
 
7)
I have just bought orange 5 programmer and all seems to work well happy
I got fed up with my genuine upa usbs programmer which didn’t seem to want to read anything, it went through the motions and said success reading a load of zeros gavel
Straight out of the box this Orange 5 clone read and write eproms 95640 and 95P08C3 in circuit no problem with no errors, but I had to make sure that my connections to the chip via test clip were all good and then tool work like charm nerd
I think I like it so far.
 
8)
I have it for a long time and for now everything is working properly.
One of the few clones that works well and works as an original.
So far its reading and writing (with verify) all eeproms i try. Good tool so far.
Some adapters are not supplied and must be purchased separately Adapters should be resolder for sure but it isn’t so bad ,at all
The main point orange 5 clone isn’t so bad as clones can be.
Good investment for sure .
9)
I like PIN checking function (test insertions) very much .It saved my job a lot of time.
In combination with my UPA -S,CarProg,and mini pro TL866 a lot of job can be done successfully .
Great programmer. All that is stated works. If the speed of exchange is not important, you can do a lot. Many good calculators.

10)
I have it for a long time and for now everything is working properly.
One of the few clones that works well and works as an original.
Some adapters are not supplied and must be purchased separately
 
So far its reading and writing (with verify) all eeproms i try. Good tool so far.
 
I like PIN checking function (test insertions) very much .It saved my job a lot of time.
Great programmer. All that is stated works. If the speed of exchange is not important, you can do a lot. Many good calculators
 
It’s almost the same as the price on the Orange website. Besides – on the webpage is written OEM.
Clone but includes – Immo HPX 9V0
confirmed that oem orange 5 comes with immo hpx 9.0 and adapter set
 
On Hc908az60 secured it work’s good.
I have 4 secured mcu, and they work ok.
I have tried 68hc11, a lot of eeproms, and it work’s just perfect.
 
I have it 5.7 too and work perfect iven on win 10 x64..cas4-cas4+ and many more done no problem.. I also want to buy orange5
 
I have just bought orange 5 programmer and all seems to work well happy
I got fed up with my genuine upa usb s programmer which didn’t seem to want to read anything, it went through the motions and said success reading a load of zeros gavel
Straight out of the box this Orange 5 clone read and write eeproms 95640 and 95P08C3 in circuit no problem with no errors, but I had to make sure that my connections to the chip via test clip were all good and then tool work like charm nerd
 
 
TIP: Orange 5 Original vs Clone:
Do not get confused by Orange pricing. Orange charge separately for the device, the immo software, the airbag software and the radio software, plus a few specials.
All this comes with the clone.
To compare the two, you must add up all the costs from Orange. There is a very large saving if you buy the clone. But you cannot update it and you have no support from Scorpio. It will suit some people for sure. The adapters are poor quality, and for many the hardware does not work. No doubt as time goes by will will see huge threads about how to fix them. The company who makes it does not have a good reputation for quality or support.
I do not regret buying original Orange5 and Tango key programmer. But when I did there were no clones available as an alternative.
As for the Tango clone, it’s PCB and components are nothing like the original, and of a very poor quality. I have not seen inside an Orange5 clone yet.

11)
Orange 5 programmer test reports:

2j74y ok
35080 ok
TMS IMMO Opel ok
Hc05 IMMO old VW ok

All functions open 1-10 except car radio get error, tested reading usual EPROMS all good. tested IMMO login code from dump, TMS VW works.

Already did few cars. IMMO SW included and also activation for other sw. No problem till now , of course I not test all but with some NEC all ok .

Everything works as it should, knock on wood. Not sure is there any script but software for IMMO, radio and dash coming together with clone.

Can extract the dump of an EEPROM with a programmer and modify it with the software came with the Orange.

Check in hc05b8, hc11e9 EEPROMs. All read and write very fast.

Have 4 secured MCU and they work ok. On Hc908az60 secured and on 68hc11 it work’s just perfect.

Tested with 1j35d, 4j74y, 1d69j, 0d69j, 0f82b, 3k91d, TMS 370c702 OK!
 
 
What’s the difference between the Orange 5 original version and Clone ?
 
Price:
Orange5 original price: US$1,299
Orange 5 clone price: US$179
 
Outlook:
Left: Original
Right: Clone
original-orange5-5
Package:
OEM Orange 5 (clone) : Blue board and adapters
Original Orange5: Green board and adapters
Clone comes with software CD cause software is not able to download and update
Original does not with CD, you can download it on official website scorpio-lk.com.
Orange5 original comes with more adapters
original-orange5-1 original-orange5-2
PCB layouts:
original-orange5-3 original-orange5-4
So, what’s the difference when using Orange 5 genuine and copy version? Read the reviews here. Customers talk the truth.
 
Genuine Orange 5 review:
Orange 5 Original vs Clone:
Do not get confused by Orange pricing. Orange charge separately for the device, the immo software, the airbag software and the radio software, plus a few specials.
All this comes with the clone.
To compare the two, you must add up all the costs from Orange. There is a very large saving if you buy the clone. But you cannot update it and you have no support from Scorpio. It will suit some people for sure. The adapters are poor quality, and for many the hardware does not work. No doubt as time goes by will will see huge threads about how to fix them. The company who makes it does not have a good reputation for quality or support.
 
I do not regret buying original Orange5 and Tango key programmer. But when I did there were no clones available as an alternative.
 
As for the Tango clone, it’s PCB and components are nothing like the original, and of a very poor quality. I have not seen inside an Orange5 clone yet.