ISCANCAR update the firmware version 1.2.0
Now supports the following functions:
1. Volkswagen Diagnostics - Diagnostic Control Unit can all Volkswagen within the control unit supports input (current support agreement CAN TP2.0, UDS, Kline1281, Kline2000)
1) Get ECU information
2) read the fault codes (according to the language selection, support in English DTCs queries)
3) The data stream read (you can read the data flow information in the car, support CAN, KLine protocol)
4) Clear fault codes (DTC clears in the car)
5) Basic adjustment (open / close the basic setup information)
6) component testing (test control unit element status)
7) channel matching (based on the matching channel, you can change some settings in the car, you can also do key learning, remote learning)
8) The control unit code (supports encoding reprogramming of the control unit)
9) User mode (allows users to manually enter the diagnostic instructions)
10) landing system (supports the use of a password to log into the system)
11) Special function - depending on the control unit have different special features (special function details)
. a) Engine System - Change mileage, Read password, security status, matching control unit (supports changing the engine mileage, read PIN from the engine, CS, change the security state of the engine, replacing the second-hand engine parts)
. b) transmission system - matching control unit (support the replacement A6 / Q7 Transmission Used Parts)
. c) start authorization system - the key to learning, matching control unit (the key to start authorization system supports learning, similar to the A6 / Q7; support the replacement A6 / Q7 J518 Used Parts)
. d) airbag system - Repair balloon (balloon repair data)
. e) Instrument System - Change mileage, Read password, key learning, repair RB4 / RB8 does not start (supports a variety of K-line instrumentation, four generations of anti-theft meter reading PIN, CS, key learning instruments based on K-line)
. f) anti-theft system - read password, key learning, matching control unit (supports read the password from a variety of anti-theft box, based on fourth-generation anti-theft alarm system and key learning cartridge can be replaced Magotan / CC comfort computers used parts, replacement A8 / Touareg Kessy Used parts)
g) electronic steering system - matching control unit (supporting electronic steering column lock replacement PQ35 Used Parts)
Special Function Description:
(1) Engine Change mileage: Support EDC15x, EDC16x
(2) The engine reads the password: Support ME7.1.1 / 7.5 / 7.8, MED17 / EDC17 (supports only password), MED9.1, MED9.5.10, EDC15x, EDC16x, Simos PPD1.1 / 1.5 (Siemens), Simos benzin (Siemens)
(3) engine immobilizer status: Support EDC15x, EDC16x, ME7.5
(4) matches the control unit can be used to replace the parts: support engine, A8 / Touareg / Phaeton Kessy, Magotan / CC comfort computer, PQ35 electronic steering column, A6 / Q7 / Allroad gearbox, A6 / Q7 / Allroad J518 control unit
(5) .K line instrument theft box: supports reading passwords, change mileage (vdo, RB4, RB8, Magneti Marelli, and other old models K-line instrumentation and alarm box)
(6) Key Learning: K-line instrumentation and support a variety of anti-theft box key learning, support CAN instrumentation and alarm system key learning, support A6 / Q7 / A8 / Touareg / Phaeton key to learning, support UDS four generations of anti-theft key instrument to learn (include intelligent Key). according to different types, respectively learning systems within 05,17,25
(7) meter reading Password: password and CS supports reading from four generations of security instruments (CAN, UDS) (not supported NEC35xx types)
(8) Instrument Change mileage: Support CDC32xx, NEC24C32, NEC24C64, 2013, paragraph NEC + 24C64, 2012 color display tables, the 2013 color table, NEC95320, Motorola MM7, NEC95320 (JCI), 2013 Bora / Jetta (JCI), Sunny 1.6,2.0, A4 / Q5 / A5, A6 / Q7, A3 / TT / R8, 2013 shall Q3, A8 (2003-2011), Touareg (-2011), visteon instruments, etc.
(9) Repair airbags: airbags can fix errors
2.OBD Diagnostics - engine supports multiple depots read fault codes, you can check the specific reasons for the fault code number and check the previous fault code
3.J2534 adapters - can be modeled as a J2534 adapter to transmit and receive operations
4. System Settings
1) Set the tone - Open / Close
2) the time and date - set the current time
3) Record - Insert the SD card only when this feature is enabled, not inserted SD or do not want to record, turn off
4) Show Time - Displays the current system time
5) Set the language - support Simplified Chinese and English
5. About - can query the device serial number, firmware version number, etc. (2014.11.5 date with the latest firmware version 1.2.0)
