Piwis Tester II for Porsche technical support and error solution


Part 1: How to update the firmware for Piwis Tester II for Porsche
1) Connect your PC with internet. 
2) Connect porsche piwis ii with your PC
3) Choose "tool" on menu. Choose measuring equipment, then online update


4) Click update




5) After the green bar reach the end, it means update is finished. Then you can close the update window



Part 2:
When i connect this piwis tester II with PC and Car, the 4 light on the main unit and usb is blinking slow constantly. If you put out the USB connector and then put back in you see all lights light up and then the same again. On the software, it give me prompt like this:
" 99010: This diagnostic system could not be initalised.
99011: Comm. module not connected. Please check.
Repeat communication setup with [F8].
Press [F12] to start simulation mode."
porsche piwis tester ii error solution

Solution: 
This problem is your HDD lack one file. If you meet this problem. Please send your order number to sales@OBDexpress.co.uk to contact us to solve it for you by teamviwer.
We will send you a file, then fix this online. It is very quick, will not be over 5 minutes.

Learn moreļ¼š
How to set Porsche PIWIS 2 as a virtual machine?