Shipping From UK

Digiprog 3 change mileages of Smart ForTwo 2007


Digiprog 3 and Smart ForTwo 2007 BOX and TACHO. Possible?
Yes. Here you go.
Part 1: Smart ForTwo 2007 BOX
Part 2: Smart ForTwo 2007 TACHO
Part 1: Smart ForTwo 2007 BOX
 
Requires plug 48:
ST 48                                    
         yellow       18     yellow      
         green        17     green       
         white        7       white       
         brown       13     brown
digiprog-3-smart-fortwo-2007-box-3
SMART Model 2007 BOX
digiprog-3-smart-fortwo-2007-box-1
!!! ALWAYS FOLLOW THE BATTERY !!!
Remove box and disassemble.
digiprog-3-smart-fortwo-2007-box-2
Position of the box: driver footwell left above the steering column.
digiprog-3-smart-fortwo-2007-box-4.j
Connect the plug 48 with the marked solder points
digiprog-3-smart-fortwo-2007-box-3
digiprog-3-smart-fortwo-2007-box-5
Attention the big fuses have to be pulled to open the box; Remember slots.
Select the program: car / truck - SMART - FORTWO - BOX.

digiprog-3-smart-fortwo-1
digiprog-3-smart-fortwo-2
The DIGIPROG 3 indicates the old / wrong KM level.
Program the new / correct KM booth and you're done.
The speedometer must gem.
 
Part 2: Smart ForTwo 2007 TACHO
Requires plug 01:
ST 1           clip 3M 923650-08
         1                1
         2                2
         3                3
         4                4
         19              5
         6                6
         5                7
         7                8

digiprog-3-smart-fortwo-2007-tacho-2
SMART FORTWO 95C640
!!! ALWAYS FOLLOW THE BATTERY !!!
Remove and disassemble the speedometer.
digiprog-3-smart-fortwo-2007-tacho-1
digiprog-3-smart-fortwo-2007-tacho-2

Carefully peel off the pointer.
Locate the chip 95C640
digiprog-3-smart-fortwo-2007-tacho-2
The designation can also be 25LC640.
 ATTENTION: you have to unsolder this chip.
First, always make a backup of the chip via the EEPROMM program.
Select the program: CAR / TRUCK - SMART FORTWO - CHIP 95C640.
The DIGI PROG displays the old / wrong KM level.
Program the new / correct KM booth and you're done.
The box must gem.