Shipping From UK

How to install Diatronik SRS+DASH+CALC+EPS OBD Tool

Matched product:

V2.0.0.11 Diatronik SRS+DASH+CALC+EPS OBD Tool Support All Renesas and Infineon with USB Dongle

V2.0.0.11 Diatronik SRS+DASH+CALC+EPS OBD Tool Support All Renesas and Infineon with USB Dongle

Latest price:1,182.00
1,045.0012% off
  • Item No. SR25
  • Free Shipping
1. Diatronik Support all renesas and Infineon airbag restore by OBD2 up to 2016;
2. Support Dash mileage correction via OBD2;
3. Support Airbag Calculator via USB;
4. Diatronik have many more function like OBDII Diag, IMMO Tool, G-Prog in develop, will add later.
How to use Diatronik SRS+DASH+Calculation+EPS OBD Tool, including:
1. Install Software.
2. Settings.
3. Update
4. Calc Tool.
5. Work for OBD Module
6. Work with SRS Toyota-Subaru
7.How to update Diatronik SRS+DASH+CALC+EPS OBD Tool(with Diatronik key)

1.  Install Diatronik Software
Operating system: Windows 7/Windows 10 above
After receiving the security key, you turn to your software supplier and he sends you an archive with the program files and license.
Unpack the archive to any convenient folder on your computer, insert the security key into the USB and you can run the program.

Driver for OBD adapter can be downloaded here

Included with the program is a program ELS27Baudrate.exe With her you can check and configure OBD2 adapter supplied,
please note that the speed of the adapter in this program, you need to set 2mb/s (2 000 000 ).

2.  Settings
In the settings menu, select the COM PORT on our adapter, and close the window, when the window is closed, the program will create a ini file with the settings
and remember the port number. Button Select Prog Exe provides the flexibility of running third-party program programmer, to work with dumps.

3.  Update Diatronik software
Update the program online in the menu 'ONLINE'.

The program checks for updates, and when available offers download.

Updates are stored in the root directory of the program in the Update folder, if this folder you do not, the program will create it automatically.

Updates come out about 1 every 1-2 weeks

4.  CalcTool
Menu CalcTool you can work with dumps ECU SRS and ODO.

5.  Work OBD Module.
If the module you are seeing this message, it means that the module is still being tested and will soon be available.

All modules have built-in assistance for connecting and working with the module for the call, click the INFO button

6.  Work SRS Toyota-Subaru SRS.
Work with blocks SRS TOYOTA - SUBARU is made in two stages, work mode and Boot Mode.

Work Mode.
In the work mode read and erase main flash memory and save it.
Reading is possible both on the table and in the car.

Boot Mode.
In Boot Mode it is writing to flash and erasing EEPROM, the data about the accident.
For unit transfer in boot mode, you must erase the flash in operating mode, connect RESET PIN of MCU with +5 volts through a resistor of 4,7-10kOm
After writing flash, the resistor must be removed.

7.How to update Diatronik SRS+DASH+CALC+EPS OBD Tool(with Diatronik key)

Q: Please can you tell me how to update Diatronik SRS+DASH+CALC+EPS OBD Tool ?

A: Diatronik key update help. Here you go.


  1. After the first run utility screen will appear where you select to Start new dongle remote update session:how-to-update-Diatronik-SRS+DASH+CALC+EPS-OBD-Tool-1
  2. On the next page displayed is the generated update request (number-question) is a sequence of hexadecimal characters containing information about your key:

The update query can be stored in a file (button [To file]), copied with the button [To clipboard] or sent as email to developer ([mail]).

Archive the text file with results using your GCT serial # as file name and email it to developer. The update program can be closed at this stage. Wait for response email from the developer.

  1. Data updates are transmitted in encrypted form and can only be used once
  2. When generating the update data and during firmware update the key performs a series of checks on key options (ID, Shared code, and some others). This excludes the possibility of substitution of the key.

You must then run the client update utility again and select “Resume previously started remote update session”, then click [Next] button.



The screen will display the wizard page that contains the input field and display dump updates. Enter the dump received via email using one of the buttons: [Paste] or [Browse...]:

After inserting the dump and pressing [Next] button the operation for updating the key memory with new data. Then last screen will display the outcome of the operation:


Next steps are only needed when the update key is in fact the firmware or image template. If the update was performed based on data of the image file, then step 3 is the final stage of the upgrade.


In the process of updating the key memory client utility will generate the final code-confirmation containing information about the updates (successfull/unsuccessfull). Code-confirmation is to be saved (button [To file]) or copied  [To clipboard], renamed using your serial # as file name and sent to developer of the application by any convenient way (email, PM, Skype: moe03071 ).


Youtube video (Russian)

Crdits to Moe who share all above with us.