Shipping From UK
Home - Products - Technical Service - How To Solve Ford IDS 105 VMware Error
« Go Back

How To Solve Ford IDS 105 VMware Error

Matched Product
New Version VCM IDS 3 OBD2 Diagnostic Scanner Tool for V105.1 Ford and V104 Mazda

New Version VCM IDS 3 OBD2 Diagnostic Scanner Tool for V105.1 Ford and V104 Mazda   Item No. SP277

Buy It Now:€299.00       Click Here to Shop
Highlights:
1.No need the virtual machine to install the software.
2.VCM IDS Ford Version: V105.01. VCM IDS Mazda Version: V104.00.

Description

Part 1 :How To Solve Ford IDS 105 VMware Error
Part 2 :(Solved) Ford VCM IDS 3: “not VCI” and “not license”

Part 1 :How To Solve Ford IDS 105 VMware Error
Issue:
When starting virtual machine, some users have got Ford IDS VMware Workstation Error: 64 bit operation is not possible.
This virtual machine is configured for 64-bit guest operating systems. However, 64-bit operation is not possible.


This host supports Intel VT-x, but Intel VT-x is disabled.

Intel VT-x might be disabled if it has been disabled in the BIOS/firmware settings or the host has not been power-cycled since changing this setting.

(1) Verify that the BIOS/firmware settings enable Intel VT-x and disable ‘trusted execution.’

(2) Power-cycle the host if either of these BIOS/firmware settings have been changed.

(3) Power-cycle the host if you have not done so since installing VMware Workstation.

(4) Update the host’s BIOS/firmware to the latest version.

 

ford-ids-105-64bit-error

That means the cpu isn’t configured / isn’t capable of 64bit virtualization. Check the bios setting

 

To be honest… Just turning nonpersistent off before the first start is all users need to do… And also click i moved it.
Leaving internet on doesn’t matter.
In fact users need to keep it on if users wanna do programming from the server.
So, about the Vmware error on start up:

Just change computer BIOS about virtualization that was disabled, change to enabled. Then IDS is working ok!!!!

ford-ids-105-64bit-solution

 

A good tip- How to install Ford IDS 105 on a VMware machine:

> Downloaded & extracted:

Ford IDS V105.01 + VCM II Manager 2.3.85.7: (Pass: nK6gE84)

https://mega.nz/#!l1UVBCLa!w1Out18LqVP3QIboAfa3YCmF6z6bF8W1Tb2vt8Pily0

https://mega.nz/#!519CwI5I!V57SrxIcMAtp87lg3iv-zDKU0Ueu8T5jPBc9sdUg-5g
> Opened in VMWARE 10.

(In one of the first couple of lines in config file change the “12” to “10”)
> Clicked “I MOVED IT”
> Turned of internet (dunno if it matters).
> Turned off nonpersistent.
> Started Up IDS 105.1 VMWARE
> Plugged in OEM VCM and installed drivers.
> Made cosmetic changes, performance changes to WIN7.
> Opened IDS and made settings changes
> Ran Shut down command in Guest System.
> Turned nonpersistent back on.
I did 6 module programming on a 2013 explorer yesterday and it went flawlessly with VCM2 clone (SP177-C1 it’s a wifi version)..

Part 2 :(Solved) Ford VCM IDS 3: “not VCI” and “not license”

Ford VCM IDS 3 with error messages “not VCI” and “not license”

 
Not connected to VCI (No VCIs Detected)
SOLVED-VCM-IDS-3-not-VCI-not-license-1
IDS software – Production license not found

An active IDS software license is not found and is required for vehicle communications.

SOLVED-VCM-IDS-3-not-VCI-not-license-2
SOLVED-VCM-IDS-3-not-VCI-not-license-3

Solved!!

Go to FVDI2 Quick Start, then IDS Ford, then start Ford diagnostics here.

Works like a charm.
SOLVED-VCM-IDS-3-not-VCI-not-license-4
Note: you are supposed to update IDS software before using FVDI2 Quick Start

 

Terminator Software V4.6 Download Link:

https://mega.nz/#!ONol3TpY!t4z81urv8gPNEzIa4vYbK0uXrz_aFYYb2OpA7tq8DME

 

ford ids v106.01 software download free: (only tested with VCM IDS 3 )

https://mega.nz/#!LERyzJqI!KRokMKKIbEBB-sQ44aIAscN1pffUGRpoWT5L-A3f7nk

 
mazda v106 software download free: (only tested with VCM IDS 3 )

https://mega.nz/#!SBwznArD!wRrh4jDELcFVG2YISV6P-_nFKpJKgDChyqo2H-rEGmE

Write a Review
* Rating:
    Please select rating stars.
* Your First & Last Name:
* Your E-Mail Address:
* Review Detail:
*Verification Code:
      7099    No right? Get a new Verification Code
 
Share your thoughts about this item with other users. All reviews will be reviewed within two working days, aggressive reviews and spam will be blocked.
After-sales questions and issues: Contact our Customer Service Department. (A customer representative will get back to you).
Please Sign In first if you want to later edit or manage reviews uploaded by yourself.

Search

You can search Technical Service by keyword.