How to update Xprog 5.5.5 to 5.7.6 via Internet active

---

This is XPROG 5.5.5 to 5.7.6, software and firmware update internet active
 
1. Unzip the zip file, run XProgDestop.exe 
2. Press the Help -> Hardware Info and update the firmware
3. Do not press the Update Certificate
 
Says it works 100%.
 
But unluckily, i have no luck.
 
I was thinking about upgrading my xprog box so I thought I would have little to lose by following instructions given to see what happens.

Everything appears to go smoothly see pictures below.

However, you cannot read or write any chips without being locked into a certificate error loop. see pics.

Rolling back to 5.5.5 all authorisations are gone hardware registration ID is blank and unit wont read or write.



 
So for the benefit, my advice is don’t use this 
 
I finally gave it up and spent some dollars with a new one (Xprog box 5.7.6, it’s from：http://www.obdexpress.co.uk/wholesale/x-prog-box-ecu-programmer-x-prog-m.html)
 
It adds new authorization:
 
MCU/MPU->infineon{XC16x}->SAK-XC164CS-16F
MCU/MPU->FresscaleHC08-Updated->MC68HCx08AS/AZ32_CONFIG
MCU/MPU->FresscaleHC08-Updated->MC68HCx08AS/AZ32_CONFIG
MCU/MPU->Fresscale9S08->MC9S08AW8_FLASH
MCU/MPU->Fresscale9S08->MC9S08AW8_FLASH
MCU/MPU->Fresscale9S12XD->MC9S12XDx128_EFPROM
MCU/MPU->Fresscale9S12XD->MC9S12XDx128-EFPROM-secured
MCU/MPU->Fresscale9S12XF->MC9S12XF128_EEE
MCU/MPU->Fresscale9S12XF->MC9S12XF128_EEE
MCU/MPU->Fresscale9S12XHY->MC9S12XHY128_D-FLASH
MCU/MPU->FresscaleMPC55xx->MPC5515_Code-Flash
MCU/MPU->FresscaleMPC560x->MPC5602B/C_Code-Flash
MCU/MPU->FresscaleMPC560x->MPC5602B/C_Code-Flash
Immobilizers->Yamaxa->T-MAX_TYPE_I_9S12T64
Other ECU ->Chrysler-DodgeJeep->BCM-GRAND_CHEROKEE_WK_2014_Flash
Other ECU ->GM ECU->SAF-XC164CS-16F
Other ECU ->HONDA Bikes->CB650F 2015_Code_Flash
Other ECU ->Renault ClioOther ->EPS_ST10F269
Other ECU ->Renault Modus ->ECU_SAK-XC164CS-32F
Airbag(XC2xxx)->FR3T-14B321-AF(XC2336A-72)->FR3T-14B321-AFflash0
Airbag(SPC560xx)/MPC560x)->Honda_CR-V(SPC560P50LS)->Code_Flash
 
Xprog 5.7.6 has all authorization:
 
AUTH-0001 Motorola HC05 family authorization (allows to read/write EEPROM)
AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM)
AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM)
AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory)
AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM)
AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state.
AUTH-0008 BMW EWS3 authorization
AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flash memory)
AUTH-0010 MB ZGS001 authorization
AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory)
AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)
AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)
AUTH-0015 MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size)
AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0020 ARM (Micronas, ...) Family authorization (allows to read/write internal flash and external serial EEPROM)
AUTH-0021 ARM (Micronas, ...) Family bypass security authorization (allows to read/write secured and non-secured internal flash and external serial EEPROM, view/change mileage, Chassis number (VIN), serial number and PIN code).
AUTH-0023-1 MAC7xxx
AUTH-0023-2 XC23xx
AUTH-0024-1 MC9S12Cxx
AUTH-0024-2 MC9S12XE
AUTH-0024-3 9S12XE SECURITY
AUTH-0024-4 MC9S12HA/HY/P
AUTH-0025-1 MPC/SPC5xxx Authorized 11/4/2014
 
Now, it works perfect: