Part 1:How to connect OBD II vehicle
Follow the steps described below to proceed:
1. Locate vehicle’s DLC socket. The DLC is usually located 12 inches from the center of the instrument panel
(dash), under or around the driver’s side for most vehicles. If Data Link Connector is not located under
dashboard, a label should be there telling location. If the DLC cannot be found, refer to the vehicle’s
service manual for the location
2. Connect one end of the main cable to the diagnostic socket, and then connect other end to the vehicle’s
DLC (For non-16 pin DLC, you need to choose the corresponding diagnostic connector).
Part 2:How to connect non-OBD II vehicle
Choose one of the following to connect non-OBD II vehicle:
1. Via Cigarette Lighter
2. Via Battery Clamps Cable
Part 3: Download and Install X-431 HD Module App
1. Visit the LAUNCH website and download the application corresponding to X-431 HD module; Note: If downloading using the diagnostic tool please make sure Wi-Fi has good or strong signals. 2. Follow the on-screen instructions to install it. Once installation is complete, an application icon will appear on the HOME screen.
Part 4:Activate X-431 HD Module
After purchasing X-431 HD module, you have to activate it before use. Follow the steps below to proceed:
1、 Launch the application, and tap to enter;
2、 Tap “Profile” from the pull-down menu, and then tap “Connector Activation”;
3、 Input the Serial Number and Verification Code, which can be found in the included password envelope. Tap “Activate”.
Part 5:How to use Launch X431 HD on Easydiag?
Click here to learn :http://www.obdexpress.co.uk/service/how-to-use-launch-x431-hd-on-easydiag-26671.html