Shipping From UK
Home - Products - Technical Service - Real review on diagnostics & coding using VAG Pro and install on windows
« Go Back

Real review on diagnostics & coding using VAG Pro and install on windows

Matched Product
New V-A-G CAN PRO BUS+UDS+K-line S.W Version 5.5.1 better than VCDS and ODIS Free Shipping

New V-A-G CAN PRO BUS+UDS+K-line S.W Version 5.5.1 better than VCDS and ODIS Free Shipping   Item No. SP275

Latest price:€40.00 Buy It Now:€18.50 54% off    Free Shipping       Click Here to Shop
V-A-G CAN PRO full kit with VPC v5.5.1 is designed for CAN BUS + K-Line and UDS main diagnostics and programming .It can work with vehicle Volkswagen, Audi, Seat, Skoda ,made from 1990 to 2015.
VCP V-A-G CAN PRO better than VCDS and ODIS.


Real review  on diagnostics & coding using VAG Pro and install on windows


*Part 1:reviews on VAG PRO
*Part 2:How to install VAG PRO on win7 or XP
*Part 1:reviews on VAG PRO

*I’m using VAG PRO cable (VCP+K) for one year now. What I can tell about it?

  1. OCF is VERY useful, the DPF reg. always works, sometimes it lose connection or cannot finish procedure but you can always press cancel, clear DTC and reg. is done. All in all, most of OCF functions works, sometimes not but you will see on your own.
    2. mk60ec1 recoding– used 3 times, always worked, worth to buy.
    3. Flasher– yup, it’s good, pretty fast (always use battery charger)
    4. DTC and autoscan– VCDS is 10x better for that.
    5. Cable is little bit stiff, be careful with it (I broke my cable once, but they repaired interface for free), also you must plug in special USB key so be careful with it too.
    6. Updates– at least one in month, done by special program “Aktywator”, easy to use. Filemanagment- new feature also makes things simple with ZDC files.
    7. ZDC files– files made by VCP staff, used for repairing for example MMI faults. Never used by me, but my friend enjoyed it.
    8. If you are using VCDS you will notice that it looks familiar, but it’s very specific program which you will get used to it.
    9. If you have antivirus program turn it off when using VCP, it may make some trouble. But don’t worry it’s safe.
  2. My opinion: good thing in good price. It can do some things that VCDS can’t, OCF will make your life much easier, it takes time to understand how this software works, it still need some fixes, it sometimes gives you headache but it’s definitely worth to buy as second software for VAG after VCDS.** Audi A4 8E B6 owner says:

This model has a can-bus (TP1.6), but it is not connected to the diagnostic socket. The car is fully diagnosed on the K-line (VCP required interface + K). Used protocols KWP2000 and KWP1281 it.

** Audi A4 8E, B7 owner says:
This model has a CAN BUS TP2.0, but the diagnostic socket is only connected to the so-called CAN-Antrieb, i.e. Engine, transmission, airbags, ABS, Quattro drive.
In addition, a standard K-line. In other words, VCP fully supports the diagnosis B7 models, but only in the CAN-Antrieb. Other controllers are available through the K-Line and KWP2000 KWP1281 protocols.

** Mike talks about differences between VAG PRO (VCP) and VCDS:
I have both, and can say with absolute certainty that VCP does NOT replace VCDS in any way.
VAG Commander is a tool used to retrieve and modify information from the program area of the ECU.
VCDS will give full access to all control modules in the car for diagnostic purposes. It will not allow you to modify the program memory of any ECU. Having said that, VCDS does allow you to “code” a module – selecting different factory installed options. All diagnostic procedures performed by the factory tool at the dealer can be performed using the VCDS tool. In fact, the tool design is made to conform with the same terminology used on the factory tool so that factory repair information can be used with the VCDS tool.
s on your PC. VCDS only supports the functions built into the modules that were intended by the designers for diagnosing problems and effecting repair of those problems.

*Part 2:How to install VAG PRO 5.5.1 on win7 or XP

Step1. Open DVD-ROM “VCP6 (E:)”, copy “Driver VCP” to desktop.


Step2. Open “vcp6” compressed file to decompress it. Now you can right click “My Computer” to “Computer Management” and find USB devices there.


Step3. VAG PRO will show “Welcome to the Found New Hardware Wizard” (It’s for VCP), choose “Install from a list…” and click “Next”.


Step4. Untick “Search removable media” and tick “Include this location in the search”.


Step5. Next click “Browse” and “Driver VCP” then click “OK”, click “Next”. Click “Finish” to complete the wizard.


Step6. It will show “Welcome to the Found New Hardware Wizard” (It’s for USB Serial Port), choose “Install from a list…” and click “Next”. Click “Next” then “Finish”. Now you can right click “My Computer” to “Computer Management” and find USB serial converter there.


Step7. Now VAG PRO 5.5.1 is installed successfully on Windows XP. Open “vagcanpro” icon at desktop, you can see protocols, languages.


VAG PRO 5.5.1 found DTCs


VAG PRO 5.5.1 read ECU data


BTW,video guides at here:
How to install VAG  PRO V5 5 1 on Win XP
How to install VAG PRO V5 5 1 on Win 7


Write a Review
* Rating:
    Please select rating stars.
* Your First & Last Name:
* Your E-Mail Address:
* Review Detail:
*Verification Code:
      8185    No right? Get a new Verification Code
Share your thoughts about this item with other users. All reviews will be reviewed within two working days, aggressive reviews and spam will be blocked.
After-sales questions and issues: Contact our Customer Service Department. (A customer representative will get back to you).
Please Sign In first if you want to later edit or manage reviews uploaded by yourself.


You can search Technical Service by keyword.