Tips on OBDSTAR For Peugeot Citroen Mileage Correction
If you are planning to use obdstar X300 dp plus to do Peugeot Citroen mileage correction, it’s very necessary to read the following tips. IMPORTANT
Be sure to backup before correcting mileage.
1: The dashboard mileage should be corrected first ( Because the dashboard needs to through BSI to communication via OBD).
2: VERY IMPORTANT
When the screen displays “Mileage correction Succeed”, quickly unplug the dashboard or the dashboard fuse when the ignition is ON (Note: Don’t turn off the ignition and then unplug the dashboard, otherwise it will be synchronized by BSI).
3: Adjust BSI freely without plugging to the dashboard.
After both the dashboard and BSI is reset successfully, plug the dashboard or the fuse.
Done.
Good luck.
More info: OBDSTAR DP Plus done Peugeot Citroen BSI odometer correction:
