Shipping From UK
Home - Products - Technical Service - V17.03.01 wiTech MicroPod 2 technical suppport
« Go Back

V17.03.01 wiTech MicroPod 2 technical suppport

Matched Product
V17.04.27 Multi-language wiTech MicroPod 2 Diagnostic Programming Tool for Chrysle Dodge Jeep and Fiat with Software

V17.04.27 Multi-language wiTech MicroPod 2 Diagnostic Programming Tool for Chrysle Dodge Jeep and Fiat with Software   Item No. SP271-C1

Latest price:€200.00 Buy It Now:€178.00 11% off       Click Here to Shop
V17.04.27 Multi-language wiTech MicroPod 2 diagnostic and programming interface for Chrysler fits in your shirt pocket and provides 100% CAN coverage for Chrysler, Dodge, Jeep and Fiat.

Description

Part 1: v17.04.27 wiTECH download link:
Part 2: How to install wiTECH MicroPod 2 v17.04.27 software crack:
Part 3: How to use MicroPOD II clone for auto key programming

Chrysler, Jeep, Dodge diagnostic VCI interface wiTECH MicroPod 2 software updated!! here, free download wiTECH software v17.04.27 and get the how-to’s of wiTECH 2 app installation to install Chrysler wiTECH software yourself! Also, a wiTECH MicroPod 2 v17.04.27 user manual of key programming is attach here for you.

 

Part 1: v17.04.27 wiTECH download link:

https://mega.nz/#!Nm5QRQYR!fVPAE7SNtYa2iE5eqQaZ1zyW7A1nh94-vPGpK1Iu3lg

 

It’s wiTECH software crack

No need password for wiTECH MicroPod 2 login

No need wiTECH software license

 

Tested OK by professionals @OBDexpress

Safe to use with wiTECH MicroPod 2 clone (item no. SP271-C only)

 

Operation system of wiTECH 2 download:

Windows XP;

Windows 7

 

THE MOST IMPORTANT NOTES:

  1. The date of the computer must be the same as the fact
  2. The computer must not be connected to the Internet
  3. Connect the machine to the MicroPod 2 to open the wiTECH software
  4. The system may ask you to turn off the software and turn it on for registration again. Repeat it for several times. Then you can use it normally

 

 

Part 2: How to install wiTECH MicroPod 2 v17.04.27 software crack:

 

Step 1   install AdobeAIRInstaller.exe

Step 2   install jre-6u45-windows-i586.exe

Step 3   install wiTECH_Install_17.04.27.exe

Step 4   Restart the computer

wiTECH diagnostic tool is ready for use!

 

 

Part 3: How to use wiTech MicroPod II clone for auto key programming

 

Step 1

Plug the MicroPOD II device into the OBD port and connect the USB cable from the device to your laptop. This wakes the BUS on the car.

witech-micropod-2-v17-1

Step 2

Manually enter the VIN of the vehicle. This gives you access to the module list.  Select the RFH (Radio Frequency Hub) module. This is the module where the key is registered.

witech-micropod-2-v17-2

Step 3

Next select “Miscellaneous Functions,” then “Program Ignition Fobix.”  At this point, you are prompted to enter the VIN again, followed by the four-digit PIN Code.

witech-micropod-2-v17-04

Step 4

After the four-digit pin is entered you are prompted to hit continue to “Program Ignition FOBIK.” Once you hit continue you must press the UNLOCK button on the FOBIX within 30 seconds (the FOBIX needs to be located near the center console during this procedure).

witech-micropod-2-v17

Step 5

Programming of the Ignition FOBIX is now successful. The new key key is accepted into the car, and the ignition will now turn on and start the car. At this point, you also have the option to program a second key.

 

Part 3: How to use MicroPOD II clone for auto key programming

 

Step 1

Plug the MicroPOD II device into the OBD port and connect the USB cable from the device to your laptop. This wakes the BUS on the car.

 

Step 2

Manually enter the VIN of the vehicle. This gives you access to the module list.  Select the RFH (Radio Frequency Hub) module. This is the module where the key is registered.

micropod-ii-key-programming-1

Step 3

Next select “Miscellaneous Functions,” then “Program Ignition Fobix.”  At this point, you are prompted to enter the VIN again, followed by the four-digit PIN Code.

micropod-ii-key-programming-2

Step 4

After the four-digit pin is entered you are prompted to hit continue to “Program Ignition FOBIK.” Once you hit continue you must press the UNLOCK button on the FOBIX within 30 seconds (the FOBIX needs to be located near the center console during this procedure).

micropod-ii-key-programming-3

Step 5

Programming of the Ignition FOBIX is now successful. The new key key is accepted into the car, and the ignition will now turn on and start the car. At this point, you also have the option to program a second key.

micropod-ii-key-programming-4

Things to Remember:

  • You must be online to program the key.
  • The PIN Code is only good for one session, which lasts 72 hours. After 72 hours the pin code expires.
  • If you input the wrong code for three-time it locks the BCM and you cannot service the vehicle for 24 hours.
  • The key is one-time programmable. Once married to the vehicle it is locked to the car forever. The key can be erased from the car and put back into the same car, but can’t be switched to another car.
  • The placement of the key during initialization is important. It needs to be placed either behind the shifter or in the center console.
Write a Review
* Rating:
    Please select rating stars.
* Your First & Last Name:
* Your E-Mail Address:
* Review Detail:
*Verification Code:
      0236    No right? Get a new Verification Code
 
Share your thoughts about this item with other users. All reviews will be reviewed within two working days, aggressive reviews and spam will be blocked.
After-sales questions and issues: Contact our Customer Service Department. (A customer representative will get back to you).
Please Sign In first if you want to later edit or manage reviews uploaded by yourself.

Search

You can search Technical Service by keyword.