Part 1.VXDIAG oem C6 Doip software registration and firmware update guide.
12019.12 Xentry and DAS do not need to be activated, use directly.
2Use one USB cable to connect VXDIAG OEM C6 and the computer to run DTS Monaco super engineering software (dts is activated with usb).
3epc, wis software activation steps:
Login account: admin, password: 12345
Note: after opening epc-wis browsed, if you can see lan-id is unknown, the reason is the computer wasn't installed with NIC driver or you need to uninstall and reinstall the NIC driver.
Driver installation:
1Open VX Manager (open www.vxdiag.net, scroll down to download the newest version) 2Click on "Diagnostic", then "Benz" icon. If "Install" option light up, click on it; if it is gray, driver is installed successfully (Note: the computer needs to be connected the network, OEM C6 needs to be connected to the car and one computer).
Part 2.VXDIAG Benz C6 "Initialization of diagnosis multiplexer failed" solution
Car model Benz Sprinters year 2011 / 2010 / 2012, using VXDIAG Benz C6 to diagnose and have fault (1-1)-1.501 9988: Initialization of diagnosis multiplexer failed.
Possible causes:
The link between the diagnosis multiplexer and the diagnostic socket is interrupted.
The link between the diagnosis multiplexer and the diagnostic unit is interrupted.
The voltage supply at the diagnostic socket (circuit 30 and (or) circuit 31) is faulty.
Note:
When using SDconnect, check the connection status using the Toolkit.