WIFI ICOM A2 B C for BMW diagnostic programming tool technical support


Part 1: What should you pay attention when use USB WIFI for WIFI BMW ICOM
Part 2:Related technical support article
What should you pay attention when use USB WIFI for WIFI BMW ICOM:

1)  Insert USB WIFI to your PC USB port first
WIFI BMW ICOM A2 B C diagnose programming tool

2) Turn off the computer WIFI and other added WIFI. Your PC only can use our USB WIFI. Wired Ethernet port of your PC cannot connect internet and LAN cable for ICOM.

3) Make sure all above you have done, then start your PC.

4) After your PC is started. then make sure internet are all turned off or do not connect any LAN cable

WIFI BMW ICOM A2 B C diagnose programming tool

Attention: this DWA-131 is our USB WIFI. You CANNOT turn off it. It is normal to show X.

5) Start the ICOM software, tick "wifi for ICOM"

WIFI BMW ICOM A2 B C diagnose programming tool

6) After done. Now connect your ICOM firmware with your car. Wait for 20-60 second, then you will see the light on the ICOM main unit will flash slowly or do not flash. Then it means USB WIFI and ICOM A2 WIFI are matched ok and have communication.

WIFI BMW ICOM A2 B C diagnose programming tool

7) Now you can use diagnose and programming software. Click OK if you meet the following prompt.

WIFI BMW ICOM A2 B C diagnose programming tool

8) This interface cannot be closed. Only can be minimized.

WIFI BMW ICOM A2 B C diagnose programming tool

9) Software can recognize firmware normally.

WIFI BMW ICOM diagnose programming tool scanner


2.Related technical support article

Click to learn:
How to build a Power Supply for BMW ICOM

2) How to use NCS Expert coding factory setting for bmw ECU