Package offer for BMW INPA K+CAN Interface Diagnostic tool Plus BMW 20pin to obd2 16 Pin Connector
BMW INPA K+CAN Interface Diagnostic tool Plus BMW 20pin to obd2 16Pin Connector
Interface USB OBD2 for BMW - INPA/Ediabas - K+DCAN allows full diagnostic of BMW from 1998 to 2008 (all function as in OMNITEC interface). Build in 2 lines K and D-Can magistral
1.read and delete errors
1)Fast magistral D-CAN and PT-CAN (500 kbit/s)
2)Slow magistral K-CAN (100 kbit/s)
3)Standard BMW protocol (BMW OBD interface).
1)E60, E61 od 03/2007
2)E83 od 09/2006
3)E81, E87 od 03/2007
4)E90, E91, E92, E93 od 03/2007
5)E70 (new model X5)
6)R56 (new model MINI)
PT-CAN,K-CAN-fully switchable speed of magistral CAN - ou can diagnose driver without any car
3.Protocol "BMW OBD interface" for older cars:
1)from 1995 to 1998 (don't need K-line).
2)from 1998 to 03/2008 (all models)
1* K+CAN CABLE
1* BMW 20 pin to 16 pin cable
For MOST non-free shipping goods, default shipping method is DHL. Need 3-7 working days on the way after dispatch the goods.YANWEN Express:
7-14 working days on the way, no need to pay tax for most european counties.EMS:
6-10 working days on the way. To Russian only send by EMS. For some remote area, if you do not want to pay remote fee, we can send it to you by EMS too.Aramex:
5-10 working day. To most middle east counries. If you do not like this shipping method, please leave message on your order.Flat airmail:
7-18 working days on the way. For remote area or holiday, need more time.Attention:
If you needs YANWEN express shipping or other shipping method like UPS, TNT, FedEx and so on, or you have special needs for your order, such as declared name and so on, please leave message on the order to notify us
. Otherwise we will send the order as our usual practice.
As different country has different import policy, sometimes we will change the shipping method based on the counties and goods.
When you get the parcel, before sign for acceptance, please check the package to make sure the product is correct and no damage. For any question, please contact us at:Online Customer Service
Car model and year: BMW 320d e46
Car issue and my purpose:
I want to diagnose my BMW problem, I have ASC/ABS and Brake pads light on ... I checked and one sensor from brake pads was broken, I think a ABS sensor is down and I don´t know which one.
BMW diagnostic cable I have:
I bought a K+D Can cable for 25 Euro.
Problem I came cross:
I can´t install the driver... Inpa and Ediabas work Fine ... I installed win xp and didn´t work so I changed the HDD whit windows 7 x64 to give a try... But same problem.
I tryed to install CDM v2.12.00 WHQL Certified.exe , run it as administrator, run it in win xp sp3 but nothing.
Right click on the USB/UART device and go to properties, then the details tab, and look at the hardware ID. And this is what's there
Finally, I fixed by following method:
I go to the downloaded driver files, and into the ftdibus.inf and ftdiport.inf files.
Scroll down and I see a list of the VID and PID data, I edit the PID stuff to read 0000 like my lead, and then reinstall it, so find every instance of "PID_6001" and change it to "PID_0000" which should mean that the driver will recognize and accept the lead to work with.
I would probably go for the older 2.10 drivers:
http://www.obd2vip.com/html/bmw-inpa-k-can-219.html change the extension
from .pdf to .rar and try those, that's the 2.10 driver set, with the info files set to recognize the product ID as PID_0000