MAGPro2 is a chiptuning system composed of several modules. Serial OBDII programming tool that allows the communication with a vast number of vehicles, allowing the reading and writing through the use of simple connections with simple and fast software.
KESS OBD Tuning Kit for read EEPROM and flash from ECU by OBD for car chip tuning. It can support EDC 15, EDC16 and other ECU.
SmartPRO 5000U-PLUS programmer is High-speed FPGA driven hardware for ultra-fast programming, designed for versatile multi-applications, You have freedom to choose the optimum mode for your programming demands.
D80D0WQ 160D0WQ EEPROM Fast Eraser,power on and put on the IC card,erasing will done without ten seconds.
SMPS MPPS V13.02 Tuning Remap Chip tuning CAN Flasher is a USB chip tuning interface. This is good clone working with V13.02 version of software. This interface lets you to read and write memory of a car computer through the diagnostic connector.
MPPS V21 MAIN + TRICORE + MULTIBOOT with Breakout Tricore Cable
1.Latest Software version: V21
2.Package comes with Breakout Tricore cable.
3.Warranty: one year
Upa-usb 2013 is the full set with all adapters,The main Device can be directly connected to the Elrasoft.com UUSP (UPA-USB Serial Programmer) or by an optional DB9 male / female 1:1 extension cable. It's equipped with an 40pin ZIF Socket for all narrow and wide DIP / DIL devices as well as with a 16 pin SOIC ZIF (150mil, narrow) socket to cover most commonly used devices.
CAS4 CAR PROG for BMW is a universal EEPROM tool that allows reading, writing, editing and erasing various types of EEPROM memories. I2C, SPI and Microware memory interfaces are supported. Device is communicating with PC through USB port.
Original Wellon GP-1 supports PC connection and standalone mode to program ECU. Functions includes PIC microcontrollers, EEPROMs, dsPIC, AVR and other microcontrollers like AT89, plus PLDs and flash memory. Hi-speed data transfer.
1. Software Version: V2.37 ; Firmware Version: V4.036
2. Support much more ecu types than old versions.
3. Unlimited token.
4. Plastic shell,More lightly!
The LabTool-48UXP lets you select the verify voltage after you have programmed the device. The Vcc voltage can be 2.0V to 6.5V. This feature ensures that your device has been programmed properly, preventing failures due to programming errors and ensuring data retention.
XPROG-M V5.60 XPROG M Programmer with USB Dongle
No operation system limitation, software can be in stalled on Windows XP, windows 7
This is the only version XPROG-M can decrypt new version BMW CAS4.
Add new authorization: AUTH-0025 Authorized 11/4/2014
As the updated Version of VP-890, VP-896 with multi-language is a reliable, high speed, high performance and low cost advanced universal programmer. It is a perfect over-current protection circuit, short-circuit will not damage the chip programmer.
Automobile ECU Sensor Simulation Tool can support the function of Diagnosis/engine/transmission/ABS/air-conditin/ Immo etc. As a multi-brands tool, it can support most car models of Asia, Europe and USA.
UPA USB Serial Programmer was used to do Motorola chip programming. Similar product with UPA USB programmer is XPROG-M programmer.
SMPS MPPS V13.02 ECU Chip Tuning Tool for EDC15 EDC16 EDC17 is a USB chip tuning interface. SMPS MPPS V13.02 is good clone working with V13.02 version of software.SMPS MPPS V13.02 interface supports read and write memory of a car computer through the diagnostic connector.
UPA USB Serial Programmer Single Version Main Unit With One Adapter include the main unit and one adapter. Can read HC08 HC05 EEPROM and so on.