CGDI Prog MB Benz Key Programmer Support All Key Lost with ELV Repair Adapter
CGDI Prog MB Benz Car Key Programmer
1. Supports fastest add Benz Car keys:
Top 5 Reasons to get CGDI Prog MB Key Programmer:
collection time 1'50s, password calculation time 40s, 99% get password for one time calculator, it is the fastest key programming tool to calculate the password at present.
2. Supports MB all key lost,
including 211,209,204,207,212,166,246,197,172,164 +, 216 etc,special for European old models(W210, W203, W639, W220, W215, W169,W211) via obd directly, run faster, much cheaper
3. CGDI Prog MB can calculate the password online.
4. Free Update Online on official website http://www.cgprogcar.com/?langid=en
, when you receive the device, please download software on official website too.
5. CGDI Prog MB can work with both Bekey or orginal keys such as SA1252, SA1252-B, SA1253, SA1253-B
Kindly notice: DON'T take apart the CGDI main unit.
CGDI Prog MB host is equipped with an encrypted battery.
If you disassemble the unit, the encrypted battery will power off automatically. BenzMonster software refuses to run properly.
What is the token policy for CGDI Prog MB?
Plan A: Two free tokens each day valid for 180 days.
When license gets expired, please pay to Token Service 180 Days for CGDI Prog MB Key Programmer,60USD/180days.
After you pay for it, can calculate online two times free each day again.
Plan B: One free token each day all the time.
It won't get expired anymore. And if you want more tokens, one token will cost 4usd. Please pay for
One Token for CGDI Prog MB. You can calcualte 4 times at most each day. Besides if you have CG100 PROG III Airbag Restore Devices and CGDI Prog BMW MSV80,
pls pass us serial number to bundle them together, one device serial number can have one more token free each day.
(Notice:Plan B can be changed to Plan A,but Plan A can not be changed to Plan B)
How to activate CGDI Prog MB?
CGDI Prog MB needs activation when you receive it. Please follow the steps as below:
1. Download Benz Monster software, there will be user manual too in the software catalogue
2. Install software on your laptop and read out serial number of your CGDI
3. Pass serial number to our customer service, when activation is done, please restart CGDI Prog Benz and the Benz Monster software, it will be ready to use.
CG-MB BenzMonster V22.214.171.124
1. Added K-line all lost collection support EIS Model
2. Optimize the Keyless repeatedly plug collecting process
Fix problems that can cause program errors in specific situations in the collection.
3. Optimize network connectivity and improve server connectivity stability.
4. Software display language increases regional restrictions.
Devices sold in the China region can only use Simplified Chinese.
CG-MB BenzMonster V126.96.36.199 NEW (28/10/2018)
1. Added online store function
Now, you can self-renew your password calculation service or recharge points in the store.
Currently only WeChat payment is supported.
2. Added the automatic activation function
When you first purchase a device, you can choose the subscription service version to activate the device.
Please note that the subscription version cannot be changed after activation.
3. Remove the limit on the number of password calculations per day
You can calculate the password as much as possible within a day.
Of course, the premise is that you have more than enough points.
4. We greatly optimized the stability of the server
We are deeply sorry for the impact of the previous period of downtime maintenance, and we thank our customers for their support.
CG-MB Benz Monster V188.8.131.52 (20/09/2018)
1. Fixed the problem that read EIS failed when 209/211 collection with key.
2. Fixed the problom that 209 sync ELV and 169 write ELV display is not clear.
3. Fixed the problom that the K-line EIS is enabled successfully, but the display fails.
CG-MB BenzMonster V184.108.40.206 (08/09/2018)
1.Added function: read FBS4 gearbox basic information
2.Fixed the problom that partial device upload data validation failed
CG-MB Benz Monster V220.127.116.11 NEW(06/08/2018)
CGDI MB Mercedes Benz Key Programmer V2.6.0 Update Info(02/06/2018):
1. Add 169 ELV erase and write function;
2. Add check EIS status function;
1. Add ELV emulator function: support one-click unlock / read & write data / read password.
2. Add ELV password writing directly without erasing EIS and synchronize.
3. Add OBD mileage reset function for the following cluster types:
C(W204) / GLK(X204) / CLK (207) / E(W212) / SLS (197) / CLS (W218), R-Class (W251) / GL(X164) /ML(W164), E-Class (w211) /CLS(W219), S-Class (W221) /CL(216), C-Class (W203) / CLK(W209), SLK(R171).
4. Add the gateway EE /Flash OBD reading and writing for the following gateway types:
C_Class_W204, E_class_W211, E_class_w212, CLK_X204, CLK_W207, SLS_W197, CLS_W218, M-Class_W164, R_class_W251, Slk_R171, GL_X164, S_class_W221, CL_W216.
5. Add the non-HC05 EIS format file and the original data type save function, so that you can complete modifying the Mercedes EIS data by clicking one button.
6. Fix the problem that a partial BE keys fail to read after writing.
7. Add a button to clear the fault code.
8. Fix the problem that a partial changing gear can't be erased.
9. Fixed the problem that some EIS data loading error;
10. Add consumption points to calculate key password mode.
Consumption points do not have the device expiration limit, when the device expires, it can still be calculated with consumption points. Points will be in the company launched a variety of activities to be obtained, everyone stay tuned!
CGDI Prog MB Key Programmer Description:
Able to add keys on Mercedes Benz and program a new key when all keys are lost.
Add new Mercedes Benz keys: Data acquisition for 1 minute 50 seconds, pin code for 40 seconds and 99% success.
Program a new key to the following models when all keys are lost: 211, 209,204, 207, 212, 166,246,197,172,164+, 216 etc.
2. Workable Benz Car Model:
Mercedes-Benz A series (2004 -)
Mercedes-Benz B series (2005-)
Mercedes-Benz C Series (2001 - , including 210)
Mercedes-Benz E Series (2001-, including 203)
Mercedes-Benz CL series (2001-)
Mercedes-Benz GLK (2004-)
Mercedes-Benz ML series (2003 -)
Mercedes-Benz R series (2003 -)
Mercedes-Benz G series (2003 -)
Mercedes-Benz S Series (2001 -, including 220)
Mercedes-Benz SLK (2003- )
Mercedes-Benz SLS (2004 -)
Mercedes-Benz Vito (2003-)
Mercedes-Benz Sprinter (2003 -)
Mercedes-Benz Vito (2003 -)
3. EIS/EZS Function:
1). Can read EIS data via OBD, no need to distinguish the EIS/EZS model.
2). Can display the key status and directly disable the key position.
3). Can display EIS Number, can distinguish the Benz model
4). Can display EIS status.
5). Automatically identify EIS model.
6). Automatically identify CAN protocol
4. Programming Key Features:
1). Automatically identify the basic key information (including how many times you used SSID)
2). Can directly read pin code of BE keys via infrared, can erase BE keys.
3). NEC adapter can write the original Benz smart key and common key.
4). Can write the Benz original key via infrared.
5). Can restore the data of key and EIS with the key password.
5. Generate the Key Data:
1) Can generate the key data of HC05/908/912/9S12/NEC EIS/EZS
2) Time: 26 seconds
3) Format: 11/ 41/51 (41 format is smart key data)
6. Infrared Key Function:
1) Can directly read key pin code via infrared on parts of 209/211/220/215 EIS.
2)Can read/write EIS via infrared.
How to use CGDI MB add Mercedes Benz New Key?
Step 1: Click on "Lock (EIS)
Step 2: Click on "Read EIS data"
Step 3: Click on "Calculate Password", then "Copy key with key"
Step 4: Click on "Other Keys" (One generation of key 705E6 key), then "OK".
Step 5: Please insert the key into EIS and click OK.
Step 6: Please insert the key into the device and click on OK!
Step 7: Collecting the data, do not remove the key.
Step 8: Please insert the key into EIS and click OK.
Step 9: Please wait for 7 seconds.
Step 10: Please pull out the key from the EIS, and then click OK!
Step 11: Please insert the key into the EIS again and click OK!
Step 12: Unplug the key for 5 seconds, then insert the EIS, then click OK!
Step 13: Save the generated files.
Step 14: Please insert the key into the device again and click OK
Step 15: Please save the data in new name.
Step 16: Click on "Upload Data"
Step 17: Click on "Open"
Step 18: Upload data successfully, please click the "Query Results" button to query.
Step 19: Click on "Query result"
Step 20: Display Query time.
The Complete Steps with pictures please check here:http://www.obdexpress.co.uk/upload/pro/cgdi-mb-car-keys-add-user-manual.pdf
1set CGDI Prog MB Benz Car Key Programmer
Autel MaxiIM IM608
AUTEL MaxiSys Elite with J2534 ECU Preprogramming
Shipping and delivery Attention:
For MOST non-free shipping goods, default shipping method is DHL. Need 3-7 working days on the way after dispatch the goods.YANWEN Express:
7-14 working days on the way, no need to pay tax for most european counties.EMS:
6-10 working days on the way. To Russian only send by EMS. For some remote area, if you do not want to pay remote fee, we can send it to you by EMS too.Aramex:
5-10 working day. To most middle east counries. If you do not like this shipping method, please leave message on your order.Flat airmail:
7-18 working days on the way. For remote area or holiday, need more time.Attention:
If you needs YANWEN express shipping or other shipping method like UPS, TNT, FedEx and so on, or you have special needs for your order, such as declared name and so on, please leave message on the order to notify us
. Otherwise we will send the order as our usual practice.
As different country has different import policy, sometimes we will change the shipping method based on the counties and goods.
When you get the parcel, before sign for acceptance, please check the package to make sure the product is correct and no damage. For any question, please contact us at:Online Customer Service