Digiprog3 is a cost-effective mileage correction tool, which supports multi-language and full range or vehicle. V4.94 digiprog 3 is latest version of Digiprog3, add more car models on the basic of V4.93.
Cheap V4.94 Digiprog III Digiprog3 Odometer Master Programmer Entire Kit
This is newest version Digiprog3 with most competitive price.
What is the difference between digiprog 3 SM47-D and SM47-E?
1) They have the same serial number, but SM47-D digiprog 3 can be directly updated by Email. While SM47-E cannot. SM47-E is the update version for SM33-C.
2) They have the same cables. Including Board adapter and cable for ST01 and ST04, BMW CAS cable and so on.
V4.94 Add Model List:
-A3 new version
-W176 new version
-W204 new version Diag
-W212 new version Diag
-Insignia new version
-Astra new version
V4.94 Add Model List:
For Audi :
A3 Diag new version
A6 Diag new version
A8 Diag new version
For Mercedes :
R 172 Diag new version
R 231 Diag new version
W 212 Diag new version
For Ford :
For VW :
Amarok Polo Johnson
V4.94 Digiprog3 Odometer Master Programmer Feature:
1. Power-On Password:1
2. Newest Version: V4.94
3. Supported Languages: Deutsch, English, Espanol, French, Portuguese, Italiano, Turkish, Nederlands.
4. Worldwide leader in digital speedo programming and correction software.
5. Quality standards are second to none.
6. Years of experience in digital vehicle engineering.
7. Professional technical service.
Digiprog 3 V4.94 Other Features:
Service Interval Adjustments and Settings
Fault memory read-erase
Integrated PC communication
Some Important Tips for Using Digiprog 3:
1. Always connect the Eeprom to the ST01 or ST04 before you connect to the DigiProg this will avoid Electro static feedback (ESD).
2. Never solder the connections whilst the lead is connected to the programmer, this will damage the DigiProg.
3. Always keep your DigiProg in its case when not in Use & keep it in a dry environment at night (don’t leave it in the trunk of your car) If you are using solvents to remove lacquers from eeprom ensure they are cleaned
4. completely as the solvent can damage the clips.
Digiprog 3 Menu:
1. EEPROM Menu
The first option on the main menu is the Eeprom menu. Reading, writing and saving eeprom information is all done using this menu. A more detailed guide to using this menu follows later on in the introduction.
2. CAR/TRUCK Menu
This is the menu you will use for correcting and reprogramming vehicles. Manufacturers are set out in alphabetical order and models of vehicles are set out in a simple sub-menu format.
3. Motorcycle Menu
This menu is the same as the CAR/TRUCK menu but is used for reprogramming motorcycles.
4. Special Functions Menu
The special functions menu is for use only by official DigiProg dealers.
5. Setup Menu
This menu is where settings on your DigiProg can be changed. Language, password, brightness, volume, and the time/date can all be set and changed in this menu. You can also change whether your machine is working in kilometres or miles.
Using the EEPROM Menu:
On some of the vehicles you will come across, an eight pin Eeprom chip will be used to store the vehicle data. These chips hold vital information from the vehicle such as ignition and immobiliser codes. Loss of this information could result in anything from minor faults, to major faults involving the vehicle not starting and having to be taken to the main dealer. This is why it is very important to read and save the original information from the Eeprom before programming, this way if any errors do occur you can always return to the point you started. The process of reading and saving this information is very simple. The Eeprom chip itself will have a mask number printed across the top of it, for example a widely used chip is a 93C46. You can connect the chip to your DigiProg by using adaptor ST01 or ST04. Most chips are surface mount eeproms which will use ST01, but the larger DIL chips will use ST04.
Digiprog III V4.94 Screen Display:
1pc x Digiprog3 Main Unit
1pc x OBD2 Cable
1set x Cables and Adapters
Autel MaxiIM IM608
AUTEL MaxiSys Elite with J2534 ECU Preprogramming
Shipping and delivery Attention:
For MOST non-free shipping goods, default shipping method is DHL. Need 3-7 working days on the way after dispatch the goods.YANWEN Express:
7-14 working days on the way, no need to pay tax for most european counties.EMS:
6-10 working days on the way. To Russian only send by EMS. For some remote area, if you do not want to pay remote fee, we can send it to you by EMS too.Aramex:
5-10 working day. To most middle east counries. If you do not like this shipping method, please leave message on your order.Flat airmail:
7-18 working days on the way. For remote area or holiday, need more time.Attention:
If you needs YANWEN express shipping or other shipping method like UPS, TNT, FedEx and so on, or you have special needs for your order, such as declared name and so on, please leave message on the order to notify us
. Otherwise we will send the order as our usual practice.
As different country has different import policy, sometimes we will change the shipping method based on the counties and goods.
When you get the parcel, before sign for acceptance, please check the package to make sure the product is correct and no damage. For any question, please contact us at:Online Customer Service
How to repair Digiprog 3 update failure- a blue screen
This is an ideal solution to fix Digiprog 3 (blue screen) after a upgrade failure. It has been tested ok by many users, especially the old Digiprog 3 owners updating 4.94 software themselves.
you may be at risk to try this if not experienced enough.
1. Reasons of a blue screen.
a) inappropriate update for Digiprog 3. (the most common cause)
We must remember that updates are created for the serial number. The serial number of the update files must be Digiprog 3 serial number. Otherwise, upload the files to another serial number gives us the effect shown in the picture above.
b)interrupted during the upgrade of communication between PC and the digiprog III device.
c)Other causes: unrelated to update the device
2. How to fix the DIGIPROG 3 mux after a failed update.
To repair the unit, you need:
a) Update files with the corresponding serial number = serial number of the device.
b) Programmer serial memory for example, willem.
Ok, so we begin. We will have 3 digiprog undress and get into the PCB, exactly 2 serial memory.
You will see a such a view:
Us interested, memory, marked in the picture above. Are respectively a memory U1A and U2A. These are the memories that are 22, feet on one side, which is 44, feet the entire memory. We remove the memory U1A from the plate and put in the programmer.
Load a file content digi1.bin, to memory U1A.
Then again put memory on the board.
Do the same with memory U2A. Only here to load file Digi2.bin
Then again put memory U2A on the board.
Preferably before each update, do yourself a copy memory dumps U1A and U2A. Then we can go back in case of problems with the update to the old version.
Twirl, back digiprog. After this step, run digiprog. If everything went well that you will be greeted this image
Digiprog3 Citroen c5 x7 2011 93c76 odometer correction method