PP2000/Lexia-3 Interface works with both Citroen and Peugeot. It is compatible with most of Citroen and Peugeot cars from 1995. But not good for Citroen C5.It support read identification, read fault codes, clear fault codes, auto-scan etc. Multiple language available.
Lexia-3 lexia3 V48 PP2000 V25 for Peugeot and Citroen Support 307/C5 with Diagbox V7.83 Software
This one is the flat airmail free shipping for SP08-C lexia 3 PP2000
PP2000: V25 (This one should be installed on XP system)
Diagbox: V7.83 (This software can be installed on MOST
XP and WIN7)
Attention: Install PP2000 Lexia software and Diagbox Software on different PC. They cannot be installed on the same PC.
Top reasons to choose Lexia 3:
1) Multi-langauge: English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech
Lexia-3 PCB edge is golden with original full chips.Double PCB has 7pcs optocouplers, which are 100% original and new.
3) lexia-3 relays are 12pcs, which are 4.5V, it is more stable.
4) PP2000 have 2pcs Optocouplers.
5) Now this lexia 3 can work with Peugeot 307 models
What is the difference for SP08-C leixa 3 and SP08-D lexia 3?
1) SP08-C lexia 3 is made by original chip. it is more stable
2) SP08-C lexia 3 support Peugeot 307 models
3) SP08-D lexia 3 has one more cable than SP08-C lexia 3.
1.It is compatible with Citroen cars including: C1,C2,C3,C4,C6,C8,C-CROSSER,NEMO,BERLINGO,JUMPY,JUMPER,AX,SAXO,BX and so on. But please pay attention, according to our customer's experience, this item can not works good at C5 new models.
2.It is compatible with most Peugeot cars after 1995.
3.Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).
Unlike other universal car scanner tools which only read fault codes; this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...
2. Read fault codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.
3. Clear fault codes
this function clears all stored fault codes and other diagnostic information.
4. Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
5. Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
6. Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)
1.Hardware and software requirements
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.
If customer requires, we can prepare ready to work PC.
Customer Frequently Asked Questions:
Q: Can i install the software on the laptop with Windows 7 operating system?
A: PP2000/Lexia-3 can be installed in the laptop with Window XP operating system.
Q: This product can be used to diagnose Citroen C5?
A: Dear friend, sorry to tell you that this one is not good at Citroen C5. If you want to diagnose this one, our autocom 3 in 1 and FR704 are good choice.
Q: When i install the Diagbox software, it asks the dealer code for me. What is that, can you explain it for me?
A: Your operation is wrong. This software does not need dealer code. There are 3 videos in the CD. Please follow the video to install the software. Do the same step.
1pc x Main unit with extension OBD2 cable
1pc x Long 9pin to USB cable
1pc x Short 9pin to USB cable
1pc x OBD2 cable
1pc x Instruction for Installation and Activation DVD for PP2000
Main board photo shown:
Autel MaxiIM IM608
AUTEL MaxiSys Elite with J2534 ECU Preprogramming
Shipping and delivery Attention:
For MOST non-free shipping goods, default shipping method is DHL. Need 3-7 working days on the way after dispatch the goods.YANWEN Express:
7-14 working days on the way, no need to pay tax for most european counties.EMS:
6-10 working days on the way. To Russian only send by EMS. For some remote area, if you do not want to pay remote fee, we can send it to you by EMS too.Aramex:
5-10 working day. To most middle east counries. If you do not like this shipping method, please leave message on your order.Flat airmail:
7-18 working days on the way. For remote area or holiday, need more time.Attention:
If you needs YANWEN express shipping or other shipping method like UPS, TNT, FedEx and so on, or you have special needs for your order, such as declared name and so on, please leave message on the order to notify us
. Otherwise we will send the order as our usual practice.
As different country has different import policy, sometimes we will change the shipping method based on the counties and goods.
When you get the parcel, before sign for acceptance, please check the package to make sure the product is correct and no damage. For any question, please contact us at:Online Customer Service