As OEM diagnostic tool for Ford, VCM II provides full dealer diagnostic capabilities for most 16 pin Fords, including Ford vehicles from old to latest. Read/Clear DTCs, program ECUs, keys, PCM, ABS, Instrument Cluster, Air Bag, Injector Coding and so on. More function are added.
This tool is the same as SP177-C/SP177-C1, same function.
1.It achieves X431 series full car model and full-system diagnose function.
2.It communicates with your car by connecting DBSCAR with Bluetooth.
3.It integrates more application and service.
4.Launch X431 V 8'' Lenovo Tablet PC can replace X-431 V WiFi/Bluetooth and with 2 years free update on the official site.
5.It does not need to activate and can work directly
OBDSTAR X300 DP Plus PAD2 C Package Full Version:
Immobilizer+Mileage correction+Diagnosis+Special function ( Oil reset + ABS+Battery matching+ ECU programming+ EPB+ Throttle programming+ Airbag reset+ TPMS+ Steering angle rest+ OBDII+ DPF+ Injector code+ Suspension matching+ Gear learning+ CVT learning+ EEPROM+ Key renewing+ ECU cloning) Adapter( P001 programmer+ C001 circuit board+ C002 circuit board+ W001 data cable+ W002 data cable+ W003 data cable+ Toyota smart key Emulator) + others( Ignition coil+ Remote tester )
Buy now, Free Get Renault Converter/ FCA 12+8 ADAPTER !
1. Online Version Kess V2 Firmware V5.017 support online service, newly add 140+ protocols,no tokens Limitation, program safer and more stable!
2. Newest software: Ksuite V2.53;Latest Firmware: V5.017
3. Red PCB
4. Get ECM TITANIUM V1.61 with 18475 DRIVER for free, sent online
Newest K-Suite V2.53 Software ,Newly Add 7400+ Vehicles
1) 2 in 1 scanner. One scanner support both Ford and Mazda vehicles.
2) Latest IDS support more newer Ford and Mazda vehicles.
3) Multi-language to choose.
MPPS SMPS V18 MAIN + TRICORE + MULTIBOOT with Breakout Tricore Cable
Warranty: one year
Package comes with Breakout Tricore cable.
Volvo 88890300 Vocom Interface for Volvo/Renault/UD/Mack Truck Diagnose is a tool that supports the repair and diagnostic process. It was developed to make repair shop tasks easier and more efficient. It can be used in the repair shop, out in the field, at the roadside, or during test drives.
1) version of SDP3 (V2.40.1 and V2.31 ) ,with one time activate for free.
2) Support full maintenance for all Scania trucks, buses, other heavy vehicles or heavy duty engines made by Scania
3) SDP3 has better performance than Scania VCI2
This is package offer for MB SD C5 with latest software and DELL D630 laptop which has 4GB RAM, Software is preinstalled and preactivated before shipping.This package offer software is SSD, running speed faster.Support Multi-language
OBDSTAR ODOMASTER is a new Android based 5'inch tablet,specialized for cluster calibration and oil service reset.
The device inherits the latest cluster calibration technology from OBDSTAR with various advantages of easy-to-use,wide model coverage,fast operation and durable features which can meet the actual needs of different users such as automobile repair plants and fast repair shops.
1.No matter what car model and which car year, KTM Bench can read and write Bosch(Infineon main chip) incl. Flash eeprog without opening the ECU box.
2.Reduce the risk of opening the box,ECU chip Tuning 1.99 can clone and copy infineon main chip,can modify the date,read and write date,upgrade the power etc.
3.The price is less than one tenth od its similar tools
4.No token limitation. Can calculate Checksums.
KTM-BENCH can not connect to internet, can not update, and do not use other software, otherwise it will destroy the device!
1. The new SDconnect C4 (1:1 clone of the original) is able to work for DoIP.
2. You don't have to install batteries for firmware update.
3. The wireless connection is stable.
4. Supports Original software(DTS Monaco & Vediamo) etc..
5. New SD C4 is made of superb craftsmanship and good quality, waterproof, shockproof and tamper-proof.
6. This package come with latest software HDD V2020.03
Iprog+ Iprog Pro is a powerful tool on Airbag,carradio,dpf off, ECU,IMMO KEY, MIL TO KM, PINABS,PINCODE SMATRA3,PINCODE SENSOR SPEED LIMIT,ODO Adjust,EEPROM,MCU-Atmel,Fujutsu,Microchip,Motorola,Motorola912EN,NECV850,BLR,CAN,CRC_Cript,ibutton,sd_unlocker,test
1) Read the common EEPROM
2) Program MCU on board, program ECU and so on
3) Update free online
4) Latest version: V4.9.2
This is Newest Original FLY SVCI 2018 FVDI ABRITES Commander Full Version with 18 Software.
New Red PCB KTAG V7.020 with 4 LED,added 140 more ECU types and color GPT Cable for GPT Function.It can easily read and decrypt the secret password,Unlimited Token.Supports Online Version operation.
1.Original X-100 PAD2 not only provides customers with professional key programming but also supports special functions for workshop including mileage adjustment, oil service light reset, timing belt service light reset, tire pressure warning light reset, EPB reset, throttle body reset, DPF reset, battery reset,steering angle calibration and OBD-II engine diagnosis.
2.What's more, the X100 PAD2 adds VW 4th & 5th IMMO.
1. Supports fastest add Benz Car keys,it is the fastest key programming tool to calculate the password at present.
2. Supports MB all keys lost, including 211,209,204,207,212,166,246,197,172,164 +, 216 ,special for European old models(W210, W203, W639, W220, W215, W169,W211) via obd directly.
3. CGDI MB Prog can calculate the password Once free each day.
The Latest Version is V220.127.116.11
1. KTMFLASH can read the chip data,read & write ECU data,read transmission data etc at a high speed.
2. Support V-A-G DQ200 DQ250 Infineon Bosch & 271 MSV80 MSV90
1. It is Made by Acrylic board, With Mesh and 4 Probe Pens.
2. LED works for 12V. After you connect with the probe,then you disconnect 12V battery for LED,it will work.The probe pin is adjustable.
3. This LED BDM FRAME is the best bracket for ECU Update/ECU Brush and Write/ECM Modified and programming/Probe holder/Dimsport aids.
4. Work on KESS,KTAG,FGTECH,BDM100,KTM100,CMD, DIMSPORT AIDS...ECM Chip Tuning Tools.
5. It is easy to be use,much better than old bdm frame.