MPPS V21 MAIN + TRICORE + MULTIBOOT with Breakout Tricore Cable
MPPS V21 Firmware V1.09.03 MAIN + TRICORE + MULTIBOOT with Breakout Tricore Cable
This module adds support for advanced functions on Marelli ECU’s. MPPS covers a range of controllers including M3.8, M5.9, ME7xx, MED9, MED17, EDC15/16/17, Delphi, Siemens, Marelli, Delco, Sagem, Trionic and many others…
Note: Can only use the software come with this package, Please do not use other software！
MPPS V21 Features:
1.Latest Software version: V21
2.Package comes with Breakout Tricore cable.
3.Warranty: one year
Read / Write of Micro, Flash and EEprom without using a BDM programmer!
Fiat 6F3 – Full Read / Write Micro, Flash and EEprom over K-line and CAN.
Fiat 6JF – Full Read / Write Micro and EEprom over K-line.
Fiat 8DF – Full Read / Write Micro and EEprom over K-line.
Fiat 8F2 – Full Read / Write Micro and EEprom over K-line and CAN.
Fiat 8F3 – Full Read / Write Micro and EEprom over K-line and CAN.
Fiat 8GM – Full Read / Write Micro and EEprom over CAN.
Fiat 8GS – Full Read / Write Micro and EEprom over CAN.
Fiat 5SF3 – Full Read / Write Flash and EEprom over CAN.
Fiat 5SF3 – Full Read / Write EEprom over K-Line.
Fiat 5SF8 – Full Read / Write Flash and EEprom over K-line and CAN.
Fiat 5SF9 – Full Read / Write Flash and EEprom over CAN.
Fiat ME7.9.10 – Full Read / Write Micro over CAN.
Fiat ME7.6.3 – Full Read / Write Micro over CAN.
Opel 6O2 – Full Read / Write Micro, Flash and EEprom over K-line and CAN.
Opel 6O3 – Full Read / Write Micro, Flash and EEprom over K-line and CAN.
Opel 6JO – Full Read / Write Micro and EEprom over K-line.
This MPPS V21 module adds boot mode support for controllers with the tricore processor. Features:
Auto detects ECU and processor type. No need to select from list, everything is automatic!
Read/Write of all memories Eeprom, Irom, Xrom (where possible)
Patch function for OBD Flashing of TPROT ECU’s (supports only VAG at the moment)
TPROT / DS check feature, for testing if TPROT is active without opening ECU.
Supports Bosch upto TP12
Supports Siemens (current only for ECU’s without password protection),
Support for unlocking of VAG Simos PCR and Simos 8.
Checksum Correction supported for Bosch MEDC17.
The MPPS is a powerful programming tool. It offers general reading / writing operations and checksum support, however it also includes some additional features:
Excellent recovery functions. In some cases MPPS can recover ECU’s which others tools can not even make communications with. On certain controllers it even works when with no program is present (a blank memory).
Selectable full / partial reading and writing when the ECU allows this function.
Selectable reading / writing speed.
Writing “changes only” function for faster programming (when supported by the ECU).
Auto detection of K-Line/CAN, and option to bypass and force preferred means of communication.
Temporary bypass of immobiliser to allow flashing on the bench on ME7 systems.
Boot mode support for ECU’s with C167 and ST10 processors.
EEprom read/write functions for some ECU’s are included.
VAG MEDC17 TPROT level checking without opening the ECU.
MPPS V21/V18 Review: (using PCB above)
Read written FLESH + MPC + EEPROM fiat marely 6f3, OK through OBD.
There are few tools that read-write EEPROM marely by OBD.
OBD-flash reading 3min 20 sec., 45 sec-writing.
MPC and EEPROM read OBD-20 seconds, 20 seconds writing (multyboot OBD) .A very strong and stable tool.
its always a risk with edc17 , this ecu opens easy , boot is safer , if you trust your tool you have to make a choice
tested edc16u1 from T5 2007 1.9tdi AXB 77kw.
read write ok over obd on kline.
make sure you remove the fan plug from fan controller when writing on this cars. when flash is erased the fan will work on max speed .
Ems3132 Bootmode. Read ok. Write not ok.
It erases the flash and cannot write.
Revived by k-tag.
MPPS V18 do not have capabilities to read and write PSG16 trough K-line.
If you want to flash PSG16 In Astra G, or Zafira A with MPPS V18, you must connect to CAN lines directly.
Vectra C, Signum etc - through OBD port.
It is not so bad for a 50-60 euro tool !!!
Jetta 2,0 16v TSi 200cv - MED17.5.2 Tprot10
Read in Boot = OK
made OBD unlock and CKS by MPPS, write boot = OK
siemens ppd 03G 906 018 AQ
BRD: R4 2.0l PPD1.3 G 9973
read ..write obd ok..
it's working.both can and kline. tested on bmw edc16c31,edc15v/,edc16u1
mpps in bootloader-obd can calculate checksum
Marelli 6F3 or others...
Audi a4 edc17cp14..read... write obd ok.
HW: 03L 906 022 B
R4 2,0L EDC H01 4375
NISSAN Q. EDC16CP33 (4A44383842) R/W OBD = OK (CRC-OK).
Magneti Marelli 6f3, 6JF, 8F2, 8F3 in obd and multiboot with micro and eeprom works very well!
Alfa Roméo Giulietta 2L 170cv EDC16 C39 (can line): read/write by obd ok. Flash ecu failure: mode recovery ok.
Fiat Punto evo 1.3L jtdm 75cv Mareli Multijet MJD8F2/3:read/write by obd ok. Flash ecu failure: mode recovery ok.
Susuki SX4 1.9L 120cv EDC16 C39 (can line): read/write by obd ok. Flash ecu failure: mode recovery ok.
edc16C39 and mjd8 work fine on good V18....without recovery........
Write edc16C39 failure with fgtec v54, solder failure at the usb socket,
Recovery of ecu with v18 mpps. I confirm my mpps, read write without problem.
Reading psg16 opel zafira ok, writing ok but does not start, does not edit cheksum, write original, everything ok
Used MPPS V18 to Read Flash from Vauxhall Astra 1.7 CDTI 2012 Denso ECU very quick with no issues.
And also EDC17 CP20 on Volkswagen Passat 2.0 TDI 2009 took about 3 minutes..
Suzuki SX4 DDIS 1.9L 120hp, Bosch EDC16C39 2008, can & kline, read & write by obd ok.
mpps= read= unlok file = write unlok file = not boot = kess obd2 = open file unlok = write obd2 kess= ok
opel corsa 1.3jtd MT marelli ecu 6J0 C1,read/write true obd=ok. he reads 448kb and write it,wery fast...
Magneti Marelli 6f3, Reading at the BDM works very well!
Opel Corsa 2004 1.3cdti ecu Marelli MJD6JO.C2 Read OK, Write NOT OK (using full read dump in both cases, read and write), ecu not booting at all.... need to fix it by BDM.
tested today edc16u31 on mk5 golf for a egr off, and all ok read write on kline.
Credits to all feedback! many thanks
Software figures shown as follows:
PCB Board Display:
1pc x MPPS V21
1pc x Breakout Tricore cable
1pc x CD Software
Scan Our QR code by your mobile phone
Shipping and delivery Attention:
For MOST non-free shipping goods, default shipping method is DHL. Need 3-5 working days on the way after dispatch the goods.YANWEN Express:
7-14 working days on the way, no need to pay tax for most european counties.EMS:
6-10 working days on the way. To Russian only send by EMS. For some remote area, if you do not want to pay remote fee, we can send it to you by EMS too.Aramex:
4-6 working day. To most middle east counries. If you do not like this shipping method, please leave message on your order.Flat airmail:
7-18 working days on the way. For remote area or holiday, need more time.Attention:
If you needs YANWEN express shipping or other shipping method like UPS, TNT, FedEx and so on, or you have special needs for your order, such as declared name and so on, please leave message on the order to notify us
. Otherwise we will send the order as our usual practice.
As different country has different import policy, sometimes we will change the shipping method based on the counties and goods.
When you get the parcel, before sign for acceptance, please check the package to make sure the product is correct and no damage. After sale service:
Any question you want to know or issue on usage. Please send email to sales@OBDexpress.co.uk. Please give us your detailed description, or error photo. We will provide the solution or solve it for you by teamviwer. For some special function, you can take the photo or video and send us to check if you operate it rightly.For any question, please contact us at:Online Customer Service