How to use Ktag 6.070 via Internet


Thread: ktag sw 2.13 hw 6.070 internet connection solution
I´m posting the solution to solve all grey in ktag 6.070 coz network connection is not allowed to use with Ktag programmers except Ktag 7.020.


1 install ksuite 2.08 
2 download the file 
3 the file have 3 parts (sd card, update too ksuite, nxp bin if necessary)
4 put the file update in the past off ksuite 2.08
5 use new sd card ( in my case the old one doesn't work )
6 copy the file to sd card 
7 open ksuite the ksuite update auto

If works after install the ksuite that you want, if doesn't work you have to re-flash the nxp the file is there for me was not necessary

Don't use the internet like me when the tool is connected 

link:  no pass
https://mega.nz/#!VGZCDaqb!T1LokpdDAFIYBUfMKOazMBchb5cRuzyU5Yw4o5861Xc
If the link doesn’t work you can ask O.P. for help:
http://mhhauto.com/Thread-ktag-sw-2-13-hw-6-070-internet-connection-solution
 
This information is not mine, is work off some search in forum and help off some users. It’s never been verified with professionals. 
 
So if you wan use a ECU programmer via Internet, you’d better go to Kess V2 5.017 or Ktag 7.020. Both has been tested (by experts) no issues when used with network connection.