How to program remote to BMW 523i E39 2003 with VVDI tools


Confirmed! Remotes to Bmw 523i E39 2003 can be programmed by vvdi prog and vvdi2, cut by Condor XC-mini and generated by vvdi keytool.
Main steps:
Step 1: VVDI-Prog reads chip data
Step 2: VVDI2 programs a new remote
Step 3: Condor Mini cuts a new key
Step 4: Test the new key
Step 5: VVDI Keytool generates a remote
 
In detail...
 
Step 1: VVDI-Prog reads chip data
 
EWS3 box read ic: 0D69J use EWS3 adapter and VVDI Prog
vvdi2-bmw-523i-e30-remote-1
vvdi2-bmw-523i-e30-remote-2
vvdi2-bmw-523i-e30-remote-3
vvdi2-bmw-523i-e30-remote-4
vvdi2-bmw-523i-e30-remote-5
vvdi2-bmw-523i-e30-remote-6
vvdi2-bmw-523i-e30-remote-7
vvdi2-bmw-523i-e30-remote-8
vvdi2-bmw-523i-e30-remote-9
vvdi2-bmw-523i-e30-remote-10

Connect EWS3 adapter and soldering cable same as the diagram
vvdi2-bmw-523i-e30-remote-11
vvdi2-bmw-523i-e30-remote-12
vvdi2-bmw-523i-e30-remote-13
vvdi2-bmw-523i-e30-remote-14
vvdi2-bmw-523i-e30-remote-15
Type: immobilizer; brand: bmw, chip: ews3-kline(od69j)
vvdi2-bmw-523i-e30-remote-16
Connect 12v dc to VVDI-Prog
vvdi2-bmw-523i-e30-remote-17
Read and save dump file
vvdi2-bmw-523i-e30-remote-18
vvdi2-bmw-523i-e30-remote-19
vvdi2-bmw-523i-e30-remote-20
vvdi2-bmw-523i-e30-remote-21 
Step 2: VVDI2 programs a new remote
 
Vvdi2 Transponder programmer
vvdi2-bmw-523i-e30-remote-22
vvdi2-bmw-523i-e30-remote-23
Immobilizer data tool
vvdi2-bmw-523i-e30-remote-24
Euro BMW EWS3 use chip 7935 blank for program
vvdi2-bmw-523i-e30-remote-25
vvdi2-bmw-523i-e30-remote-26

Load eeprom/dump file, choose not use key position
vvdi2-bmw-523i-e30-remote-27
vvdi2-bmw-523i-e30-remote-28
Put chip 7935 and make a dealer key
vvdi2-bmw-523i-e30-remote-29
vvdi2-bmw-523i-e30-remote-30
vvdi2-bmw-523i-e30-remote-31
Prepare a dealer key successfully. Now the key can start the engine
vvdi2-bmw-523i-e30-remote-32
 
Step 3: Condor Mini cuts a new key
 
vvdi2-bmw-523i-e30-remote-33
vvdi2-bmw-523i-e30-remote-34
vvdi2-bmw-523i-e30-remote-35
vvdi2-bmw-523i-e30-remote-36
Step 4: Test the new key
 
Test the new dealer key to check if it works good as the original or not
vvdi2-bmw-523i-e30-remote-37
Before test, you should install the EWS3 box and try to start
vvdi2-bmw-523i-e30-remote-38
Turn on for a second to synchronize the new key
vvdi2-bmw-523i-e30-remote-39
The car start successfully
 
Step 5: VVDI Keytool generates a remote
 
Remote can be generated by VVDI Key Tool and programmed manually
vvdi2-bmw-523i-e30-remote-40
Manually program the key
vvdi2-bmw-523i-e30-remote-41
 
Done!