How To Use 2M2 Tank Key Cutting Machine


Matched product:

Newest 2M2 Magic Tank (X6 PLUS) Automatic Car Key Cutting Machine

Newest 2M2 Magic Tank (X6 PLUS) Automatic Car Key Cutting Machine

1,175
  • Item No. SL442-B
  • Out Of Stock
2M2 Magic Tank is an automatic car key cutting machine, which can be used via Bluetooth on Android system without battery.
Very easy-to-use ,Chinese and English menus are optional, with video operation.
2M2 Tank (X6 PLUS) Update from Sep 2020 supports create key blank
How to Change Cutter and Probe for 2M2 Tank Machine

Rotate the handwheel to move the middle clamp to the left.
2M2 Tank Machine Change Cutter and Probe 1
Let the middle clamp completely against the left clamp
2M2 Tank Machine Change Cutter and Probe  2
Insert the cutter/probe to the top
2M2 Tank Machine Change Cutter and Probe  3
Let the middle clamp completely against the left clamp
2M2 Tank Machine Change Cutter and Probe  4
Loosen the fixing screw of the probe.pull the probe down until the clamp platform,then tighten the screw to complete the operation
2M2 Tank Machine Change Cutter and Probe  5
Pull the probe down until it touch the clamp platform,then tighten the screw.
2M2 Tank Machine Change Cutter and Probe  6

How to Fix Key on 2M2 Key Cutting Machine Clamp?
162-T Key:
Please set the key embryo in the left side
2M2 Tank Machine Change Cutter and Probe  7
Let the front end of the key close to the first slot and does not exceed it.
2M2 Tank Machine Change Cutter and Probe 9
The key remains level on the platform and clamp it
2M2 Tank Machine Change Cutter and Probe  10
FLAT Key
Please set the key embryo in the right side
2M2 Tank Machine Change Cutter and Probe 11
Left the front end of the key close to the first slot and does not exceed it
2M2 Tank Machine Change Cutter and Probe  12
The key remains level on the bottom and clamp it
2M2 Tank Machine Change Cutter and Probe  13
FLAT Key Shoulder:
Use the stop and insert it to the right slot
2M2 Tank Machine Change Cutter and Probe  14
Block the key shoulder and clamp it.
2M2 Tank Machine Change Cutter and Probe  15
HU64 Key:
Use an HU64 clamp,insert the key and then tighten the screws
2M2 Tank Machine Change Cutter and Probe  16
Set the HU64 clamp to the bottom of the clamp in the right side and clamp it
2M2 Tank Machine Change Cutter and Probe  17
Attention,the HU64 clamp must be against this side
2M2 Tank Machine Change Cutter and Probe  18
HU66 Key
Please set the keyembryo in the right side
2M2 Tank Machine Change Cutter and Probe  19
Block the key shoulder with the edge of the clamp
2M2 Tank Machine Change Cutter and Probe  20
The key remains level on the bottom and clamp it
2M2 Tank Machine Change Cutter and Probe  21
LASER Key
Please set the keyembryo in the left side:
2M2 Tank Machine Change Cutter and Probe 22
Let the front end of the key close to the first slot and does not exceed it
2M2 Tank Machine Change Cutter and Probe  23
The key remains level on the bottom and clamp it
2M2 Tank Machine Change Cutter and Probe  24
Laser Key Shoulder:
Use the stop and insert it the left slot
2M2 Tank Machine Change Cutter and Probe 25
Block the key shoulder and clamp it.