Korea MIRACLE-A7 Key Cutting Machine technical support
korea-miracle-a7-key-cutting-machine-user-manual.pdf (2.5M)
What should you pay attention to when you charge the battery for Korea MIRACLE-A7 Key Cutting Machine
This is the battery charge video: http://youtu.be/ZyTY4casIPg
1) For fist step: turn the red round button to the right and press another to battery on, then you will see the machine is out of charge.
2) Find the power adapter, MUST be 15V 3A, if you use 13V or less, it will fail to charge the battery. connect the power supply as the video
3) turn the red round button to right again, and press another button to battery off, If now machine can be started, it means power adapter is ok, connection is ok. machine is ok. If machine cannot be turned on, check the power supply and the cable connection.
4) Now press square button to battery ON and press the round red button. It will power off the machine, and on this situation, battery will be charged by the power adapter. Now just leave all the connection ready and do not do anything. Wait about 90 minutes, battery will be charged ready. Attention: When you charge battery, machine must be powered off. Otherwise battery will not be charged.
5) after 90 minutes, disconnect the USB cable with your machine, turn the red round button to the right to start the machine, you will see now battery is full of charge.
