LAUNCH X431 PRO3S+ SmartLink HD is the upgraded version of X431 PRO3S+HDIII. It's the LAUNCH TOP Scanner, ranks No.1 in vehicle coverage which supports 12V & 24V Vehicles ALL IN ONE. It can work for cars/trucks/buses/trailers/excavators/diesel engine/construction machinery/ pick-up, etc. Use it to test SCANIA windscreen wipers, works like a charm!
Operation steps:
Connect X431 SmartLink HD to the vehicle diagnostic OBD port, and connect to X431 PRO3S+ scanner via WiFi
Open X-431 HD APP
Click on “Local Diagnosis”
Click on “Scania”
Confirm the Scania diagnostic software (i.e V15.70), and click “OK”
Connect the VCI in WiFi mode
Click on “CAN Automatic Identification”
Click on "System Scan" for a full vehicle checkup
Wait a while…
Click on "VIS" and click on "ENTER"
Confirm the vehicle info detected
Click on "Actuation Test"
Click on “Windscreen Wipers, Low Speed”
Pay attention to the prompt
Test Conditions:
During actuation, the engine RPM and vehicle speed must be 0. If the engine RPM and vehicle speed are recorded or signal is lost, actuation is impossible.
Click on "On", and the value shows “On”.
Click on "Off", observe wiper condition.
LAUNCH X431 PRO3S+ SmartLink HD:
https://www.obdexpress.co.uk/wholesale/launch-x431-pro3s-plus-smartlink-hd.html
