Lonsdor K518 Pro Key Addition Guide: 2011-2019 Chrysler

This is a tutorial on how to add new Chrysler keys with Lonsdor K518 Pro by OBD. Before key programming, we need to read its PIN code free firstly.

Immo & remote >> CHRYSLER >> Select from vehicle >> Middle East >> Grand voyager >> 2011-2019 >> FOBIK >> Read PIN code

Will start to read PIN code? OK

K518 PRO gives the PIN code: 1245

Click "Add new key".

Insert key to be added and switch ignition on.

Enter 4-bit PIN code.

Programming complete.

Here we can check the operation procedure:

Function >> Operation

Tips: need PIN code.

Add new/old key

1. Insert a key to be added, and turn ignition on;
2. Please enter 4 bits PIN code;
3. Programming complete.

Delete key

1. This function will delete all registered keys;
2. Please enter 4 bits PIN code;
3. Delete complete.

Key count

1. Current key count: 0.

Add remote

1. According to the following instruction, complete the operation carefully and swiftly. Please complete below operation in 60s when the buzzer beeps;
2. Please enter 4 bits PIN code;
3. Press both lock and unlock buttons together for 1s and release them, press the unlock button until you hear beeps, do the same operations for all remotes;
4. Programming complete.

Read PIN code

1. Start to read PIN code, press "OK".
2. Trying to get PIN code...
3. PIN code: 2E69

Attention

1. Pin is required when adding or deleting keys.
2. Delete key function will delete all the registered keys.

Reference

Program transponder/chip: Yes

Remote type: FOBIK

PIN code required: Yes

PIN reading method: Read with the device first, or query.

Remote function generation: generate automatically when key programming is complete.

www.obdexpress.co.uk