OBDSTAR P003 Kit can work with OBDSTAR X300 DP Plus (Key Master DP Plus)/X300 Pro4 (Key Master 5) to read BOSCH ECU data/CS/PinCode, etc via Bench/Boot on Audi, Citroen, DS, Mahindra, Peugeot, Skoda, SEAT, Volkswagen etc. It only takes less than 5 minutes. Faster than the general operation!
OBDSTAR P003 Kit Supported ECU List:
BOSCH EDC17U01 (TC1766)
MED17.5 (TC1766)
MED17.5.1 (TC1766)
MED17.5.20 (TC1766)
MED17.5.5 (TC1766)
MED17.5.5 HW2 (TC1766)
EDC17C46 (TC1767)
ME17.5.6 (TC1767)
ME17.5.20 (TC1767)
MED17.5.2 (TC1767)
MED17.5.5 (TC1767)
MED17.5.5 HW2 (TC1767)
MED17.5.21 (TC1782)
MED17.5.25 (TC1782)
EDC17C54 (TC1797)
EDC17C64 (TC1797)
EDC17CP44 (TC1797)
EDC17CP44 MS (TC1797)
ME17.1.1 (TC1797)
ME17.1.6 (TC1797)
MED17.1.1 (TC1797)
MED17.1.1 MS (TC1797)
MED17.1.6 (TC1797)
MED17.4.4 (TC1793)
MD1CS018 (Euro 6/TC298TP)
MG1CS042 (Euro 6/TC298TP)
MG1CS003 (Euro 6/TC298TP)
etc.
Here takes ECU (MED17.4.4) as an example to show how to read pincode with x300 DP Plus and P003 kit.
What's required:
OBDSTAR X300 DP Plus with main cable & charge
OBDSTAR P003 Kit (P003 adapter+ ECU BENCH cables)
PEUGEOT/CITROEN/DS ECU (MED17.4.4)
Operation mode:
On bench
Step-by-step to read PinCode:
Keep the X300 DP Plus in charging with 12 V power and communication in the whole process.
Select CAR IMMO>> All>> PEUGEOT/CITROEN/DS Newest version>> Read Pincode>> All keys Lost Read>> ECM>> BOSCH MED17.4.4 (BENCH)>> Read PinCode
Click 'Guide' in the lower left to check the wiring diagram
Connect X300 DP Plus and OBDSTAR P003 adapter by the main cable
Then connect the other end of P003 adapter to ECU with the ECU BENCH cables
Click Esc>> Enter to read PinCode
Reading DFLASH…
Firmware configuring…
Reading PinCode…
This process takes about 1-8 minutes.
Read out the PinCode is N7G6
It's so simply and fast to read Pincode by OBDSTAR P003 Kit. Save you much time!
