OBDSTAR X300 DP Plus is available with a major upgrade for car IMMO, adding 4A proximity key programming (free pincode) for TOYOTA COROLLA 2019-.
Prepare:
OBDSTAR X300 DP Plus or KeyMaster DP Plus
Cable needs: OBDSTAR CAN DIRECT KIT
Step-by-step procedure:
1.Read IMMO data(on BENCH)
①Connect OBDSTAR X300 DP Plus / KeyMaster DP Plus to a car, enter into【CAR IMMO】.
②Click【All】, input letters such “TO” in search bar, click【LEXUS TOYOTA SCION】;
Tips: by searching keywords, find out related models quickly.
③Click the newest LEXUS TOYOTA SCION edition.
④Click【Manual Select Model】.
⑤Click【TOYOTA】.
⑥Click【ASIA】.
⑦Click【COROLLA】.
⑧Click【PROXIMITY】.
⑨Click【2019-】.
⑩Click【Read Immo Data(BENCH)】.
⑪Connect the diagnostic device and smart key ECU through the jumper cable, power the device, click【Enter】.
Tips: can click【Guide】to check wiring diagram in details.
⑫Ensure the internet connection is normal, click【Enter】.
⑬Pls reenter the filename to save, click【Enter】.
⑭Confirm the filename, click【Enter】.
⑮Operation success, click【Enter】.
Tips: the file folder position saved: DP-device serial number-Data
2.Add keys
①Click【Add keys】.
②Pls ensure the internet connection is normal, click【Enter】.
③Note: Less than 6 keys can be programmed. Pls complete all steps within the specific time, click【Enter】.
④Switch ignition on, click【Enter】.
⑤Turn on the emergency flasher, shut off the ignition, click【Enter】.
⑥After the Immo data has been read, please click【Enter】.
⑦Click the IMMO data, click【Enter】.
⑧Click【Enter】.
⑨Caution! Pls finish step 1 and step 2 in below pic before progress bar full.
⑩Program successfully. If remote control doesn't work, pls execute【Program ID Box With Steering Lock】.
