Reviews on the Benz diagnostic tool sd c4, c5, C6
Reviews on the differences among Benz c4, c5 Multiplexer, VCI clone C6 etc.
Difference between Benz c4 and c5 Multiplexer
C4 comes sometime with and sometimes without UDS Chip.
The Xentry C5
which costs about 400-700 EUR is a C4 inside with C5 Body.
The C5 from 1100 EUR up is a DoIP Multiplexer with internal HDD or SSD. All the programs are stored in the Multiplexer, You only need a Laptop with 30 GB Disk Space for the Programs.
sdconnect c4 plus with free Vediamo and DTS:
Best MB Star C5:
I've brought a China C4
with Dell laptop.
As you can see the laptop is old model and used, it is very slow ~
The C4 is new but it is cheap clone…
So end up I use my old laptop, i7 8GB ram and SSD to rebuild the whole system.
Installed Xentry 05.2018, EWA 2018, Vediamo 5.01, DTS Monaco
All patched and working.
It run much faster !
Some China seller install Xentry with Chinese loader,
So that if you move the HDD to another computer or clone it to SSD,
Xentry will ask you to contact seller to register ~
Installation is not that difficult, just need some computer knowledge,
And you can find all the source in this forum.
Software is not the most important,
Knowledge and flash files and the "keys" are the most important!
I'm still learning, see what I can do.
VCI clone (C6) feedback
This device unlike any other devices . The device "C6" have a particularly rules first of all the reseller must send you the driver's files for each version because it is not like C3 , C4 , C5 devices working with any version.
like, if you have xentry version 12 2018, and you want install "Xentry" versions 05 2019 or 09 2019
you will have to have the driver files for versions 05 2019 , or 09 2019 from the manufacturer.
can use ordinary XDOS without VXdiag Driver.
Only config ecom and ready.
No wireless or wifi, usb and lan only.
Use ordinary Xentry openshell
It doesn't work with older DAS vehicles.
Doip is working.