Ship from UK, fast delivery and no tax!

3055B SKS-3055B ECU Signal Generator

Out of Stock. History 17 sold. Item No. SE72

Buy Now: 169.00
Sep. Sale, Bottom Price! www.obdexpress.co.uk/producttags/sep-sale.html

Ship From UK, No Tax,Please check: UK Ship & No Tax

You can Contact us to get Bottom Price:
Email: sales@OBDexpress.co.uk
WhatsApp: +86 18750906257
Skype: obd2express.co.uk
Weight:
1.6KG
Package:
35cm*31cm*10cm ( Inch: 13.78*12.2*3.94 )
Returns:
Return for refund within 30 days,buyer pays return shipping. Read details »


Product Description

SKS-3055B Auto signal generator designed under the rules by the diagnosis of auto electronic control systems and electronic circuit signal characteristics, specifically designed for the auto service technician. This instrument easy to use, supplied with cables for variety sensors. Also have the network support for auto sensors database. Used for Automotive fault diagnosis, ECU repair, EECU teaching fields, etc.
3055B SKS-3055B ECU Signal Generator

II. Description of the Panel


Instrument Features

 
1, Signal Characteristics Adjustment: Adjust the amplitude, frequency, phase, X + Y, waveform and other indicators, while the signal output. This is very convenience for auto ECU repair.
 
2, Multi-output signal: Made by high-performance microprocessors, can output 7 signals simultaneously.
 
3, Human control interface: By the simple design ideas, 128*64 LCD, Bilingual display, easy to operate.


 
4, Cables: Supporting common sensor cables, for various models.


 
 
Function Introduction
 
This instrument can simultaneous output sinusoidal, square-wave, X+Y signal, voltage signal, oxygen sensor signal, resistance signal and PWM signal, which includes all the common signal characteristics of automotive sensors.
 
1.Sinusoidal signal:
 
* 1--2KHz Frequency regulation;
 
* Signal Single-ended output to ground;
 
* 5Vpp--18Vpp Amplitude adjustment.


 
Mainly used for simulate the rotating speed, wheel speed, vehicle speed signals, which was generated by magnetic sensor.
 
 
2. Square-wave Signal:
 
* 1--20KHz Frequency regulation;
 
* Signal Single-ended output to ground;
 
* 5Vpp--9Vpp Amplitude adjustment.

 
Used for simulate the rotating speed, wheel speed, camshaft position and air-flow signals, which was generated by Hall sensor and photoelectric sensor.
 
 
3.  X+Y Signal
 
* 1--2KHz Frequency regulation;
 
* 5Vpp--18Vpp Amplitude adjustment;
 
* 1--60 X+Y signal adjustment.
 
* 1--3 X+Y signal adjustment.
 
* 0°, 180° Phase position adjustment.
 
* X+Y signal outputted by Square-Ground, Sine-Ground and Sine-Couple, easy to simulate various crank signals.
 
* Sine-wave and Square-wave switched while Signal-Ground output.


 
Used for simulate the X+Y signal of Magneto electric, photo electricity and Hall sensors.
 
4. Voltage Signal:

 
* 0--5V Voltage adjustment.
 
* Output voltage precision 0.02V.
 
* Signal Single-ended output to ground
 

 
Used for simulate the voltage signal of Throttle Position, MAP and EGR Valve Position Sensors.
 
5. Oxygen Sensor Signal:

 
* The 0.1V, 0.9V Oxygen ion Dilute and Concentrate can be switched at anytime.
 
* Signal Single-ended output to ground
 

 
Used for simulate oxygen ion concentrate signal by kinds of oxygen sensors.
 
6. Resistance Signal
 
* Precision Multi-turn pointer potentiometer.
 
* 0--10K Ten loop output, MIN 22Ω
 

Used for output signal of coolant temperature, intake air temperature and temperature sensors. It must be realized by simulate resistance signal.
 
 
7. PWM Signal
 
* 2 Hz -- 999+-1 Hz Frequency can be adjusted independently.
 
* 1% -- 99%+-1% Duty cycle can be adjusted independently.
 
* Signal Single-ended output to ground.
 
* 9Vpp amplitude fixed output.
 

 
Used for simulate the ignition control signal, fuel injection control signal, camshaft position signal, EGR control signal and some other pulse signals.
 
 
Instructions
 
1, Power
 
Use outlet power, switch leader cable (ACCES.1) into button Nine-pin jack. Use the power line (ACCES.2) can easily connected with 12V car battery; Use stabilized voltage supply, work condition: current greater than 2A, Voltage between 10V-15V. Use 220V/12V power adapter, please NOTE: Current ABOVE 1A, Voltage shall NOT above 15V. Power output plug should match with the instrument.

2, Button and Main Men


3, Generation of sinusoidal signal

After power, choose "Sinusoidal signal" (Fig.19), press" CONFIRM" into Sinusoidal interface (Fig.6), choose "Frequency" and "Amplitude".

* Adjust Frequency: After enter (Fig.6), use "LEFT" and "RIGHT" choose frequency value; use "UP" and "DOWN" choose magnitude. Press CONFIRM after the adjustment.

* Adjust Amplitude: After enter (Fig.7), use "LEFT" and "RIGHT" choose Sinusoidal signal amplitude; use "UP" and "DOWN" choose range.

* Signal output: Choose square-wave and Sinusoidal output cables(ACCES.3), the BLUE wire shall generate the Single-ended output to ground Sinusoidal Signal by( Black clamp)

 

4, Generation of Square-wave Signal

After power, choose "Square-wave Signal" (Fig.19), press "CONFIRM" into Square-wave Signal interface (Fig.8), choose  "Frequency" and  "Amplitude".

* Adjust Frequency: After enter (Fig.8), use  "LEFT" and  "RIGHT" choose frequency value; use  "UP" and  "DOWN" choose magnitude. Press CONFIRM after the adjustment.

* Adjust Amplitude: After enter (Fig.9), use  "LEFT" and  "RIGHT" choose Square-wave Signal amplitude; use  "UP" and  "DOWN" choose range.

* Signal output: Choose square-wave and Sinusoidal output cables (ACCES.3), the GREEN wire shall generate the Single-ended output to ground square-wave Signal by Black clamp.

5, Generation of X+Y Signal

After power, choose "X+Y Signal" (Fig.19), press "CONFIRM" into X+Y Signal interface (Fig.10), choose "Frequency" "Amplitude" and "Waveform".

* Adjust Frequency: Choose "Frequency" into "X+Y Signal Interface" (Fig.10, 11, 12), use  "LEFT" and  "RIGHT" choose digit; use "UP" and "DOWN" choose range. Press CONFIRM after the adjustment.


 

Hot Sales on Autel and Xhorse, Fast UK Ship & No Tax

Hot Sales on Autel and Xhorse, Fast UK Ship & No Tax

obdexpress-shopping-progress
Shipping and delivery;Attention:

DHL: For MOST non-free shipping goods, default shipping method is DHL. Need 3-7working days on the way after dispatch the goods.
YANWEN Express: 7-14 working days on the way, no need to pay tax for most european counties.
EMS: 6-10 working days on the way. To Russian only send by EMS. For some remote area, if you do not want to pay remote fee, we can send it to you by EMS too.
Aramex: 5-10 working day. To most middle east counries. If you do not like this shipping method, please leave message on your order.
Flat airmail: 7-18 working days on the way. For remote area or holiday, need more time.


Attention:
If you needs YANWEN express shipping or other shipping method like UPS, TNT, FedEx and so on, or you have special needs for your order, such as declared name and so on, please leave message on the order to notify us. Otherwise we will send the order as our usual practice.
As different country has different import policy, sometimes we will change the shipping method based on the counties and goods.
When you get the parcel, before sign for acceptance, please check the package to make sure the product is correct and no damage.


For any question, please contact us at:

E-mail:sales@obdexpress.co.uk
Customers who viewed this item also viewed