AUDI C6 Q7 A6 Steer Column Module J518 ELV Module Emulator with VVDI Dedicated Programming Cable

Item No. SO536 In Stock. History 141 sold.

Buy Now: 93
Contact us to get Better Price:
WhatsApp: +44 7418609676
Shipping:
Free Shipping Standard Flat Rate Shipping ServiceEstimated delivery time: 5-12 working days.See details »
Weight:
0.1KG
Package:
16cm*12cm*6cm ( Inch: 6.3*4.72*2.36 )
Returns:
Return for refund within 30 days,buyer pays return shipping. Read details »

Product Description

Applied to repair the AUDI sixth Gen A6 Q7 Audi C6 steering column lock J518 ELV module failure replacement emulator.
AUDI C6 Q7 A6 Steer Column Module J518 ELV Module Emulator


AUDI C6 Q7 A6 Steer column module J518
 
1.Universal solution, three types MCU all can replaced by this emulator.
(replace MCU Mask: 1L59W, 3L40K, OL01Y directly);

2.Stable and durable, No Vulnerable components such as relays, microswitch and motors on it.
 
3.Easy for replacing, write in the dump form original J518 Module with the WVDI PROG dedicated line directly, No need solder wire.
 
Note:

The emulator without lock or on lock function, if need the same function as the original J518 Module, please buy the J518 Replacement
 
The WDI PROG dedicated programming cable connector here is only for programming the emulator board, not for original J518 PCB board.
 
so if you have a car which need replace the J518 module with this emulator, you need read out the data in the MCU by soldering wire or other methods, then write the data into the emulator MCU via this Dedicated cable connector.

Free download J518 Flash that is in the emulator

Operating Instructions:
 
J518  256,128 simulate board instruction
 
As for reading and programming the original car,pls check the VVDI prog.
 
If your car is 9S12DG 128 CPU, the operation steps are as follows.
 
1. Read out the EEPROM data, atttention! Pls save the data, in case of any wrong operation.
 
2. Put the EEPROM data into the folder"EPROM 2K-4K", then double-click the EEPROM Converter application, and see that the original 2K file becomes 4K, the conversion is successful.
 
3. After runing the sytem, the file to be 4K, then the programming succeed
 
Note: You can only double click one time, do not repeat. If the double-click run is unsuccessful, or no 4K file appears, then right-key to run the program in administrator mode.
 
Connect flashing wire and write the converted EEPROM file. Attention: simulator is a 256 chip then choose  J518 (2010) (0L01Y) required.
 
Each board is with ep data and FLSAH data, so usually you just need to write EP data.If not, you can write the EP data from your car with the FLASH data in the instruction.
 
If car is 9S12DG 256 CPU, the operation steps are as follows.
 
1. Read out and save the original car data, and write it directly to the simulator.
 
VVDI burning line: where: red (thick) =VCC black (thick) =GND yellow =RST purple =BKGD green =XCLKS White =CLK black (fine) =GND-C
 
without horn

AUDI C6 Q7 A6 Steer Column Module J518 ELV Module Emulator

With horn: wiring according to the silk print in the board ,same as board wihtout horn

AUDI C6 Q7 A6 Steer Column Module J518 ELV Module Emulator

Buy our special burning line, with speakers you can avoid welding burning, directly connect the 20pin port.

Attention:
The simulator is burned after the test, preferably on the car.
In the platform test, it is necessary to check the wiring of 20Pin port. Some of the platform wiring harness have production problems and are compatible with our burning interface, which may lead to chip damage.
Error wiring: 10 (red) should recover after 20 (blue) or as shown in the figure.


 
Package List:
 
1pc x AUDI C6 Q7 A6 Steer column module J518 ELV Module Emulator with VVDI Dedicated programming cable
 

FoxFlash ECU Programmer with Gree Gifts
Xhorse & Autel & Lonsdor Remote Key
obdexpress-shopping-progress

Shipping Method and Delivery Time:

EU, UK , US and Russia Warehouse Shipping: 3-5 working days. Fast Delivery & Tax Free.

China Warehouse Shipping:
DHL Shipping: 3-5 working days. Usually we declare a lower value on DHL invoice to help with customs clearance. Please remember to leave message if you have any special requirement.
Yanwen Express: 7-10 working days. No Tax for European Countries.
Standard Post: 7-15 working days. To South America and Africa countries it may take 20-25 working days. Customers can tick Express Shipping Service to ship by DHL.

For any question, please contact us at:
E-mail: sales@OBDexpress.co.uk
WhatsApp Business:+44 7418609676
WhatsApp After-sales Service: +86 18750906257
Skype: obd2express.co.uk
Facebook: https://www.facebook.com/obdexpress/
Youtube:Youtube obdexpress_uk

Tech Service

Car model and year: 2009 Audi A6

 

Purpose: to replace a steering column module, so need to pull the info from the old module and dump it on a new one. The replacement module im using is used. Do i need to try and virginize it?

 

Device to use:

  1. With Autel MaxiIM IM608

replace 2009 Audi A6 steering column module

 

Question: I'm having an issue when im trying to read the old chip. The scanner comes up and says chip unlocked failed.

 

How-to do next?

  1. On bench read and write epromm on the new and ready.

you read EPROM from the old module and save reading and then write that reading in the new module and also from the new you save a backup.

 

2.Autel can do with xp400 programmer, Doubles check picture, in XP400 we have 2 picture for this ezs,. Did you try to use both ?

Read mcu with programer and write data to secondhand.

Need to make sure the mask set is the same.

 

And yes: Always Virginize if replacing things

 

  1. Buy emulator by xhorse

If you adapt used without write data you odis online or buy emulator by xhorse.

I only 1.time have do this work, i try to read mcu whit xprog 5.5 , whit new all ok, whit my lost eeprom data, at the end i payed 80€ geeko and remote working, all fine.

replace 2009 Audi A6 steering column module

replace 2009 Audi A6 steering column module

replace 2009 Audi A6 steering column module

 

  1. if you have vvdi prog you can read old elv then write datas on new elv.

replace 2009 Audi A6 steering column module

 

  1. With R270 programmer: works

replace 2009 Audi A6 steering column module

 

Hope it helps!