Advanced TPMS diagnostics for complete TPMS health check
Activate 98% of all known TPMS sensors
Program AUTEL MX-Sensors
Comprehensive OBD relearn coverage
Onscreen relearn procedure
Read/clear codes for all available systems.
Display live data in text, graph & analog for easy data review
Auto VIN technology can automatically identify the vehicle’s make, model and year information in no time.
Reset Steering Angle Sensor (SAS)
Reset service mileage and service intervals
Relearn parking brake pad after replacement
Support forced DPF regeneration and adjusting injectors
Support battery registration and reset
|Operating System||AndroidTM 4.4.2, KitKat|
|Processor||Cortex-A9 processor (1.5 GHz)|
|Display||7-inch LCD capacitive touchscreen with 1024 x 600 resolution|
|Connectivity||Mini USB 2.0
HDMI Type A
Micro SD card (supports up to 32GB)
|Sensors||Light sensor for brightness auto changing|
|Audio input/output||Input: N/A
|Power and Battery||3.7 V/5000 mAh lithium-polymer battery
Charges via 5 VDC power supply
|Tested Battery Life||Around 7 hours of continuous use|
|Battery Charging Input||5 V/1.5 A|
|Power Consumption||600 mA (LCD on with default brightness, Wi-Fi on) @3.7 V|
|Operating Temp.||0 to 55°C(32 to 131°F)|
|Storage Temp.||-20 to 60°C (-4 to 140°F)|
|Operating Humidity||5% - 95% non-condensing|
|Dimensions (W x H x D)||270.8 mm (10.0”) x 176.0 mm (6.9”) x 36.0 mm (1.4”)|
|Net Weight||885 g (2.31 lb.)|
|Protocols||ISO9141-2, ISO14230-2, ISO15765, K/L-Line, Flashing Code, SAE-J1850 VPW, SAE-J1850PWM, ISO11898 (Highspeed, Middlespeed, Lowspeed and Singlewire CAN, fault-tolerant CAN), SAE J2610,GM UART,UART Echo Byte Protocol, Honda Diag-H Protocol, TP2.0, TP1.6|
Note:Make sure the diagnostic tablet is connected to the internet and the tablet has sufficient battery or is connected to a power source.
Step 1:Tap the Update application button from the Diagnostic Job Menu and the Update screen displays.
Step 2:Check all available updates:
a)if you want oto update all the items,tap the "Update All" button
b)if you want to update one or some of the item,tap the "Update" button on the right column of the specific item(s).
Step 3:Tap "Pause" to suspend the updating process.Tap "Continue" to resume.
Step 4: When the updating process is completed,the software will be installed automatically.The previous version will be replaced.
MaxiVCI Mini Firmware Update:
Step 1:Connect the MaxiVCI Mini to a PC using a USB cable.
Step 2:Run the "PC Suite" on the computer which is installed after the installtion of Maxi PC Suite and click MaxiVCI Mini icon on the Device Selection window.
Step 3:The driver will automatically detect the updates of the device.
Step 4:Click "Update" to complete the operation if an update is available.
Step 1:Connect the MaxiVCI Mini with the Diagnostic Tablet using a USB cable.
Step 2:Tap VCI Manager from the Diagnostics Job Menu,and then Update to complete the operation if an update for the MaxiVCI Mini is available.
Step 1:Visit official website:www.autel.com,then create an Autel ID and register the product with device's SN and password.
Step 2:Insert the MaxiVCI Mini into the vehicle's DLC,which is generally located under the vehicle dash.
Step 3:Long press the Lock/Power button to turn on the Diagnostic Table.
Step 4:Pair up the Diagnostic Table with the VCI device via Bluetooth to establish a communication link
When the VCI device is properly connected to the vehicle and the Diagnostic Tablet,the VCI status button at the buttom bar on the
display screen shows a green tick at the corner.This indicates your Diagnostic Tablet is ready to start vehicle diagnosis.