Ship from UK, fast delivery and no tax!
6% off

V2020.06 BENZ C6 OEM Diagnostic Tool ( MB STAR C6 ) with DOIP Xentry Diagnosis VCI Multiplexer HDD Software

In Stock. History 3 sold. Item No. SP332+SP332-S

Latest price: 429.00
Buy Now: 403.00 6% off
Black Friday Sale, Special Offer UP TO 30% OFF !
Date: 24th-30th Nov

WhatsApp: +86 18750906257
Free Shipping Express Shipping ServiceEstimated delivery time: 3-5 working days.See details »
23cm*21cm*7cm ( Inch: 9.06*8.27*2.76 )
Return for refund within 30 days,buyer pays return shipping. Read details »

Product Description

1. Support reading out & erasing trouble code,reading the real-time data of sensor and actuator, coding and programming.
2. Support wireless diagnose,K line,CAN BUS and UDS protocol, fit all computers, with multi-language.
BENZ C6 OEM DOIP Xentry Diagnosis VCI Multiplexer (MB STAR C6)

 Mercedes Benz C6 OEM Xentry diagnosis VCI DOIP Pasthru interfac is the latest interface for For Mercedes & SMART vehicles can replace Star C4/C5. XENTRY Diagnosis VCI acts as a Pass-through Interface, also called MB Star C6, For Benz C6 multiplexer to provide complete communication between a vehicle and the XENTRY software loaded on a PC.

Mercedes Benz Xentry diagnosis VCI DOIP Pasthru interface Benz C6 Overview:

Compatible Software: VXDIAG For XENTRY/Das Software
Support Vehicle: Mercede For Benz & Smart vehicles

DoIP: Support DoIP

Functions: Star Diagnostic & programming (SCN Coding)

What is DOIP?

DOIP is ISO 13400 diagnostic protocol
ISO 13400-1:2011 describes the general use cases and communication scenarios which are covered by an Internet Protocol-based vehicle communication standard. Each use case drives specific communication capabilities of the vehicle communication interface, for instance in order to be interoperable in an existing computer network.
The diagnostic communication over Internet Protocol (DoIP) protocol supports the standardized service primitive interface as specified in ISO 14229-2.
The descriptions in ISO 13400-1:2011 cover different application layer implementations, such as:
enhanced vehicle diagnostics (system diagnostics beyond legislated functionality, non-emissions-related system diagnostics);
WWH-OBD (World-Wide Harmonized On-Board Diagnostics) as specified in ISO 27145-2 and ISO 27145-3.
The mercedes  Land Rover JLR all use this new Diagnostic Protocol now.

Where need DOIP device?

when we test mercedes new car like w222  w205
In Audio\Comand section you can find DoIP test page.
If cable is DoIP you will see green mark that DEVICE is Ok.
Xentry will prompt you that other device must carry yellow marks.

Mercedes Benz Xentry diagnosis VCI DOIP Pasthru interface C6  Features:

  • Can be used for all model series of For Mercedes For Benz vehicles
  • Support DoIP, cover more functions during SCN Coding than SD C4/C5
  • Functions including diagnosing, programming, simulation studying, repair information, automotive maintenance, technical service bulletin and so on 
  • Diagnosis updates no longer necessary – firmware updates required on rare occasions
  • Does not need a power supply unit for external power supply
  • Dandy multiplexer with a small, sturdy construction (no PC core, battery, fan, or display)
  • Engines (All Gasoline & Diesel Systems)
  • Transmissions and Electronic Selector Modules
  • Airmatic and Active Body Control Suspension Systems
  • Traction Systems: ESP / ASR / ETS / ABS / BAS / SBC braking systems
  • Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM’s
  • Drive Authorisation System
  • Sam (Signal Acquisition) Modules
  • Electronic Ignition System (EIS)
  • Pneumatic System Equipment and ATA functions
  • Air Conditioning / climate control Systems
  • Instrument Cluster
  • Tyre Pressure Control
  • Parktronic System
  • Keyless Go
  • D2b Command & Audio Gateway (D2B and MOST networks)
  • TV Tuner
  • Headlamp Range Adjustment
  • Seat Electronics
  • Rvc, RST & Vario Roof modules
  • Automatic Clutch System ACS
  • M-Class Body Modules (AAM / EAM / DAS / SEM / VG Transfer Case)
  • Assyst & ASSYST + systems
Mercedes Benz Xentry diagnosis VCI DOIP Pasthru interface C6 Summary:
Mercedes Benz Xentry diagnosis VCI DOIP Pasthru interface C6 (Vehicle Communication Interface) multiplexer serves as the interface to the vehicle when performing diagnosis and repairs, and programming electric and electronic on-board vehicle systems.

The Mercedes Benz Xentry diagnosis VCI DOIP Pasthru interface C6 does not have its own PC core, battery, fan, or display. It is operated using the VXDIAG For XENTRY Diagnosis Pad via WLAN or a USB cable connection.


Notice  :
1.Please install the 500GB HDD on laptop above 4GB Memory and I5 CPU, and use it on one laptop only. If change laptop, software may get broken and need to ship HDD back to us to copy software again.

2.ThisMercedes Benz Xentry diagnosis VCI DOIP Pasthru interface C6 can/'t support All Key Lost,needs one key at least.

BEZN C6 OEM Diagnostic Tool PCB


Mercedes Benz Star diagnostic tool: C4 vs C5 vs C6
MB diagnostic/programming tool SD connect C4 Xentry Connect C5 Vxdiag C6 Benz C6
Image sd connect c4 XENTRY CONNECT C5 allscanner-vxdiag-benz-c6 benz-c6
Mercedes diagnostic software for PC Xentry/DAS Xentry/DAS 03.2020 Xentry/DAS 03.2020 Xentry/DAS 06.2020 Xentry/DAS 03.2020 Yes Yes Yes Yes Yes Yes Yes Yes
HHT-Win Yes Yes No No
ST Finder Yes Yes Yes Yes
SDMEDIA 2014 Yes Yes Yes Yes
PL72 Yes Yes Yes Yes
All MB from late 80's to 99 = HHT-WIN

All MB from 2001 to 2009 = DAS

All MB from 2010+ = Xentry
Mercedes development and engineering tool DTS Monaco Yes Yes No No
Vediamo Yes Yes No No
Vehicle coverage Passenger Car Yes Yes Yes Yes
Van Yes Yes Yes Yes
Truck Yes Yes Yes Yes
Unimog Yes Yes Yes Yes
Bus Yes Yes Yes Yes
Super Sports Car Yes Yes Yes Yes
Abilities Diagnostics Yes Yes Yes Yes
  Coding Yes Yes Yes Yes
  Flashing Yes Yes Yes Yes
  Programming Yes Yes Yes Yes
In summary,
SD connect C4 = SD C5
VXDIAG C6 = Benz C6
All can work for Mercedes-Benz diagnosis, SCN coding, flashing and programming.
But with, Allscanner VXDIAG C6 and Benz C6, you have no luck with HHT for the old Mercedes and cannot access to the engineering software (DTS and Vediamo)

Benz C6 DOIP Xentry Diagnosis FAQ:

Q: Can Mercedes Benz C6 works stably? Is its quality good or not? Comparing with MB SD C4, it supports DoIP, what are more differences? Can it run faster than C4?
A: Benz C6 quality is good without problem.
Comparing C4, it has different hardware; it supports DoIP protocol and it can’t work with old Mercedes while sdc4 can support old Benz models if running fine with the old software.
The running speed depends on the computer configuration, the engineers are already tested C6 and C4 have almost the same running speed on a same computer.

Q: Is the C6 software is activated before delivery?
A: The software comes with Keygen so the users can activate by themselves. Because it is bound with a computer, if the supplier help active before delivery then the user has to active again after receiving.

Q: Does Benz C6 come with SCN coding function? or the user has to pay it?
A: It supports online SCN coding only when the user has online account.

Q: Can Benz C6 DOIP work with trucks?
A: yes, it works with trucks.

Q: Whether the window10 can be installed.
A: The software is preinstalled by allscanner Company, with win7 64bit.

Q: Whether the Korean language is supported when installing software is installed.
A: Yes, it has Korean language, besides more popular languages.

Q: The manual says that only one computer can be installed, but if I want to use it on two laptops, can I buy it from the Internet?
A: Like C4, it is hard disk version, it allows you to use on two laptops but needs to active by yourself with the built-in keygen.

Q: How to update when a program is updated.
A: To pay the newest software to update.

Q: I would like to know whether the coding method and usage method are on video or not
A: It has the same usage method as MB STAR C4. 


Hot Sales on Autel and Xhorse and Launch, Fast EU Ship & No Tax

Shipping and delivery;Attention:

DHL: For MOST non-free shipping goods, default shipping method is DHL. Need 3-7working days on the way after dispatch the goods.
YANWEN Express: 7-14 working days on the way, no need to pay tax for most european counties.
EMS: 6-10 working days on the way. To Russian only send by EMS. For some remote area, if you do not want to pay remote fee, we can send it to you by EMS too.
Aramex: 5-10 working day. To most middle east counries. If you do not like this shipping method, please leave message on your order.
Flat airmail: 7-18 working days on the way. For remote area or holiday, need more time.

If you needs YANWEN express shipping or other shipping method like UPS, TNT, FedEx and so on, or you have special needs for your order, such as declared name and so on, please leave message on the order to notify us. Otherwise we will send the order as our usual practice.
As different country has different import policy, sometimes we will change the shipping method based on the counties and goods.
When you get the parcel, before sign for acceptance, please check the package to make sure the product is correct and no damage.

For any question, please contact us at:


Benz Software Registration,Installtion,activation

w 211 DTS diagnostic & programming CBF with BEZN C6 OEM DOIP Device

BenZ EPC & WIS Registration Demo

Vxdiag BENZ Xentry EPC WIS

BENZ C6 DOIP Xentry Diagnosis VCI Multiplexer WIFI Tool Unboxing

Benz 221 coding for XENTRY

Tech Service

Part 1.VXDIAG oem C6 Doip software registration and firmware update guide.

12019.12 Xentry and DAS do not need to be activated, use directly.
2Use one USB cable to connect VXDIAG OEM C6 and the computer to run DTS Monaco super engineering software (dts is activated with usb).
3epc, wis software activation steps:

 VXDIAG OEM C6 DOIP Software Registration & Firmware Update Guide 1
 VXDIAG OEM C6 DOIP Software Registration & Firmware Update Guide 2
Login account: admin, password: 12345
 VXDIAG OEM C6 DOIP Software Registration & Firmware Update Guide 3
 VXDIAG OEM C6 DOIP Software Registration & Firmware Update Guide 4
Note: after opening epc-wis browsed, if you can see lan-id is unknown, the reason is the computer wasn't installed with NIC driver or you need to uninstall and reinstall the NIC driver.
 VXDIAG OEM C6 DOIP Software Registration & Firmware Update Guide 5
 VXDIAG OEM C6 DOIP Software Registration & Firmware Update Guide 6

Driver installation:
 VXDIAG OEM C6 DOIP Software Registration & Firmware Update Guide 7
 VXDIAG OEM C6 DOIP Software Registration & Firmware Update Guide 8
1Open VX Manager (open, scroll down to download the newest version)
2Click on "Diagnostic", then "Benz" icon. If "Install" option light up click on it; if it is gray, driver is installed successfully (Note: the computer needs to be connected the network, OEM C6 needs to be connected to the car and one computer).
 VXDIAG OEM C6 DOIP Software Registration & Firmware Update Guide
 VXDIAG OEM C6 DOIP Software Registration & Firmware Update Guide

Part 2.VXDIAG Benz C6 "Initialization of diagnosis multiplexer failed" solution

Car model Benz Sprinters year 2011 / 2010 / 2012, using VXDIAG Benz C6 to diagnose and have fault (1-1)-1.501 9988: Initialization of diagnosis multiplexer failed.
Possible causes:
The link between the diagnosis multiplexer and the diagnostic socket is interrupted.
The link between the diagnosis multiplexer and the diagnostic unit is interrupted.
The voltage supply at the diagnostic socket (circuit 30 and (or) circuit 31) is faulty.
When using SDconnect, check the connection status using the Toolkit.

VXDIAG Benz C6 "Initialization of diagnosis multiplexer failed" error solution:
Install the Benz driver.
Download the " BENZ VCI Manager(Daimler) 20.04.08.exe" and directly install.
Good luck!

Learn more:
How to use Xentry License to get access authorization code?

Optional parts & accessories