As OEM diagnostic tool for Ford, VCM II provides full dealer diagnostic capabilities for most 16 pin Fords, including Ford vehicles from old to latest. Read/Clear DTCs, program ECUs, keys, PCM, ABS, Instrument Cluster, Air Bag, Injector Coding and so on. More function are added. This tool is the same as SP177-C/SP177-C1, same function, good quality.
OEM V108 VCM2 IDS for Ford Diagnostic Tool
Top 6 Reasons to Get VCM II:
1. IDS Software Version: V108.01( The package comes with a CD of the V101 version of the software, you can get the V108 version software for free by Link)
NOTE:
1. Software version isIDS V108, Calibration software: V81 (this calibration software on support PCM programming function for part ford cars, not all, Please pay attention).
2. Old version firmware cannot use V101/ V108 software, need update the firmware first. Then can use the latest software.
3. Please do not use original Ford V93.01 software,the device will not work.
4. For module programming, if it gets the error "Selection not available", please contact us, we will send you the ExtendProgramming file to solve.
IDS VCM2 Features:
1. The VCM II is the new Ford OEM diagnostic tool. It provides dealer-level diagnostics using the IDS software.
2. The VCM II provides full dealer diagnostic capabilities for most 16 pin Fords.
3. The VCM II is the brand new diagnostics interface from Ford for use with the Integrated Diagnostics Software (IDS).
4. The VCM II will be required for all new Ford vehicles and is backwards compatible with most 16 pin Fords.
It supports the Vehicle Measurement Module (VMM) and new Customer Flight Recorder (CFR).
5. The CFR replaces the Vehicle Data Recorder (VDR).
6. The VCM II has shock resistant rubber ends, making it suitable for garage and workshop environments.
7. The CFR is an optional cable that allows the VCM II to monitor and record live data streams. This provides an advantage for technicians when diagnosing.
With this Ford VCM II, you can do the following functions: (Most of these function only New Ford VCM II has, while old version Ford VCM does not have most of these functions)
1. Automatic vehicle recognition
2. Read & Clear Diagnostic Trouble Codes (DTCs)
3. Live Data-stream with Recording & Playback Functions for Main ECUs
4. Program New Keys
5. Guided Fault Finding
6. New Software Re-flash for Existing ECUs
7. Programming & Installation of new ECUs (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.)
8. Injector Coding
9. Set, Adjust or Remove Speed Governors
10. DPF Regeneration
11. Brake Bleeding
12. Steering Angle Resets
13. All Other Dealer Functions
Ford VCM II Software Display:
Package List:
1pc x VCM2 interface
1pc x OBD2 cable
1pc x USB cable
1pc x CD-DVD
1pc x Plastic box
Hot selling Autel & Xhorse & Launch, EU/UK Ship ＆ No Tax
Shipping and delivery;Attention:
DHL: For MOST non-free shipping goods, default shipping method is DHL. Need 3-7working days on the way after dispatch the goods. YANWEN Express: 7-14 working days on the way, no need to pay tax for most european counties. EMS: 6-10 working days on the way. To Russian only send by EMS. For some remote area, if you do not want to pay remote fee, we can send it to you by EMS too. Aramex: 5-10 working day. To most middle east counries. If you do not like this shipping method, please leave message on your order. Flat airmail: 7-18 working days on the way. For remote area or holiday, need more time.
Attention: If you needs YANWEN express shipping or other shipping method like UPS, TNT, FedEx and so on, or you have special needs for your order, such as declared name and so on, please leave message on the order to notify us. Otherwise we will send the order as our usual practice. As different country has different import policy, sometimes we will change the shipping method based on the counties and goods. When you get the parcel, before sign for acceptance, please check the package to make sure the product is correct and no damage.
Thread: How to change VCM2 serial number, enter test mode, and get a root shell
Posted by ColtB45,big thanks!
src: https://mhhauto.com/Thread-VCM2-Hacking
YOU ARE TRYING ON YOUR OWN RISK!
Here you are:
I have figured out how to change the serial number of the VCM2 as well as enter test mode, and get a root shell on it.
You'll need a microSD card for this to work.
1. Use IDS 86.
2. Recover your VCM2.
a. Describing how to recover is beyond the scope of this post. Search the forums for instructions.
b. After recovery your VCM2 should be at VCM2 FW version 2.1.1.5.
3. Wait about 90 seconds after the VCM2 beeps before proceeding. We are waiting for the SD card to be populated.
4. Unplug the VCM2 and eject the SD card.
5. Mount the SD card with a linux machine.
6. On the SD card open 'apps/vci-diags/hwtest-scripts/self-test.sh' for editing.
7. Add the following line to the file:
touch /etc/vci/config/testmode
8. Cleanly unmount the SD card and insert it back into the VCM2.
9. Plug the VCM2 unit into the computer and wait 90 seconds past beep before proceeding.
10. Launch IDS.
11. Go to system utilities
12. Select 'Launch Monitor Tool' and confirm on the pop up.
13. Select 'Run System Diagnostics' > 'Next' > 'Test a VCM II Module' > 'Next'
14. Once the test completes unplug, wait a couple seconds, and then re-plug the VCM2 into the computer.
15. Wait about 15 seconds past when the VCM2 beeps and point your browser to http://192.168.171.2
You are now in the test mode web server.
a. To set a new serial number select 'Set New Serial Number' and proceed with serial number setting.
The default serial number is: 1211-31605352
b. To get a root shell Telnet to 192.168.171.2 you will be dropped to a root shell without providing login credentials.
c. To stay in testmode at next reboot select 'Set Repair Test Mode'. This has to be done once per boot or you will have to go through this whole process to re-enable test mode.
Here Be Dragons:
To those who would go poking around, tread carefully. I accidentally ran cgi-bin/total-reflash and wiped my VCM2.
My bootloader was still intacted and available on pins 24 & 25 of the HDL26-PL-B connector.
![[EU Ship No Tax] FLY SVCI J2534 Diagnostic Tool Support Online Module Programming Supports Ford & Mazda IDS/ Toyota TIS/ SSD/ GDS2/ ELM327 Software](/upload/pro-sm/21060416227910301119.jpg)
