E/F Explorer for BMW
Attention: 1.There is the dongle in the package. Each dongle has the serial number, only can be used the same hardware in the package. So please do not lost the dongle in the package.
2.Please do not update online or use original software, therwise your BMW E/F SCANNER will be locked! And need send it back for repair
Latest software version: 2013.07
Supported model list:
1-series (E81, E82, E87, E88), 2003+
3-series (E90, E91, E92, E93), 2004+
5-series (E60), 2002-2010
5-series (F10), 2010+
5-series "Gran Turismo" (F07), 2009+
7-series (E65, E66), 2000-2008
7-series (F01, F02), 2007+
BMW X5 (E70), 2006+
BMW X6 (E71), 2007+
Mini Cooper (R56, R57), 2005+
List of supported ECU:
• Drive – 6 categories / 30 types; CAS, DME, EGS, EKPM, GWS, VTG
• Chassis – 12 categories / 15 types; ASR, CIM, DSC, EDC, EDCSHL, EDCSHR, EDCSVL, EDCSVR, EHC, EMF, RDC, VDM
• Body – 65 categories / 121 types; AHM, AMP, BFH, BFS, BZM, CCC, CDC, CHAMP, CIC, CID, DWA, ECL, FAH, FAS, FLA, FOMO, FRM, FZD, HKL, HUD, IHKA, JBBF, KBM, KGM, KOMBI, LMA, MASK, MMC, MMI, MPM, PDC, PGS, RAD, RFK, RLS, RSE, SASL, SASR, SBSL, SBSR, SD, SECUR, SFZ, SGM, SHD, SHZH, SIM, SSBF, SSFA, SSH, STVL, STVR, SZL, SZM, TEBF, TEFA, TEL, TMB, TMBH, TMF, TMFH, VID, WIM, ZBE, ZGM
DTC reading with clear text explanation, car setting adjustment, maintenance interval adjustment, key programming or blocking, remote control synchronization and much much more!
166 types of ECU supported
Diagnosis and interpretation of error codes
Reading and adjustment of run hours and maintenance intervals for: Oil, Filters, Brake pads, Spark plugs, Liquids, Inspections and services as well as СО, СН inspections etc.
Adjustment of mileage and maintenance intervals
Change/Adjust FA code (currently in test mode)
Read/Write RAM/FLASH/EEPROM *
Read/Write ISN (marriage CAS and DME/DDE) *
ELV Reset (steering wheel lock)
Key read/write via OBD2 in CAS2, CAS3, CAS3+
Key prog module for E/F-series
Learning key or transponder directly in the ignition lock!
Lost keys blocking/unblocking
Mileage correction module for E/F-series
Change AIF (indexes of programming)*
Reading the last saved mileage from ECU
VIN change *
New battery registration
NOTE: Instrument cluster and CAS1-CAS4 must be adjusted MANUALLY
software system which allows to read,decode and edit ISN password (It is sync password between ECU and immobilizer ) Correct checksum also calculated automatically
Procedure of used ECU installation in car with automatic transmission:
Install used DME/DDE
Switch ignition ON.
Connect BMW explorer,and run Quick test.
Go to EGS ,press Unlock EWS
Got to DME/DDE and read ISN
Switch ignition OFF,connect to CAS,write down old ISN,write ISN previously read from DME/DDE and save it.
Switch ignition ON
Go to DME/DDE and make synchronization procedure.
BMW Explorer Customer asked questions:
Q: Do you have the user manual for how to use this software?
A: This software is very easy to use. Insert the CD and connect the dongle with on your computer, then you can directly open the software. After you open the software, you will see the menu. Then you can choose the function in the menu.
Q: Can you send the software to me? I want to test the software first before i buy it.
A: We can send the software to you. But as you do not have the dongle, so you cannot open the software. We have attached the video on our website, you can see the video.
Q: I was wondering if the bmw explorer is completly unlocked?
A: All the function on this software is activated ready, you can directly to use it. No need to pay extra fee to open the software anthorization.
E/F SCANNER for BMW software screenshot shown: