New ICOM A2+B+C Diagnostic & Programming Tool for BMW with Software
Software no need enter password now, can directly run it.
Top 3 reasons to choose ICOM for BMW:
1) Perfect hardware version. Faster running speed
2) Multi-language: For both diagnose and programming, also TIS diagram circuit: English, German, Chinese, Korean, Russian (For other language, please choose item number PP061)
3) Supporting BMW and MINI vehicles from old to latest 2015 for full system diagnose and reprogramming function.
This ICOM for BMW is the perfect version. Compared with others, it has the following advantages:
1 Latest hardware and software:
ICOM A2 Hardware Version:
2. Fast running speed. This version BMW ICOM A2, software running speed increase 30%.
3. Fully-new Serial Numbers (S/N), work more stably. No blacklist.
4. Powerful engineer software: Reflash the hidden function of all BMW AG models, separately program each module, program and decode for the old parts that need to replace, change Human Machine Interaction (HMI) language (Note: The operator need to be very well qualified-like BMW engineer)
What should you pay attention to use this BMW ICOM:
1) DO NOT connect the internet or original factory servier.
2) DO NOT change the icom software setup
3) Change the PC time to the current time
4) NEVER TRY TO CRACK OR COPY OUR HDD.
Attention: From software 2014.1 version, start your car first, then connect the this BMW ICOM hardware with your car, wait until the system light of hardware does not flash, then use network cable to connect BMW ICOM hardware with your laptop. Please make sure you use BMW ICOM as this order, otherwise ista-p will close automitacally after open. DO NOT connect internet and the server of original when you use our software. Just follow our video to install and use it.
1) ICOM hard disk can run on most intel-based computers with 4GB RAM.
2) The Software install very easy, we test D630, D620, E6420, E6400 E49, E420, E430, G570, X201, X200, X201T, T60, T61, T400, X61T, X60, X60 computers, and other laptop with Intel chipset, such as I3 I5 / I7 series. No time limiation for use. Once insert hard disk into your computer can automatically install.
Super Version BMW ICOM A2+B+C Function:
A2- OBD diagnostic supporting MOST, D-CAN and K-CAN protocols
B - diagnostic via MOST bus, and have connection to A-interface via USB connection.
C - 20-pin cable for old models.
Super Version BMW ICOM A2 (SP168-BO) Firmware Update Steps and Note
1. Use Network cable to connect Super version BMW ICOM A2 (item NO. SP168-BO) with computer, charge Super version BMW ICOM A2 with 12V power adapter or connect Super version ICOM A2 with the BMW vehicle.
2. Open IE Internet Exploer, browse http://169.254.33.45:60080/, log in with username/password: root/NZY1150263
3. Click "Update Firmware", you will see ICOM firmware version information.
4. Choose file "ICOM-BootImage-01-13-00.bin", set image type to SYSTEM, click "Send the file".
5. When it pops up "Write the image file to the flash?", click "Yes", then ICOM indicator light will turn red.
6. When it pops up "The SYSTEM IMAGE update was successfull", click "Update Firmware".
7. Choose "ICOM-ApplicationImage-01-18-00.bin", set image type to APPLICATION, click "Send the file", it will spend several minutes since the file is a little bit large.
8. When it pops up "Write the image file to the flash?", click "Yes", then the ICOM indicator light will turn red for the second times.
9. When it finish upgrading, click "reboot".
1. Setting up your computer to obtain an IP address automatically
2. Firstly choose the smaller file "ICOM-BootImage-01-13-00.bin" , then set image type to SYSTEM;
Secondly choose the bigger file "ICOM-ApplicationImage-01-18-00.bin", then set image type to APPLICATION.
1pc x BMW ICOM A2 Interface
1pc x BMW ICOM B Most
1pc x BMW 20pin Cable
1pc x USB Cable
1pc x OBD2 Cable
1pc x LAN Cable
1pc x HDD (Based on the type you choose)
BMW ICOM A2 B C Lan cable connection photo display:
BMW icom software display: