Ship from UK, fast delivery and no tax!

Car ECU Programmer


Newest V5.017 Kess V2.47 ECU Programmer Online Version Support 140 Protocol No Token Limitation

Newest V5.017 Kess V2.47 ECU Programmer Online Version Support 140 Protocol No Token Limitation

85.99
  • Item No. SE137-C2
  • Out Of Stock

1. Online Version Kess V2 Firmware V5.017 support online service, newly add 140+ protocols,no tokens Limitation, program safer and more stable!
2. Newest software: Ksuite V2.47;Latest Firmware: V5.017
3. Get ECM TITANIUM V1.61 with 18475 DRIVER for free, sent online
​​​​​​​Newest K-Suite V2.47 Software , Newly Add  7400+  Vehicles

2014 UPA USB V1.3.0.14 With Full Adaptors (Choose SE98)

2014 UPA USB V1.3.0.14 With Full Adaptors (Choose SE98)

90.00
  • Item No. SE100-B
  • Out Of Stock

UPA USB 2014 is with software V1.3.0.14, and support English Language.

SMPS MPPS V13.02 Tuning Remap Chiptuning K+CAN Flasher Cable choose SE74

SMPS MPPS V13.02 Tuning Remap Chiptuning K+CAN Flasher Cable choose SE74

14.99
  • Item No. SE55
  • Out Of Stock

SMPS MPPS V13.02 Tuning Remap Chip tuning CAN Flasher is a USB chip tuning interface. This is good clone working with V13.02 version of software. This interface lets you to read and write memory of a car computer through the diagnostic connector.

V5.48 X-PROG Box ECU Programmer XPROG M support CAS4 5M48H

V5.48 X-PROG Box ECU Programmer XPROG M support CAS4 5M48H

73.00
  • Item No. SM44-B
  • Out Of Stock

The XPROG-box project is a continuation of the project XPROG and now supports more than 450 units (serial EEPROM's, Microcontrollers (MCU), Electronics Control Units (ECU), DashBoards, Immobilizers, Calculators and others).

New Metal Model XPROG-M Programmer V5.0

New Metal Model XPROG-M Programmer V5.0

62.99
  • Item No. SM11
  • Out Of Stock

The XPROG-m programmer is designed to replace the earlier version of XPROG programmer. XPROG-m programmer is fully upward-compatible hardware with XPROG programmer and have many additional features.
New version release: V5.0

FW V7.020 SW V2.25 KTAG K-TAG ECU Programming Tool Master Version with Unlimited Token Only Main Unit

FW V7.020 SW V2.25 KTAG K-TAG ECU Programming Tool Master Version with Unlimited Token Only Main Unit

54.99
  • Item No. SE135-F
  • Out Of Stock

FW V7.020 SW V2.25 KTAG K-TAG ECU Programming Tool Main Unit
1. Available Protocols: BDM MOTOROLA MPC5xx
2. Easy to use, automatically recognize ECU model, high stability.
3. Multi-Language available:English/French/Portuguese/SpanishItalian/Deutsch
4. Comes with software CD for Free
5. Can save your money to get the latest KTAG ECU Programming Tool
6. Get ECM TITANIUM V1.61 with 18475 DRIVER for free, sent online

UUSP UPA-USB Serial Programmer Full Package V1.2 B Yellow Color

UUSP UPA-USB Serial Programmer Full Package V1.2 B Yellow Color

59.00
  • Item No. SE37-B
  • Out Of Stock

UUSP UPA-USB Serial Programmer Full Package V1.2 B Yellow Color

New FGTech Galletto 2-Master V5.0 with BDM Adaptor and OBD Truck Connector

New FGTech Galletto 2-Master V5.0 with BDM Adaptor and OBD Truck Connector

35.99
  • Item No. SE61-D
  • Out Of Stock

2012 New FGTech Galletto 2-Master V5.0 with BDM adaptor
OBDexpress.co.uk provides it with high quality, one-year warranty and unlimited technical support.

MAG PRO2 V4.1 ECU tuning tool

MAG PRO2 V4.1 ECU tuning tool

79.00
  • Item No. SE36
  • Out Of Stock

MAGPro2 is a chiptuning system composed of several modules. Serial OBDII programming tool that allows the communication with a vast number of vehicles, allowing the reading and writing through the use of simple connections with simple and fast software.

KESS OBD Tuning Kit ECU Chip Tunning Tool choose SE87

KESS OBD Tuning Kit ECU Chip Tunning Tool choose SE87

62.50
  • Item No. SE31
  • Out Of Stock

KESS OBD Tuning Kit for read EEPROM and flash from ECU by OBD for car chip tuning. It can support EDC 15, EDC16 and other ECU.

Plug and Drive NitroOBD2 Performance Chip Tuning Box for Benzine Cars/Diesel Cars

Plug and Drive NitroOBD2 Performance Chip Tuning Box for Benzine Cars/Diesel Cars

5.45
  • Item No. SE119
  • Out Of Stock

35% More Power, 25% More torque
NitroOBD2 is a Plug&Drive Ready device to function the increasing the performance of engine.
NitroOBD2 is easy to install. Just plug it into the OBD2 connector of cars. NitroOBD2 fits all car from the year of 1996.

ECU Reader for VW, Audi, Skoda and Jetta

ECU Reader for VW, Audi, Skoda and Jetta

45.00
  • Item No. SE24
  • Out Of Stock

ECU Reader is an advanced tool for cars motor ECU internal EEPROM reading, writing and coding by OBDII connector. Compatible vehicle list: VW group(including VW, AUDI, SKODA and Jetta).

Original Wellon SmartPRO 5000U-PLUS Universal USB Programmer (Choose SE131)

Original Wellon SmartPRO 5000U-PLUS Universal USB Programmer (Choose SE131)

499.00
  • Item No. SE113
  • Out Of Stock

SmartPRO 5000U-PLUS programmer is High-speed FPGA driven hardware for ultra-fast programming, designed for versatile multi-applications, You have freedom to choose the optimum mode for your programming demands.

D80D0WQ 160D0WQ EEPROM Fast Eraser (About 10 Seconds)

D80D0WQ 160D0WQ EEPROM Fast Eraser (About 10 Seconds)

77.70
  • Item No. SO228
  • Out Of Stock

D80D0WQ 160D0WQ EEPROM Fast Eraser,power on and put on the IC card,erasing will done without ten seconds.

Original Universal S-100 S100 Ultra-High Speed Stand-Alone Device Programmer Replace Beeprog ( Choose SE144 )

Original Universal S-100 S100 Ultra-High Speed Stand-Alone Device Programmer Replace Beeprog ( Choose SE144 )

520.00
  • Item No. SE101
  • Out Of Stock

Universal S-100 S100 programmer completely replace beeprog or beeprog+, supports More than 300 IC manufacturer, More than 80000 pcs devices. Connection via 2.0 USB cable, fast reading and writing speed, widely used for research and development, quantity production of high-quality universal programmer.

NitroData Chip Tuning Box for Motorbikers M8

NitroData Chip Tuning Box for Motorbikers M8

38.50
  • Item No. SE56-M8
  • Out Of Stock

NitroData Chip Tuning Box for Motorbikers is a power box for bikes, with box you can get more power & torque for your bike. Power and Torque add 30%, Fule saving 10%.

Original Orange5 Professional Memory and Microcontrollers Programming Device with all Adapters

Original Orange5 Professional Memory and Microcontrollers Programming Device with all Adapters

955.00
  • Item No. SE125
  • Out Of Stock

Orange 5 is a professional programming device for memory and microcontrollers. Unique feature of the current series programmers is built-in macro language for writing down protocols, which gives fast and easy capability to add new types of micro schemes, precisely meeting manufacturers' requirements to read/write algorithms.

[UK Ship, No Tax] MPPS V21 MAIN + TRICORE + MULTIBOOT with Breakout Tricore Cable Support multiple languages

[UK Ship, No Tax] MPPS V21 MAIN + TRICORE + MULTIBOOT with Breakout Tricore Cable Support multiple languages

Latest price:48.00
35.0027% off
  • Item No. SE134-B
  • Out Of Stock

MPPS V21 MAIN + TRICORE + MULTIBOOT with Breakout Tricore Cable
1.Latest Software version: V21
2.Package comes with Breakout Tricore cable.
3.Warranty: one year

ECU SELF LEARN TOOL for TOYOTA

ECU SELF LEARN TOOL for TOYOTA

60.00
  • Item No. SE94
  • Out Of Stock

ECU SELF LEARN TOOL for TOYOTA can be easily and quickly programmed old and new ECU of toyota models directly via OBD port. Replace with new engine computer automatic programming, Supports ISO and CAN Protocols and more functions. Small, easy to use and carry, more competition on price.

MC68HC08 908 Motorola Programmer

MC68HC08 908 Motorola Programmer

65.00
  • Item No. SE13
  • Out Of Stock

MC68HC908AZ60 programmer supports Motorola MC68HC(9)08AZxx/ASxx, MC68HC05H12 microcontrollers internal EEPROM and FLASH reading, programming. This MCU most used in automotive computers (dashboards, AIRBAG, immobilizers).

Total 220 items, 20 items/p, current page 7/11.