FGTech Galletto 2-Master
Hardware version: V50
Good news: Dongles has been canceled. You can use it freely.
FGTech Galletto 2-Master EOBD2 Software free download.
Update mothod: by email
This is master version. It can support BDM-TriCore-OBD now.
(MPC5xx - EDC17 - Infineon TriCore - ST10Fxx - OBD2 (K-CAN)
Boot Mode System TriCore
Infineon Tricore Sak TC1766
Infineon Tricore Sak TC1767
Infineon Tricore Sak TC1792
Infineon Tricore Sak TC1796
Infineon Tricore Sak TC1797
NEW JTAG - BDM - MOTOROLA - FREESCALE - INFINEON
Freescale MPC 5553/5554/5565/5566 NEXSUS PORT New IAW MJD 8F2 - Mair 8GMF
New Delphy DCM3.5xx DCM3.7xx TRW
Motorola Freescale MPC 555/556/561/562/563/564/565
Motorola MC 68332 - MC YQQCU - MC 68377 Trionic 5/7/8 GM-OPEL-SAAB
Motorola MC 68376 Campi 01 Lamborghini - Lotus
Motorola MC 68336 MEMS D5 ROVER
Motorola ZC 439615 - ZC 439507 IAW FIAT - VAG
New Line OBD protocols VPM GM - Hummer-Corvette-Munstang-Blazer-Cadilac
New Line OBD protocols Tx-Rx - Subaru - Mitsubischi - Hitachi - Denso ecu
All EDC17 MED17 is good always modify with Boot Mode tricore.
All old protocols included from Bosch MExx / EDCxx / Marelli / Siemens / Delpy / Lucas / Denso
Boot Mode C167x / ST10, Boot Mode Infineon Tricore With password Bosch , Siemens
Motorola MC68332 - MCYQQCU - MC68377 , MC68376 , MC68336, ZC439615 ,ZC439507
Motorola Freescale MPC 555/556/561/562/563/564/565
Freescale MPC 5553/5554/5565/5566
5-30V Car / Industrial Vehicles, L line / K line KWP, CAN
Can Bus V2.0 50Kb > 1000Kb
J1850 VPW PWM GM -FORD
Rx Tx RS232,
Automatic setup Pull up K-L line 250, 500, 1000 ohm,
Automatic setup termination Can bus 0, 60,120 ohm
Recovery Mode Completa
Funzione scan tool per eliminare i DTC
Function scan tool for erase the DTC
Controllo tensione di batteria auto in tempo reale
Check tension of battery car in real time
NEW SYSTEM PROGRAMMING USB THROUGH THE TAKING OF DIAGNOSIS
The system comes complete with all Cars, Trucks, Traktors and bikes. New Boot Mode System Tricore Infineon Tricore Sak TC1766, Sak TC1767 *new Infineon Tricore sak TC1792,TC1796,TC1797,TC1767
READ / WRITE New BMW by OBD2 port.
The interface work with this Operating System:
Windows XP 32 e 64 bit
Windows Vista 32 e 64 bit
Windows 7 32 e 64 bit
Vehicle list please download from our technical service.
FGtech galletto 2 Language:
Software screen show:
PCB Board display:
BDM pictures shown:
Attention: If your fgch galletto is the oldest version with BDM function, with this BDM picture, your Galletto can support BDM also.
Customer frequently asked questions:
Q: Does this tool support tricore Boot mode?
A: Yes, it support all model including OBD and BDM.
Q: What is the difference between this 3 versions? Item No. SE61-C SE61-B SE61? I can see price is different but else I see no diference.
A: SE61-C and SE61-B are the update version of SE61, they almost have the same function as SE61, but we now have stoped to sell it. Because SE61 is more stable and more welcome among our customers.
Q: Do you have a power adapter for EUROPE with this SE61?
A: The package of SE61 has the adapter itself. SE61 use the 12V adapter. If your situation do not meer this, you can buy a power inverter from your local area and use it.
One customer can not open software after use this product on several cars. It is because the software is destroyed by the anti-virus software on your conputer. Faced this situation, you can download our usb fix tool on to fix your software. Our software does not has virus, please be sure to disable/uninstall anti-virus software when you install our software.
FGTech Galletto 2-Master EOBD2 Software: http://www.mediafire.com/?xtpf7in4gty7nai.
FGTech Galletto "USB fix tool" software: http://www.mediafire.com/?2mix2jerpcthtk1
FGTech Galletto Win8 driver free download:http://www.mediafire.com/?yqvajdxqln2dqat (This win 8 driver is produced by one of our customer. Now i share this driver with more customers. If your computer system is win8, you can try to use this driver on your computer. Any problem, please feel free to contact us.)
What will you do if you can not open your software?
If you can not open software after use this product on several cars. It is because the software is destroyed by the anti-virus software on your conputer. Faced this situation, you can download our usb fix tool on to fix your software. Our software does not has virus, please be sure to disable/uninstall anti-virus software when you install our software.
When i install the software, it will not move for one step, this is the photo. I can see the fgtech on my computer, how to solve this?
Solution: If you meet this problem, please change another computer to install. This problem is caused by your computer system. Your computer system is not compatible with this software, change another computer to install the software will be OK.
How to use FGTech Galletto 2-Master EOBD2?
ISTRUCTION FOR DECRYPT AND CRYPT SLAVE FILE
Clicking the "Master" button on your main EOBD window you can open the section
You have to load the crypted file of your slave in the first row, then write the
name of the uncrypted file in the second row and click on "Decrypt & Save" button.
Now you have saved the uncrypted file whit name like 2° row.
You can tuning the file and you have to crypt it again before sending your dealer.
For crypting you must load the crypted file recived in the first row of Crypt
section, then load the (uncrypted) tuned file in the second row and write name in
the 3° row of the final crypted file to send.
Now you can click on button "Crypt & Save" end Exit.
How to use BDM function?
1.When you open the FgTech software, you will see the tip as the following picture shows you, then you just need to click " OK "
2. On the screen to select the car model, choose BDM\JTAG, and then click " OK "
3. Select " Connect "
4. After the communication between ECU and the fgtech software, select " Read All " " Read ext flash " " Read Eeprom "
5. Attention for the power adapter connection and BDM cable connection, make sure that you don't connect it oppositely, Or it will damage the ECU.
6.Attention for the BDM ECU cable connection, can not make mistake for the cable color, please be carefull.
What will you do if your FGTech Galletto 2-Master can not support the BDM function?
Look at the picture, if your FGTech Galletto 2-Master can not support BDM function. You can change the chose chip to original HC14D chip. Please note, the HC14D chip must be original.
Any problem, you can feel free to contact us at sales@OBDexpress.co.uk