GODIAG A6 Automobile Smoke Leak Detector with Pressure Gauge Test Leak in Vehicle Pipe Systems for Cars, Motorcycles, Snowmobiles, ATV, Boats

Highlights:
 

【A6 Automotive Smoke Leak Detector】A6 automotive smoke machine is designed for testing leaks in all DC12V vehicles' pipe systems. It can easily check car sealing, throttle shafts, engine block, turbo test system, crankcase system, intake system, exhaust system, fuel tank system, EVAP system, EGR system, cooling system, various pipe fittings leakage problems.

【Built-in air pump】A6 Automotive smoke detector is built-in air compressor, not limited by the site. And the smoke machine is also equipped with pressure gauge and liquid observation window and overheat protection device, safe and user-friendly.

【DUAL MODELS Test】A6 Automotive smoke detector has two ways to quickly solve leaks. Air test mode can help you determine if there's a leak. And smoke test mode can help you locate leaks.

【Easy to operate】Only 3 steps to use the smoke detector: 1.Mount the Power Cords to the Power Inlets. 2.Mount the Smoke Tube to the Smoke Outlet, and lock it with the quick clamp. 3.Open the Oil Filler Port, fill smoke oil into the reservoir, note the Oil Level Indication Window, make sure the oil level do NOT exceed the Max line. If the smoke oil is overfilled, turn the unit upside down to drain some oil out. Now the smoke machine is ready to use.

【Wide Range of Applications & Lightweight】 The Smoke machine automotive can be use to test pipe systems on all cars, motorcycles, snowmobiles, ATVs, light trucks, and speedboats, compatible with all vehicle types(DC 12V Vehicles). The smoke detector features lightweight and simple design.

【PLEASE NOTE】The automotive smoke machine can not be connected to the 12V power supply in the office, or it cannot output the smoke. Smoke detector can just support a 12V battery with a current range of 8A-10A (Ordinary car batteries are eligible).

Prepare the Unit

1.Mount the Power Cords to the Power Inlets. 

Note: Red plug to red socket and black plug to black socket. 

2.Mount the Smoke Tube to the Smoke Outlet, and lock it with the quick clamp.

Note: Use the Velcro Strap to collect the Power Cords and the Smoke Tube before storage.

3.Open the Oil Filler Port, fill smoke oil into the reservoir, note the Oil Level Indication Window, make sure the oil level do NOT exceed the Max line. If the smoke oil is overfilled, turn the unit upside down to drain some oil out.

4. Now the unit is ready to use.

Note: Pay attention to the Oil Level Indication Window before use. If the oil level is close to the bottom, the unit will need a refill.

Test Run
 

1. Connect 12V vehicle battery with the clamps on the Power Cords. The Power Indicator will be ON and the unit will start generating air pressure. 

Note: red clamp to positive (+), and black clamp to negative (-).

2. Block off the smoke nozzle on the Smoke Tube with fingertip, the Pressure Gauge will indicate the real time output pressure. 

3. Switch on the smoke mode switch, the smoke mode indicator will be ON. The unit will start producing smoke.

Power Supply: DC12V /6A

Flow Rate: <8L/Min

Test hose:1.5m

Power cable:1.5m

Oil filling: 30ml

Air source: internal air pump

Size: 310 x 270 x 285mm

Gross weight: 5KG

Test pressure: 15psi

High temperature protection: YES

.

Package List: