1. GODIAG GT111 Test Platform: for VW/ Skoda/ Seat CAN-Bus 3rd & 3.5th generation dashboard IMMO key matching. With POGO PIN, supports VW/ Skoda/ Seat and other models using POGO PIN for offline data reading and writing. 2. GODIAG GT111 can be used with devices like HEX V2, VAGCOM VCDS 5053, VAS5054A, VAS6154, SUPER VAG K+CAN, SUPER VAG, AVDI, ZEDFULL, Xhorse (VVDI), OBDSTAR, Lonsdor, Autel, etc.
GODIAG GT111: for VW/ Audi/ Skoda/ Seat CAN-Bus 3rd & 3.5th generation dashboard IMMO key matching. With POGO PIN.
GODIAG GT111 Introduction:
GODIAG GT111 Test Platform: for VW/ Audi/ Skoda/ Seat CAN-Bus 3rd & 3.5th generation dashboard IMMO key matching. With POGO PIN, supports VW/ Audi/ Skoda/ Seat and other models using POGO PIN for offline data reading and writing.
GODIAG GT111 is used when performing synchronization testing of keys and IMMO instruments, intelligent IMMO system emergency start area sensing detection, IMMO combination instrument offline diagnosis, instrument IMMO data reading and writing, instrument mileage repair, key matching and other functions.
It can be used with devices like HEX V2, VAGCOM VCDS 5053, VAS5054A, VAS6154, SUPER VAG K+CAN, SUPER VAG, AVDI, ZEDFULL, Xhorse (VVDI), OBDSTAR, Lonsdor, Autel, etc.
GODIAG GT111 Features:
1. Use POGO PIN to read and write data on the dashboard
2. Offline connection to the dashboard to convert to standard OBD2.
3. Perform key chip and instrument synchronization test.
4. Independent ignition switch
5. Key induction adapter with light
6. The POGO PIN is more stable to hold and it does not damage the cable.
Intelligent IMMO System Emergency Start Area Induction Detection
Press the vehicle's start switch and bring the device's key identifier close to a certain area. If the key identifier light flashes or lights up, it means that the area is the vehicle's key emergency start sensing area. If the customer's smart key is out of power, just put the dead smart key in the key emergency start sensing area to start the vehicle.
Car IMMO Start and Start Key Chip Detection
Test Result Analysis:
1. The light of the key identifier flashes and then goes out, indicating that the IMMO chip and the chip key are working properly.
2. The light of the key identifier flashes for a long time, indicating that the chip key and the vehicle's IMMO system do not match, and the chip key needs to be re-matched.
3. The light of the key identifier does not flash, which means that the vehicle's IMMO system is faulty. Please check the vehicle's IMMO system.
Package List:
1pc x GODIAG GT111
Shipping Method and Delivery Time:
EU, UK , US and Russia Warehouse Shipping: 3-5 working days. Fast Delivery & Tax Free.
China Warehouse Shipping: DHL Shipping: 3-5 working days. Usually we declare a lower value on DHL invoice to help with customs clearance. Please remember to leave message if you have any special requirement. Yanwen Express: 7-10 working days. No Tax for European Countries. Standard Post: 7-15 working days. To South America and Africa countries it may take 20-25 working days. Customers can tick Express Shipping Service to ship by DHL.
GODIAG GT111 Test Platform: for VW/ Audi/ Skoda/ Seat CAN-Bus 3rd & 3.5th generation dashboard IMMO key matching. It can be used with devices like HEX V2, VAGCOM VCDS 5053, VAS5054A, VAS6154, SUPER VAG K+CAN, SUPER VAG, AVDI, ZEDFULL, Xhorse (VVDI), OBDSTAR, Lonsdor, Autel, etc.
GODIAG GT111 has the following main functions:
1. Use POGO PIN to read and write data on the dashboard
2. Offline connection to the dashboard to convert to standard OBD2
3. Perform key chip and instrument synchronization test
4. Independent ignition switch
5. Key induction adapter with light
6. The POGO PIN is more stable to hold and it does not damage the cable
GODIAG GT111 can be used with Xhorse VVDI2 to make dealer keys and conduct usability tests. Please refer to the figure below for the equipment and connection methods used.
After the connection is completed, go to the VVDI2 PC software interface for operation.
Perform some common functional tests. Start with diagnostics: [Read DTCs] -> [Clear DTCs], everything is OK.
Go to IMMO Function: Key Learn. Select the appropriate dashboard.
Test function:
Read Immo Data, everything is OK.
Read KM, everything is OK.
Read EEPROM, still OK.
The operation must be disciplined. Before proceeding to the next step, click [Save File] to save the data.
Click [Make Dealer Key] to start making the key, check [Prepare OEM key], and click [Next]
Prepare OEM key: need special key or OEM key. You must provide an original key ID to prepare OEM key, the OEM key can do online operation. OEM key can start engine directly for 4th immo system. For 5th immo system need learn again.
Input VVDI super transponder to VVDI2 programmer and continue. (Note: If the chip is used, it needs to be wiped clean first)
When the production is completed, the PC software will prompt: Key make okay and locked!
Put the VVDI super transponder into GODIAG GT111 for testing and confirm that the key can be used normally.
This flashing indicates that the key is not recognized
If it turns off for 3 seconds, the key is not recognized or the key chip does not match.
If you want to use GODIAG GT111 to identify the key that has been matched, you can directly put the GT111 key identifier on the key.
1. The light of the key identifier flashes and then goes out, indicating that the IMMO chip and the chip key are working properly.
2. The light of the key identifier flashes for a long time ndicating that the chip key and the vehicle's IMMO system do not match, and the chip key needs to be re-matched.
3. The light of the key identifier does not flash which means that the vehicle's IMMO system is faulty Please check the vehicle's IMMO system.
