LAUNCH X431 Creader Elite 2.0 FGC Support Ford/ GM/ Buick/ Cadillac/ Chevrolet/ Chrysler/ Dodge/ Jeep vehicles.
In addition, Creader Elite 2.0 FGC also supports auxiliary functions such as purchasing software in the mall, viewing diagnostic reports, diagnostic record playback, screenshots and sharing, etc., to meet users' comprehensive needs.
LAUNCH X431 Creader Elite 2.0 FGC Features
Full Bidirectional Control: One touch to Auto VIN all available systems to read/ clear codes, view live data stream in graphing/ text, retrieves freeze frame, read ECU info, perform active tests to check the work status of modules like ECM, TCM, ABS, SRS, BCM, BMS, TPMS, SAS, etc, etc.
OE-Level Full Systems Diagnosis: One touch to Auto VIN all available systems to read/clear codes, view live data stream in graphing/text, retrieves freeze-frame, read ECU info, perform active tests to check the work status of modules like ECM, TCM, ABS, SRS, BCM, BMS, TPMS, SAS, etc,.
Full OBD2 functions for All Cars: No Limit for Ford,GM,Chrysler, fit for 99% cars brands.Read/ Clear Codes, Live Data, Freeze Frame, Vehicle Info., Clean the MIL, I/M readiness, O2 Sensor Test, On Board Monitor(Mode 6), EV-AP System(Mode 8), etc. Help you pass emissions tests without going to repair shop.
Lifetime Free WiFI Updates: One-Touch update via WiFi to enjoy more functions. When the newer version software is released, there will be a real-time notification upon the "Upgrade" icon in this obd2 scanner. With simple one touch, you'll get this LAUNCH obd scanner updated. NO extra Fees!
10+ Languages Provide Better Diagnostic Understanding: 1. English 2.Traditional Chinese 3.Spanish 4.French 5.German 6.Italian 7.Russian 8.Portuguese 9.Japanese 10.Korean
LAUNCH X431 Creader Elite 2.0 FGC Functions:
1. ABS Bleeding:
When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity
2. Oil Lamp Reset:
Close the oil service light, reset service mileage & service interval after replacing the engine oil, and the next maintenance calculation cycle is entered.
3. SAS Reset:
Learn to correct the angle and solve the problem of the steering angle of the steering wheel.
4. Injector Reset (Injector Coding):
The engine injector has a code. After replacement, you need to write a new code into the computer so that the car computer can correctly identify the injector.
5. TPMS Reset:
When replacing TPMS sensors or the signal from the sensor is lost it can quickly look up the tire sensor from the vehicle's ECU, reset tire pressure and turn off the tire pressure MIL
6. EPB Reset (Electronic Parking Brake Reset):
After replacing the brake pads, you need to reset the position of the brake pads before installing the new brake pads to close the warning light.
7. Gear Learning:
The vehicle has a crankshaft position sensor. This sensor collects the 58-tooth signal of the flywheel to determine the top dead center ignition time of a cylinder (reference signal). If this sensor is replaced, the reference will be lost, and gear signal learning is necessary.
8. Throttle Calibration:
A throttle position sensor is a sensor used to monitor the air intake of an engine, which provides the ECU with information on whether the throttle is in the idle position, wide-open throttle (WOT) position, or somewhere in between these extremes. After the throttle is cleaned, the throttle opening needs to be re-adjusted to improve vehicle performance.
9. AFS Reset:
It can detects the ambient light and then decides whether to turn on the headlights automatically. It can also adjust the headlights in time by monitoring the speed of the vehicle and the posture of the body.
More Hot Service functions:
10. Sunroof initialization
11. EGR Adaption
12. Crank/ Cam Position Sensor Adaptive Learning
13. DPF Regeneration
14. Air Suspension Height Calibration
15. Battery Matching
16. Seat Calibration
17. Door Window Calibration
18. Height Calibration
19. Transmission Adaption Learn
20. SRS Reset
21. Crank Case Pressure Sensor Relearn
22. Read/ Set Injector Codes
23. Reset Air Conditioning Compressor
24. Transport Mode
25. Selflearning Cycle
26. Stop/ Start Reset
27. Idle CO Adjust
28. Gearshift Position Learn
29. Tyre Reset
30. Gear Selector Sensor Calibration
31. Clutch Matching
32. Clear Adaptive Data
33. Rain Sensor initialization
34. Diesel Exhaust Fluid Level Check
35. Intelligent Cruise Control
36. Engine Power Balance Monitoring
37. Motor Angle Calibration
38. GPF regeneration
39. Coolant Bleed
40. NOx Sensor Reset
41. Clutch Reset
42. Motor Replacement
43. Read ECU Configuration
44. HVAC Actuator initialization
45. Alarm Triggers
46. Ignition Cycle Counter Reset
47. Fuel Tank Volume
48. Multimedia Video Reset
49. Adblue Reset
50. Mechatronics adjustment
More Features Keep Growing...
Note: All special features are free, no need to buy any special features in the mall. Special features are placed in the diagnostics screen, here is the path to find all free features：Select Diagnose > Select Car Model, Year > Run Autovin > Select Module > Special Functions!
Product Specifications:
| Items |
Specifications |
| Screen |
3.97 inches |
| interface |
Standard OBDII interface |
| Android version |
Android 8.1 |
| Storage |
2+16GB |
| Battery |
3000mAh |
| CPU |
1.3G |
| Communications/Upgrades |
WIFI 2.4Ghz （b/g/n） |
| weight |
<540G |
| Storage temperature |
-20~ 70 ℃ |
| Operating temperature |
-10 ~50 ℃ |
Package includes
1pc x diagnostic equipment,
1pc x diagnostic main cable,
1pc x manual,
1pc x quick start
