Lexia-3 lexia3 V48 PP2000 V25 for Peugeot and Citroen Support 307/C5 with Diagbox V7.83 Software
PP2000: V25 (This one should be installed on XP system)
Attention: Install PP2000 Lexia software and Diagbox Software on different PC. They cannot be installed on the same PC.
What is the difference for SP08-C leixa 3 and SP08-D lexia 3?
1) SP08-C lexia 3 is made by original chip. it is more stable
2) SP08-C lexia 3 support Peugeot 307 models
3) SP08-D lexia 3 has one more cable than SP08-C lexia 3.
Compatible Vehicles
1. It is compatible with Citroen cars including: C1,C2,C3,C4,C6,C8,C-CROSSER,NEMO,BERLINGO,JUMPY,JUMPER,AX,SAXO,BX and so on. But please pay attention, according to our customer's experience, this item can not works good at C5 new models.
2. It is compatible with most Peugeot cars after 1995.
3.Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars, pre-2001).
Function:
Unlike other universal car scanner tools which only read fault codes; this software performs nearly ALL the functions like the original dealer diagnostic tool. Our diagnostic interface contains K-Line multiplexor, CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
1.Read identification
Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc...
2. Read fault codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.
3. Clear fault codes
this function clears all stored fault codes and other diagnostic information.
4. Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
5. Measured Values
Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis.
6. Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)
Specification:
1.Hardware and software requirements
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.
If customer requires, we can prepare ready to work PC.
Customer Frequently Asked Questions:
Q: Can i install the software on the laptop with Windows 7 operating system?
A: PP2000/Lexia-3 can be installed in the laptop with Window XP operating system.
Q: This product can be used to diagnose Citroen C5?
A: Dear friend, sorry to tell you that this one is not good at Citroen C5. If you want to diagnose this one, our autocom 3 in 1 and FR704 are good choice.
Q: When i install the Diagbox software, it asks the dealer code for me. What is that, can you explain it for me?
A: Your operation is wrong. This software does not need dealer code. There are 3 videos in the CD. Please follow the video to install the software. Do the same step.
Package including:
1pc x Main unit with extension OBD2 cable
1pc x Long 9pin to USB cable
1pc x Short 9pin to USB cable
1pc x OBD2 cable
1pc x Instruction for Installation and Activation DVD for PP2000
Main board photo shown:
What should you pay attention for lexia 3 PP2000 software activation
1: Lexia-3 Setup Instruction
PP2000 is the Software for Peugeot !
Click 'InstPC' to install
LEXIA3 is the Software for Citroen !
Click 'Instlex3' to install
2: *Important Note:
Please create a blank txt file named "version" in C:\ before installation of LEXIA3
Otherwise it will display a warning as follow:
Install software. Before installation, windows system needs to be English, and until in choosing Language during installation of software, you are free to choose your mother language.
Activate software. Under the file "LEXIA3_KEYGEN", there are the activation pictures for lexia3 and the file "PP2000_KEYGEN" contains the activation pictures for PP2000.
It needs registered code for PP2000, but no registered code for lexia3, as for the registered code.
4: Lexia-3 Citroen/Peugeot Diagnostic activation & Lexia-3 language available & Lexia-3 setup note
Lexia-3 is a universal diagnostic tool for Peugeot and Citroen sharing one main host and packed with two version software (PP2000 for Peugeot and Lexia3 for Citroen). Please check the "Related Download Files". It will help you know how they two version work under just one simple unit.
5: Lexia3 for Citroen language options:
Slovenian, Spanish, Swedish, Turkish, German, Chinese, Croatian, Czech, Danish, French, English, Greek, Hungarian, Italian, Japanese, Nederlands, Polish, Portuguese, Russian, Finnish
6: PP200 V21 for Peugeot Language:
Turkish, Thai, German, Arabic, Chinese, Croatian, Danish, Farsi, French, English, Greek, Hebrew language, Hungarian, Indonesian, Italian, Japanese, Nederlands, Norwegian, Polish, Portuguese, Russian, Finnish, Slovenian, Spanish, Swedish, Czech
7: When i register, i meet the problem "the activation code is not valid (error code 11)", what should i do?
This is the error picture:
For this problem, the reason is that your keygen information is wrong. Here is the screenshot of the keygen. The munber of the version information in the red frame is wrong, please change it to "LEXIA-348", then you can register successfully.
8: Hardware and software requirements:
Software requires at least Intel Celeron/Pentium III 400 MHz, 128 MB RAM, 50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.
If customer requires, we can prepare ready to work PC.
Please setup the software according to the requirements to hardware and software. Otherwise it will fail to setup and take you much trouble.
9: When i install the driverbox software, i meet the following prompt: error 0, Fallo de actication (Activation failure)
This is because this driver box is not compatible with your computer. Ask the software link from us if your device is bought from us. And reinstall the software again. Do not use the one on the CD of lexia 3 package. Or ask us to resend the driver box software CD to you.
Notes:
1. Be sure to disable/uninstall anti-virus software
Please note,anti-virus software can flag up this item software as having a virus. This is a false positive and is due to the software containing the application file. So Before setup the device software, please disable/uninstall anti-virus software or install a more reliable free virus scanner! Our this item software is completely safe and virus free and all other virus scanners confirm this.
If the software data is destroyed or lost because you forget to disable/uninstall anti-virus software, please contact our customer service, we arrange to resend you CD or send you the software via internet.
2. Required windows operation system is windows XP
Be sure to setup and run the device software under windows XP. Otherwise the device software and program can be broken or it will fail to work.
Lexia 3 Fails To Communicate And Can't Read Ecu Issue
Lexia 3 with Diagbox V7.57(item SP08-C) is the best lexia diagnose tool among all the lexia 3 we sell on the shop. It has original 921815C chips inside, and it is also fully compatible with Peugeot 307/C5.
Recently, we got some customers feedback, They meet problems with:
If you also meet the problems as mentioned, there is a problem with the chip which is circled (see following pic), pls replace a new chip for it.
Any help, pls do not hesitate to contact our customer service
WhatsApp: +86-18750906257
Skype/Mail: sales@OBDexpress.co.uk
Any problem, you can contact us at sales@OBDexpress.co.uk
