LKE is a car smart key emulator newly released by Shenzhen Lonsdor Technology co.,ltd, as an ancillary product for K518 device. It supports functions such as collect data(sent from automobile ignition coil) to detect the coil fault and decode car keys; simulate key chip(4D and 46 chip are supported currently, more chip types to be continued). It’s lightweight and convenient, and can match all the vehicle models with 4D or 46 chip by working with K518. Meanwhile, LKE adopts low-power design, and has CR2032 button battery installed externally, which is easy to replace batteries and can avoid damage to casing. It can be upgraded through K518.
Lonsdor LKE Smart Key Emulator 5 in 1 for Lonsdor K518 Key Programmer
Lonsdor LKE Smart Key Emulator=
SKE-LT Smart Key Emulator 4pcs+ SKE-LT-DSTAES 128 Bit Smart Key Emulator 1pc
Features of Toyota/Lexus smart key all lost(5 emulators-in-1):
No need networking
LKE can be used to work as an emergency key to program when no dedicated chip.
By collecting data to decode and copy chip, LKE currently supports some 46 and 4D chip copy.
Simulate and convert chip
Use [Generate chip] to make various chips, part of 4D/46 and SKE Toyota currently supported.
Decode 46 and 4D chips to obtain SK.
Identify ignition coil and key chip type(all key lost)
As K518 helper:
1. Toyota/Lexus smart key programming via OBD for all key lost; Support “94/4D, 98/39(128 bit), 88/A8, A9” smart key offline programming via OBD
2. Chip generation; Generate emergency key to start the car when the dedicated chip is not available
3. Chip copy; Copy chip via collect and decode chip data (Cover wide range of vehicle models, faster)
4. Chip simulation and conversion; Generate various kinds of chip in urgent situation
5. Chip decode; Support code calculation for most 46 smart key and blade key (include 4D)
6. Identify the working statue of the ignition coil and the type of key chip (Support all key lost)
7. Work with K518 to program Hyundai/Kia without PIN code
8. Work with K518 to program BYD without PIN code
9. Work with K518 to program Porsche Cayman, Boxster without PIN code
10. Work with K518 to program Mitsubishi (46/47) all key lost via OBD
place one end of antenna into K518 card slot to operate.
State ① start to work. (the light will go on)
State ② collecting...( the light will flash)
State ③ finished. ( the light will go out after 3 secs)
(1)Simulate key chip
Boot K518 device, place LKE into K518 card slot, go to "Special function" in the menu interface and choose "Analog chip->Generate analog chip" to generate 46 and 4D chip, then you can generate various car key chip according to demand, for example, 46 chip can be used to generate key chip for vehicle models like Great wall motor, Zotye auto, Geely and etc; 4D chip can be used to generate key chip for Toyota, Lexus, Subaru and etc.
(2) Collect data
This function is currently used to collect data to decode chip, and can copy original car chip data after chip is decoded. Boot K518 device, place LKE into the card slot, go to "Special function" in the menu interface and choose "Decode chip", you can decode different types of chip.
(3) Detect ignition coil fault and chip type
Boot K518 device, place LKE into the card slot, go to "Special function" in the menu interface and choose "Ignition coil->Detect ignition coil " to detect whether the coil is normal and identify chip type.
(4) Upgrade functions
Boot K518 device, place LKE into the card slot, in the interface of "Special function", click function icon, the system will notify whether to update, click OK to upgrade online directly.
3. Instructions for use
Boot K518 device, click "Special function" icon and choose corresponding functions (such as Identify© chip, Analog chip, Decode chip, Ignition coil) and operate as per system prompts. When it starts to work, signal light will go on; when at work, the light will flash; when finish work, the light will go out after 3 secs.
(1) Device size: 68mmX37mmX11mm
(2) Battery: CR2032
(3) Standby current: 3.5ua
(4) Working current: ≤4ma
1pc x LKE car key emulator
Shipping and delivery;Attention:
DHL: For MOST non-free shipping goods, default shipping method is DHL. Need 3-7working days on the way after dispatch the goods.
YANWEN Express: 7-14 working days on the way, no need to pay tax for most european counties.
EMS: 6-10 working days on the way. To Russian only send by EMS. For some remote area, if you do not want to pay remote fee, we can send it to you by EMS too.
Aramex: 5-10 working day. To most middle east counries. If you do not like this shipping method, please leave message on your order.
Flat airmail: 7-18 working days on the way. For remote area or holiday, need more time.
If you needs YANWEN express shipping or other shipping method like UPS, TNT, FedEx and so on, or you have special needs for your order, such as declared name and so on, please leave message on the order to notify us. Otherwise we will send the order as our usual practice.
As different country has different import policy, sometimes we will change the shipping method based on the counties and goods.
When you get the parcel, before sign for acceptance, please check the package to make sure the product is correct and no damage.
For any question, please contact us at: